parts to make a 4 speed tilt from auto - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 01-10-2007, 03:25 PM

the upper tin piece is exact but the lower bell doesn't have the same taper as a 71-72 tilt. this column was in a 68 pickup so i'm not sure what it came out of. i cut it off just below the bell since the lower portion was not correct for a truck. i have all inside pieces that were above my cut line and they are same as a truck tilt. $45.00 shipped.
could be used to convert an automatic van tilt to a 4 speed tilt for a truck which is what i planned to do but i sold all my van tilts and pieces.

**jerry moss** · 01-13-2007, 02:12 PM

ttt

msgross · 01-17-2007, 09:17 PM

jerry, got my van tilt today...

what's the best price shipped to 17042?

also, I used my USPS flatrate box today and they will pick up from your front porch for free! paid the 8.10 on the internet, taped the label to the box and ordered a pickup all online. Beats driving to the post office at lunch!

**jerry moss** · 01-18-2007, 12:32 AM

I'll go $40.00 shipped.

msgross · 01-18-2007, 07:49 AM

no dents and this is all I need? if so then PM me your info...thanks

01-10-2007, 03:25 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,873	parts to make a 4 speed tilt from auto the upper tin piece is exact but the lower bell doesn't have the same taper as a 71-72 tilt. this column was in a 68 pickup so i'm not sure what it came out of. i cut it off just below the bell since the lower portion was not correct for a truck. i have all inside pieces that were above my cut line and they are same as a truck tilt. $45.00 shipped. could be used to convert an automatic van tilt to a 4 speed tilt for a truck which is what i planned to do but i sold all my van tilts and pieces. Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 01-13-2007 at 02:12 PM.

01-13-2007, 02:12 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,873	Re: parts to make a 4 speed tilt from auto ttt __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-17-2007, 09:17 PM	#3
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: parts to make a 4 speed tilt from auto jerry, got my van tilt today... what's the best price shipped to 17042? also, I used my USPS flatrate box today and they will pick up from your front porch for free! paid the 8.10 on the internet, taped the label to the box and ordered a pickup all online. Beats driving to the post office at lunch! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-18-2007, 12:32 AM	#4
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,873	Re: parts to make a 4 speed tilt from auto I'll go $40.00 shipped. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-18-2007, 07:49 AM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: parts to make a 4 speed tilt from auto no dents and this is all I need? if so then PM me your info...thanks __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.