2nd batch Michigan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davesamnesia · 12-28-2006, 09:47 AM

1. 4x4 trans linkage...15.00 SOLD
2. hood latches..10.00 ea
3. set of 4x4 front spring perches one rear..50.00
4. hood hinges..15.00
5. non a/c in cab heater box with controls...35.00
Please respond in this thread. Prices DO NOT include shipping.
Also have 67/68 hood in good shape will get pics if anyone is interested, but cannot ship this. 35.00 for pick-up only. SALE PENDING
Thanks, Dave

*67BABYBLUE* · 12-28-2006, 10:29 AM

I am interested in the hood. Please send pics. My email is c1ifforddog@yahoo.com Thanks

*67BABYBLUE* · 12-28-2006, 04:22 PM

I'll take the 67' hood for $35. Thanks

**uncle** · 12-28-2006, 04:25 PM

I'll take the linkage and do you have the other piece that goes on the frame.

davesamnesia · 12-28-2006, 04:49 PM

Uncle, thought I had other piece, but can't seem to find it. PM sent
Dave

*72lb4x4* · 12-28-2006, 10:59 PM

Want to sell just the shackles in the center of pic #3? Can you tell me the length from the centers of the bolts?

4bynut · 12-28-2006, 11:37 PM

Quote:

Originally Posted by uncle

I'll take the linkage and do you have the other piece that goes on the frame.

I think, i have the piece that goes on the frame to complete that linkage. If you need it, let me know. I can look tomorrow for you. Jason

brak · 12-29-2006, 01:40 AM

Are the hood hinges tight? mine are really sloppy and don't close correctly.

also, would you be willing to sell the heater control (cables not necessary) seperately?

davesamnesia · 12-29-2006, 08:47 AM

72lb4x4 Don't really want to split up the perches. Some-one is gonna need them for a conversion. Not sure of length they came from 71 1/2 ton. The springs measure about 44 inches in the static condition (not attached to anything)
4bynut that would be cool. Looked this morning and pretty sure I don't have it.
brak Would really like to sell the whole unit.The hinges worked fine when removed. How about hinges, and controls 50.00 to your door.
Dave

*72lb4x4* · 12-29-2006, 03:44 PM

No problem. I was trying to get the length of the shackle (not the spring) center to center. Mine are oversize and I don't know what stock is.

davesamnesia · 12-29-2006, 04:25 PM

72lb4x4 sorry, misunderstood what you needed. Shackles measure 4 1/8 inch center to center. Hope that helps.
Dave

1969k10stepside · 12-29-2006, 04:28 PM

Didnt see any in the pics but do you have any np205 shifter knobs?

davesamnesia · 12-29-2006, 04:56 PM

Have a knob, chrome lever and transfer case. Gonna keep them all together though.
Dave

4bynut · 12-29-2006, 09:22 PM

I found the bracket for the auto linkage if your interested. I can post a pic if needed. Thanks Jason

67arch · 12-29-2006, 10:14 PM

I would be interested in heater box w/ controls and cables. Thanks

davesamnesia · 12-30-2006, 07:52 AM

67 arch...shoot me PM let me know.
4bynut... Thanks, maybe PM uncle and see if he wants it.
Dave

12-28-2006, 09:47 AM	#1
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	2nd batch Michigan 1. 4x4 trans linkage...15.00 SOLD 2. hood latches..10.00 ea 3. set of 4x4 front spring perches one rear..50.00 4. hood hinges..15.00 5. non a/c in cab heater box with controls...35.00 Please respond in this thread. Prices DO NOT include shipping. Also have 67/68 hood in good shape will get pics if anyone is interested, but cannot ship this. 35.00 for pick-up only. SALE PENDING Thanks, Dave Attached Images __________________ 70 K5 350/350 Air Dave Last edited by davesamnesia; 12-29-2006 at 12:34 PM.

12-28-2006, 10:29 AM	#2
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: 2nd batch Michigan I am interested in the hood. Please send pics. My email is c1ifforddog@yahoo.com Thanks

12-28-2006, 04:25 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: 2nd batch Michigan I'll take the linkage and do you have the other piece that goes on the frame.

12-28-2006, 04:49 PM	#5
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: 2nd batch Michigan Uncle, thought I had other piece, but can't seem to find it. PM sent Dave __________________ 70 K5 350/350 Air Dave

12-28-2006, 10:59 PM	#6
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: 2nd batch Michigan Want to sell just the shackles in the center of pic #3? Can you tell me the length from the centers of the bolts? Last edited by 72lb4x4; 12-28-2006 at 11:24 PM.

12-28-2006, 04:22 PM	#3
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: 2nd batch Michigan I'll take the 67' hood for $35. Thanks

12-29-2006, 01:40 AM	#8
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: 2nd batch Michigan Are the hood hinges tight? mine are really sloppy and don't close correctly. also, would you be willing to sell the heater control (cables not necessary) seperately? __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

12-29-2006, 08:47 AM	#9
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: 2nd batch Michigan 72lb4x4 Don't really want to split up the perches. Some-one is gonna need them for a conversion. Not sure of length they came from 71 1/2 ton. The springs measure about 44 inches in the static condition (not attached to anything) 4bynut that would be cool. Looked this morning and pretty sure I don't have it. brak Would really like to sell the whole unit.The hinges worked fine when removed. How about hinges, and controls 50.00 to your door. Dave __________________ 70 K5 350/350 Air Dave

12-29-2006, 03:44 PM	#10
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: 2nd batch Michigan No problem. I was trying to get the length of the shackle (not the spring) center to center. Mine are oversize and I don't know what stock is.

12-29-2006, 04:25 PM	#11
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: 2nd batch Michigan 72lb4x4 sorry, misunderstood what you needed. Shackles measure 4 1/8 inch center to center. Hope that helps. Dave __________________ 70 K5 350/350 Air Dave

12-29-2006, 04:28 PM	#12
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: 2nd batch Michigan Didnt see any in the pics but do you have any np205 shifter knobs?

12-29-2006, 04:56 PM	#13
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: 2nd batch Michigan Have a knob, chrome lever and transfer case. Gonna keep them all together though. Dave __________________ 70 K5 350/350 Air Dave

12-29-2006, 09:22 PM	#14
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: 2nd batch Michigan I found the bracket for the auto linkage if your interested. I can post a pic if needed. Thanks Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)

12-29-2006, 10:14 PM	#15
67arch WTB:Patience and Talent Join Date: Sep 2006 Location: Oklahoma Posts: 119	Re: 2nd batch Michigan I would be interested in heater box w/ controls and cables. Thanks __________________ 69 shortwide

12-30-2006, 07:52 AM	#16
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: 2nd batch Michigan 67 arch...shoot me PM let me know. 4bynut... Thanks, maybe PM uncle and see if he wants it. Dave __________________ 70 K5 350/350 Air Dave



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.