Rear Bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

centsless · 12-14-2006, 07:11 PM

I have had a few questions about the rear bumper on my truck, so I wanted to post a few pictures. It is a factory step bumper from an 88-98 Pickup. The OE 88-98 brackets are welded to a piece of flat steel, then the plate is bolted in the OE mounting holes. It fits surprisingly well for being the wrong year for the truck. Looking from the back it looks perfect, but from the side it is lower than the quarters.
Attachment 230462

Attachment 230463

bad_turbo · 12-14-2006, 10:37 PM

I know I'm not the expert here, but some how I missed your question.

68GMC454 · 12-14-2006, 11:55 PM

so whats the question..from the second pic,,it looks to sit to low,,like it doesnt really fit the truck..if that makes sense..it looks like if you went into a driveway around where i live,,you could catch it and rip it off or bend it..but you got an nice truck..
billy

el curioso · 12-15-2006, 01:27 AM

uHHH SURE!!

kyull67 · 12-15-2006, 01:33 AM

Plastic bumper?

BowTieOgre · 12-15-2006, 01:38 AM

I think he was saying that people have asked him questions about his bumper and he just wanted to give everyone details and pics so he wouldnt get any more questions........except I HAVE a question now that I have seen it. What made you put that one on there instead of a nice sport bumper?

**Roland** · 12-15-2006, 01:45 AM

If you are wanting to just raise the bumper so it is more in line with the bottom of the bedside, it looks like there is room to do that (I think I see a gap between the bottom of the tail gate and the top of the bumper.) You should probably lie down and look and "imagineer" how the brackets have to be changed to accomplish what you want. The bumper really does look good on the truck.

70c10 · 12-15-2006, 08:35 AM

Bob, as cool your truck looks with the new lowered stance, I say go with a roll pan to complete the look

I'm going with a roll pan eventually

72armyswbtruck · 12-15-2006, 03:00 PM

OK your right, it looks food from the back, pretty easy thing to do?

1LoC10 · 12-15-2006, 03:09 PM

Quote:

Originally Posted by 72armyswbtruck

OK your right, it looks food from the back, pretty easy thing to do?

mmm... food, I think it looks good, maybe raise it up if you can

jimmydean · 12-15-2006, 03:44 PM

I like it, I think it does fit rather nice. Not sure how much room you have with the gate down, but if you could bring it up a little, it would fit better.

I am going with a stock cheap steel bumper myself.

67ChevyRedneck · 12-15-2006, 03:45 PM

It looks like if you trimmed the piece off the back under the tailgate that you could raise it a good 2". I like how it looks back there, but it would look even better 2" higher

Take the plastic off, cut the back piece off, put a little paint on it so it doesn't rust, put the plastic back on, raise bumper, truck will look awesome

gmcman7202 · 12-15-2006, 03:48 PM

i like how it looks, but it does need to go up a little, the gap between the bumper and the tailgate is jsut a little to much, i wonder if the front of the same style will work on these trucks also...

soulman67 · 12-15-2006, 03:55 PM

you can bring it up higher to line up with the quaters and the tailgate will still open. I had one on a 67 that I had in high school looked good, I traded the truck to a fellow board member about 3 years ago. I am going to be putting one on my new 67 as soon as I find where my spare one is.

nevada70chev · 12-15-2006, 04:34 PM

if it was raised, would the tailgate hit when the gate is down? also, centsless, do you have pics of the way it is mounted (pics of it from underneath)? thanks.

Sweet72 · 12-15-2006, 04:47 PM

I think he's asking for food in exchange for the newer style bumper so he can get the roll pan he's always wanted anyone else confused?

Sorry, just thought the first few replies were funny! Bumper looks good on there centsless!

centsless · 12-15-2006, 05:45 PM

Quote:

Originally Posted by BowTieOgre

I think he was saying that people have asked him questions about his bumper and he just wanted to give everyone details and pics so he wouldnt get any more questions........except I HAVE a question now that I have seen it. What made you put that one on there instead of a nice sport bumper?

That was it!!! A few people have asked to see pictures and this was the easiest way to show them. I am removing this setup and buying a new sport bumper after Christmas. I have the brackets and am just waiting to buy the bumper. Here are the pics of the brackets, and with the tailgate open. There is room to move the bumper up about 2 inches.
Attachment 230636

Attachment 230637

Attachment 230638

Attachment 230639

corn · 12-15-2006, 07:47 PM

No question about it, that is one sharp truck with whatever bumper it has!

centsless · 12-16-2006, 12:07 AM

Quote:

Originally Posted by cornfed63

No question about it, that is one sharp truck with whatever bumper it has!

Thanks!!

nevada70chev · 12-16-2006, 11:49 AM

thanks, pics are always helpful. which bumper are you getting?

12-14-2006, 07:11 PM	#1
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Rear Bumper I have had a few questions about the rear bumper on my truck, so I wanted to post a few pictures. It is a factory step bumper from an 88-98 Pickup. The OE 88-98 brackets are welded to a piece of flat steel, then the plate is bolted in the OE mounting holes. It fits surprisingly well for being the wrong year for the truck. Looking from the back it looks perfect, but from the side it is lower than the quarters. Attachment 230462 Attachment 230463 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:45 PM.

12-14-2006, 10:37 PM	#2
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: Rear Bumper I know I'm not the expert here, but some how I missed your question. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

12-14-2006, 11:55 PM	#3
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: Rear Bumper so whats the question..from the second pic,,it looks to sit to low,,like it doesnt really fit the truck..if that makes sense..it looks like if you went into a driveway around where i live,,you could catch it and rip it off or bend it..but you got an nice truck.. billy __________________ honestly honey,,i have no idea how that truck got here. Last edited by 68GMC454; 12-14-2006 at 11:56 PM.

12-15-2006, 01:27 AM	#4
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: Rear Bumper uHHH SURE!! __________________ 1969 Chevy C-10 350/700r4

12-15-2006, 01:33 AM	#5
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: Rear Bumper Plastic bumper? __________________ The first '67 The current '67 '63 Biscayne

12-15-2006, 01:38 AM	#6
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: Rear Bumper I think he was saying that people have asked him questions about his bumper and he just wanted to give everyone details and pics so he wouldnt get any more questions........except I HAVE a question now that I have seen it. What made you put that one on there instead of a nice sport bumper? __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

12-15-2006, 01:45 AM	#7
Roland Junior Member Join Date: Nov 2006 Location: Brandon, MS Posts: 134	Re: Rear Bumper If you are wanting to just raise the bumper so it is more in line with the bottom of the bedside, it looks like there is room to do that (I think I see a gap between the bottom of the tail gate and the top of the bumper.) You should probably lie down and look and "imagineer" how the brackets have to be changed to accomplish what you want. The bumper really does look good on the truck.

12-15-2006, 08:35 AM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Rear Bumper Bob, as cool your truck looks with the new lowered stance, I say go with a roll pan to complete the look I'm going with a roll pan eventually __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

12-15-2006, 03:00 PM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Rear Bumper OK your right, it looks food from the back, pretty easy thing to do? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

12-15-2006, 03:44 PM	#11
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Rear Bumper I like it, I think it does fit rather nice. Not sure how much room you have with the gate down, but if you could bring it up a little, it would fit better. I am going with a stock cheap steel bumper myself.

12-15-2006, 03:45 PM	#12
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Rear Bumper It looks like if you trimmed the piece off the back under the tailgate that you could raise it a good 2". I like how it looks back there, but it would look even better 2" higher Take the plastic off, cut the back piece off, put a little paint on it so it doesn't rust, put the plastic back on, raise bumper, truck will look awesome __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 12-15-2006 at 03:56 PM.

12-15-2006, 03:48 PM	#13
gmcman7202 Active Member Join Date: Oct 2006 Location: wi Posts: 190	Re: Rear Bumper i like how it looks, but it does need to go up a little, the gap between the bumper and the tailgate is jsut a little to much, i wonder if the front of the same style will work on these trucks also...

12-15-2006, 03:55 PM	#14
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Re: Rear Bumper you can bring it up higher to line up with the quaters and the tailgate will still open. I had one on a 67 that I had in high school looked good, I traded the truck to a fellow board member about 3 years ago. I am going to be putting one on my new 67 as soon as I find where my spare one is. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

12-15-2006, 04:34 PM	#15
nevada70chev Registered User Join Date: Jul 2001 Location: reno, nv Posts: 646	Re: Rear Bumper if it was raised, would the tailgate hit when the gate is down? also, centsless, do you have pics of the way it is mounted (pics of it from underneath)? thanks. __________________ 70 LWB, 350/350 A/C, P/S, 3 Tone Paint (white cap, primer gray with black guide coat)

12-15-2006, 04:47 PM	#16
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: Rear Bumper I think he's asking for food in exchange for the newer style bumper so he can get the roll pan he's always wanted anyone else confused? Sorry, just thought the first few replies were funny! Bumper looks good on there centsless! __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.



Register or Log In To remove these advertisements.

12-15-2006, 07:47 PM	#18
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Rear Bumper No question about it, that is one sharp truck with whatever bumper it has!

12-16-2006, 11:49 AM	#20
nevada70chev Registered User Join Date: Jul 2001 Location: reno, nv Posts: 646	Re: Rear Bumper thanks, pics are always helpful. which bumper are you getting? __________________ 70 LWB, 350/350 A/C, P/S, 3 Tone Paint (white cap, primer gray with black guide coat)

Register or Log In To remove these advertisements.