f/s 78 1ton 4x4 3+3 in Indiana - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Troy-Built · 12-26-2006, 09:33 AM

The body is junk (you can throw a cat through it)but drivetrain is all intact. This is a single wheel not a dually. I bought this from the original owner. It has been sitting in the pasture for ten years but all of the tires were up but one. They parked it because the body was falling off of it (go figure). Obviously, it has a Dana 60 front with 4:11's with rear 14 bolt with positrac. It has a 350 (believe it or not it isn't stuck)4 speed with a 205 transfer case. There are quite a few options on the truck including air, tilt wheel, factory tach and rear slider. I would like 1500 out of the truck. It is already on my trailer ready for delivery. lol I bought this as package deal with a 69 3/4 4x4 Chevy. I can add picture if needed.
Thanks Troy

JTK20 · 12-29-2006, 05:30 AM

Dumb question, but what exactly does "3+3" mean? Does that mean it's a crew cab?

*trkklr77* · 12-29-2006, 10:25 AM

yes

Troy-Built · 12-29-2006, 10:26 AM

Yeah, it's a crew cab. If guys are just wanting certain parts let me know.

**ScottH** · 12-29-2006, 11:04 AM

Would be interested in the tach cluster and rear bumper if in good condition.

Thanks

BIGCHEVYMAN · 12-29-2006, 03:52 PM

lets see a few pics

toomanytoyz · 12-30-2006, 12:19 AM

Quote:

Originally Posted by BIGCHEVYMAN

lets see a few pics

If u don't have a way to post pics, email to me & i can post for you............

Thanks, Rick

Troy-Built · 12-30-2006, 12:22 AM

I can do it. I just have way too many irons in the fire to do it right now. I will do what I can to post them before Monday.

bad_turbo · 12-30-2006, 02:21 AM

must have a pretty big trailer if you got that monster on it! Too bad your not closer to california, I would trade you for my '67 burb

soleeagle · 12-30-2006, 09:29 PM

How much for the 4 speed and the np205?

Troy-Built · 12-30-2006, 11:27 PM

I have a 20 foot dovetail trailer and it filled it up. The tach set up is in good condition. I can hook up and see if it works. The rear bumper is junk. It's a shame because it's chrome. As far as the tranny and transfer case 300 obo

takes them.

bad_turbo · 12-30-2006, 11:41 PM

Quote:

Originally Posted by Troy-Built

The body is junk (you can throw a cat through it)but drivetrain is all intact. This is a single wheel not a dually. I bought this from the original owner. It has been sitting in the pasture for ten years but all of the tires were up but one. They parked it because the body was falling off of it (go figure). Obviously, it has a Dana 60 front with 4:11's with rear 14 bolt with positrac. It has a 350 (believe it or not it isn't stuck)4 speed with a 205 transfer case. There are quite a few options on the truck including air, tilt wheel, factory tach and rear slider. I would like 1500 out of the truck. It is already on my trailer ready for delivery. lol I bought this as package deal with a 69 3/4 4x4 Chevy. I can add picture if needed.
Thanks Troy

would like to see pics of both!

Troy-Built · 12-30-2006, 11:47 PM

I am planning on posting pictures of all of my toys and projects shortly.

Troy-Built · 01-01-2007, 05:41 PM

Here are some pictures of both.

Russell · 01-02-2007, 02:36 AM

Couple of things I'm interested in from that truck, and would love better pics of:

1) Dash bezel
2) Brushed Aluminum strip on the dash pad
3) Pull strap covers on both front doors
4) Speedo cable

I'd love the steering column (standard tilts are pretty uncommon around here) and some of the trim from the body, but shipping bigger / longer stuff like that up here would be simply killer...

Troy-Built · 01-02-2007, 10:32 AM

Here are some more pictures. As far as the interior goes it probably won't be worth messing with. The driver side front window has been broken for some time. Oddly enough, the interior isn't bad for it being open.

**ScottH** · 01-02-2007, 11:18 AM

Let me know what you want for the tach cluster, and if dash pad is in good condition that as well.

Thanks.

Russell · 01-02-2007, 12:18 PM

I see at least one pull-strap cover there that I'd love to have, and that dash bezel still looks pretty good to me as well! Much better than the bare, exposed guage pod I have now...

I see that your dash pad strip is lying on the floor similar to mine (gotta hate those stupid plastic studs & speed nuts...), and I just ordered a brand new speedo cable.

If you are up for selling me those two peices, just get me a shipped price to Alberta Canada, postal code T8E 2C8 and shoot me a PM

BTW, if it isn't too much trouble, one more pic of the whole dash bezel would be nice, thanks!

Troy-Built · 01-02-2007, 12:29 PM

Here are the last of the pictures. Thanks to me being in BFE, my internet connection sucks

It took me the better part of 2 days to upload these pictures and the ones on the 67-72 message board.

manimal · 01-02-2007, 02:09 PM

How much would you want for the whole truck? And ho wfar is Richmond, INDIANA from you?

Troy-Built · 01-03-2007, 08:43 AM

You are straight East of me on the other side of the state. I live just South of Interstate 74 4 miles from the Illinois line. I want to get 1500 out of the whole truck. If not sold by the middle of the month I will start parting out. I would like to keep the motor if I part it out since it should be 4 bolt with a steel crank. I bought this off of the original owner and has I believe 106,000 on it. Other people on the board are interested in parts and I am definitely going to keep them in mind. I just don't have much free time. I work on the railroad full time and turn wrenches full time also.

toomanytoyz · 01-03-2007, 10:11 PM

If u do Part it out & end up with just Frame left i would be interested in that.

Thanks, Rick

soleeagle · 01-04-2007, 12:48 AM

Quote:

Originally Posted by Troy-Built

I have a 20 foot dovetail trailer and it filled it up. The tach set up is in good condition. I can hook up and see if it works. The rear bumper is junk. It's a shame because it's chrome. As far as the tranny and transfer case 300 obo

takes them.

Will you include the flywheel, clutch, pedal and linkage for this price? My step brother is interested in this and I need the pedal and linkage for my own project.

Troy-Built · 01-04-2007, 04:11 AM

Right now Maniamal is interested in the whole truck. If it don't work out I will ell you everything that has to do with the tranny for that price.

soleeagle · 01-04-2007, 01:34 PM

Sounds good

12-26-2006, 09:33 AM	#1
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	f/s 78 1ton 4x4 3+3 in Indiana The body is junk (you can throw a cat through it)but drivetrain is all intact. This is a single wheel not a dually. I bought this from the original owner. It has been sitting in the pasture for ten years but all of the tires were up but one. They parked it because the body was falling off of it (go figure). Obviously, it has a Dana 60 front with 4:11's with rear 14 bolt with positrac. It has a 350 (believe it or not it isn't stuck)4 speed with a 205 transfer case. There are quite a few options on the truck including air, tilt wheel, factory tach and rear slider. I would like 1500 out of the truck. It is already on my trailer ready for delivery. lol I bought this as package deal with a 69 3/4 4x4 Chevy. I can add picture if needed. Thanks Troy __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks Last edited by Troy-Built; 12-26-2006 at 09:36 AM.

12-29-2006, 05:30 AM	#2
JTK20 Active Member Join Date: Oct 2006 Location: In the north and VERY proud of it. Posts: 150	Re: f/s 78 1ton 4x4 3+3 in Indiana Dumb question, but what exactly does "3+3" mean? Does that mean it's a crew cab? Last edited by JTK20; 12-29-2006 at 05:30 AM.

12-29-2006, 10:25 AM	#3
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 777	Re: f/s 78 1ton 4x4 3+3 in Indiana yes

12-29-2006, 10:26 AM	#4
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana Yeah, it's a crew cab. If guys are just wanting certain parts let me know. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks

12-29-2006, 11:04 AM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: f/s 78 1ton 4x4 3+3 in Indiana Would be interested in the tach cluster and rear bumper if in good condition. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

12-29-2006, 03:52 PM	#6
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: f/s 78 1ton 4x4 3+3 in Indiana lets see a few pics

12-30-2006, 12:22 AM	#8
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana I can do it. I just have way too many irons in the fire to do it right now. I will do what I can to post them before Monday. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks

12-30-2006, 02:21 AM	#9
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: f/s 78 1ton 4x4 3+3 in Indiana must have a pretty big trailer if you got that monster on it! Too bad your not closer to california, I would trade you for my '67 burb __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting " Last edited by bad_turbo; 12-30-2006 at 02:30 AM.

12-30-2006, 09:29 PM	#10
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Re: f/s 78 1ton 4x4 3+3 in Indiana How much for the 4 speed and the np205? __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

12-30-2006, 11:27 PM	#11
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana I have a 20 foot dovetail trailer and it filled it up. The tach set up is in good condition. I can hook up and see if it works. The rear bumper is junk. It's a shame because it's chrome. As far as the tranny and transfer case 300 obo takes them. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks Last edited by Troy-Built; 12-30-2006 at 11:28 PM.

12-30-2006, 11:47 PM	#13
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana I am planning on posting pictures of all of my toys and projects shortly. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks

01-01-2007, 05:41 PM	#14
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana Here are some pictures of both. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks Last edited by Troy-Built; 05-15-2007 at 11:26 AM.

01-02-2007, 02:36 AM	#15
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: f/s 78 1ton 4x4 3+3 in Indiana Couple of things I'm interested in from that truck, and would love better pics of: 1) Dash bezel 2) Brushed Aluminum strip on the dash pad 3) Pull strap covers on both front doors 4) Speedo cable I'd love the steering column (standard tilts are pretty uncommon around here) and some of the trim from the body, but shipping bigger / longer stuff like that up here would be simply killer... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-02-2007, 10:32 AM	#16
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana Here are some more pictures. As far as the interior goes it probably won't be worth messing with. The driver side front window has been broken for some time. Oddly enough, the interior isn't bad for it being open. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks Last edited by Troy-Built; 05-15-2007 at 11:26 AM.

01-02-2007, 11:18 AM	#17
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: f/s 78 1ton 4x4 3+3 in Indiana Let me know what you want for the tach cluster, and if dash pad is in good condition that as well. Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon



Register or Log In To remove these advertisements.

01-02-2007, 12:18 PM	#18
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: f/s 78 1ton 4x4 3+3 in Indiana I see at least one pull-strap cover there that I'd love to have, and that dash bezel still looks pretty good to me as well! Much better than the bare, exposed guage pod I have now... I see that your dash pad strip is lying on the floor similar to mine (gotta hate those stupid plastic studs & speed nuts...), and I just ordered a brand new speedo cable. If you are up for selling me those two peices, just get me a shipped price to Alberta Canada, postal code T8E 2C8 and shoot me a PM BTW, if it isn't too much trouble, one more pic of the whole dash bezel would be nice, thanks! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 01-02-2007 at 12:20 PM.

01-02-2007, 12:29 PM	#19
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana Here are the last of the pictures. Thanks to me being in BFE, my internet connection sucks It took me the better part of 2 days to upload these pictures and the ones on the 67-72 message board. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks Last edited by Troy-Built; 05-15-2007 at 11:25 AM.

01-02-2007, 02:09 PM	#20
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: f/s 78 1ton 4x4 3+3 in Indiana How much would you want for the whole truck? And ho wfar is Richmond, INDIANA from you?

01-03-2007, 08:43 AM	#21
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana You are straight East of me on the other side of the state. I live just South of Interstate 74 4 miles from the Illinois line. I want to get 1500 out of the whole truck. If not sold by the middle of the month I will start parting out. I would like to keep the motor if I part it out since it should be 4 bolt with a steel crank. I bought this off of the original owner and has I believe 106,000 on it. Other people on the board are interested in parts and I am definitely going to keep them in mind. I just don't have much free time. I work on the railroad full time and turn wrenches full time also. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks

01-03-2007, 10:11 PM	#22
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: f/s 78 1ton 4x4 3+3 in Indiana If u do Part it out & end up with just Frame left i would be interested in that. Thanks, Rick

01-04-2007, 04:11 AM	#24
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: f/s 78 1ton 4x4 3+3 in Indiana Right now Maniamal is interested in the whole truck. If it don't work out I will ell you everything that has to do with the tranny for that price. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks

01-04-2007, 01:34 PM	#25
soleeagle Registered User Join Date: Sep 2003 Location: Shelbyville, Indiana Posts: 614	Re: f/s 78 1ton 4x4 3+3 in Indiana Sounds good __________________ Chuck '85 Chevy Silverado 4X4 '91 Chevy 4X4 Suburban http://www.cardomain.com/memberpage/545941

Register or Log In To remove these advertisements.