Replacement parts for 67-72 Burbs.

[Dano69c10]

I'm new to burbs, so I hope I don't get flamed.
Does anyone sell
1) repop rear tailgates for 67-72 burbs?
2) rear quarter panel patch panels?
3) rocker panels for the third door entry?
4) repop 3rd door shells or skins?
Thanx in advance
Dano

[Hart_Rod]

Dan,

No repop tailgates (which one do you need upper or lower?). Everything else you can can get through GoodMarkindustries. Here's their site:

http://goodmarkindustries.com/GMCKTruck6772.html

[stsalvage]

Hay Dan i'm in Moreno Valley Calif you can go to Brothers in corona calif 1-800-977-2767 or the Truck shop in Orange calif Phone#1-800-243-8947

the web address for bothers is www.botherstrucks.com

the web address for the truckshop www.truckandcarshop.com

the truck shop in my book is a better place to buy your parts resones your also do 1967--80 camaros 1964--1972 chevelles and elcominos 1946--1959 mid size cars like impala biscain belair all in the same wherehouse building and you can see the parts and touch and see if the part will work for your appaction thetruckandcarshop hasd the best prices and a lot of used parts that are sold there that they have in show cases like hard to find eletric parts and the truck side is devoted to 1940--1990 trucks so there the best i got 3 suburbans 1# 1967 1# 1968 gmc and a 1969 Gmc the rear hach door is the problem most of us are having a problem with so far i found out it may cost me $1000-$1500 to have the upper porion of my clam door redone cus its so cancered up but i feel thats cheep cus the guy has to make everything from scrach so if you can find a doner door you can make 2 doors into one if any of the repoper guys make this door it will cost 1000 to 1500 anyways the 3rd door is the problem they dont make that door eather so better off finding a doner 1967--1972 suburban if you can find the GMC or the chevy from from 1969 and up cus in 1967 the frame dose not have the dimple for the power streeing box even thow you can get the brackets to make the 1964--1967 frames to expected the box but i like the dimple in the frame and in 1971--72 you had the 5 bolt front end and rear end i've been told the 1969gmc has disc brakes on the suburbans and even some had disc brakes on the truck but hope the info can help you out sam from Riverside Calif

[Hart_Rod]

Originally Posted by stsalvage

Hay Dan i'm in Moreno Valley Calif you can go to Brothers in corona calif 1-800-977-2767 or the Truck shop in Orange calif Phone#1-800-243-8947

the web address for bothers is www.botherstrucks.com

the web address for the truckshop www.truckandcarshop.com

the truck shop in my book is a better place to buy your parts resones your also do 1967--80 camaros 1964--1972 chevelles and elcominos 1946--1959 mid size cars like impala biscain belair all in the same wherehouse building and you can see the parts and touch and see if the part will work for your appaction thetruckandcarshop hasd the best prices and a lot of used parts that are sold there that they have in show cases like hard to find eletric parts and the truck side is devoted to 1940--1990 trucks so there the best i got 3 suburbans 1# 1967 1# 1968 gmc and a 1969 Gmc the rear hach door is the problem most of us are having a problem with so far i found out it may cost me $1000-$1500 to have the upper porion of my clam door redone cus its so cancered up but i feel thats cheep cus the guy has to make everything from scrach so if you can find a doner door you can make 2 doors into one if any of the repoper guys make this door it will cost 1000 to 1500 anyways the 3rd door is the problem they dont make that door eather so better off finding a doner 1967--1972 suburban if you can find the GMC or the chevy from from 1969 and up cus in 1967 the frame dose not have the dimple for the power streeing box even thow you can get the brackets to make the 1964--1967 frames to expected the box but i like the dimple in the frame and in 1971--72 you had the 5 bolt front end and rear end i've been told the 1969gmc has disc brakes on the suburbans and even some had disc brakes on the truck but hope the info can help you out sam from Riverside Calif

tsalvage - is yours worse than this?

[Dano69c10]

Thanx stsalvage!
Well 2 out of 4 ain't bad I guess!

My prob is the lower gate, but I really haven't looked too closely at the upper clam door.
If all else fails I will take the gates apart and repair from there. Also my third door will need repair.
The more parts I can find the better, since that will cut down on the resto time.
Too bad someone doesn't even make a fiberglass upper clam door.
Dano

[Hart_Rod]

Originally Posted by Dano69c10

Thanx stsalvage!
Well 2 out of 4 ain't bad I guess!

My prob is the lower gate, but I really haven't looked too closely at the upper clam door.
If all else fails I will take the gates apart and repair from there. Also my third door will need repair.
The more parts I can find the better, since that will cut down on the resto time.
Too bad someone doesn't even make a fiberglass upper clam door.
Dano

Dano,

I've got a nice rust free lower tailgate that I would be willing to sell. PM me if you are interested.

Rob

[stsalvage]

my bad www.brotherstrucks.com

[Dano69c10]

Well this was for a burb I was bidding for on ebay. I got outbid, so I guess I'm back on the hunt for a burb. Thanx to everyone for their help.
Dano
Hey stsalvage selling any of your burbs?

[oneway]

Dano, Obsolete Chevrolet, gmcpauls.com, are two sites that I have found alot of parts. I am redoing a 70 panel. They have alot of parts for burbs.

[oneway]

Dano, Go to oldride.com There are several for sale. 3/4, and 1/2 ton.

[Dano69c10]

Thanx "oneway" I'll check it out. I was feelin a bit low after losing that burb on e-bay.