Got my tach done today!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

centsless · 01-15-2007, 08:21 PM

Here is a pic of my tach/vac dash. I got it all done and in the truck today! I took the needle off of the Camaro tach and replaced it with a speedo needle from another truck dash. What do you all think??
Attachment 237408

Attachment 237409

Attachment 237410

jsbgump · 01-15-2007, 08:23 PM

Looks good

ghackett1 · 01-15-2007, 08:32 PM

Neat idea using a camaro tach. Looks good!

lytemup454 · 01-15-2007, 08:37 PM

looks cool, i like that you can look down and it's right there instead of having to look around the wheel

Southedisto · 01-15-2007, 09:04 PM

Nice, those tachs look almost as good as the originals.

Sport/Truck · 01-15-2007, 09:25 PM

Very nice. Was it hard wire up? Was the factory wiring already there?
What year Camaro do you get the tachs?
s/t

centsless · 01-15-2007, 09:46 PM

The wiring was easy. I ran one wire to an IGN hot fuse, one to ground, and one to the HEI. It was harder figuring out how to mount it. I drilled a hole in the rear tin and it is mounted there. It is a tach out of a 73-81 Camaro.

s95930 · 01-15-2007, 09:47 PM

I am looking for a tach to do the samething.

cgoodwin · 01-15-2007, 09:57 PM

That looks really good.

Any install pics?

Where did you pick up the tach?

skokie · 01-15-2007, 10:09 PM

Very Nice!!!!

centsless · 01-15-2007, 11:46 PM

I did some parts trading to get the tach dash from a guy locally. I did not do any pics while I built it, I worked on it a few minutes at a time over the last month or so.

68shortstep · 01-15-2007, 11:57 PM

I really like the truck speedo-needle idea. Cool; makes it blend-in better.

To buy a similar tach: Look on Evilbay under "camaro tach dash." They seem to be on there almost all the time. Seem to sell for about $ 20 - 30 or less usually, as a complete dash unit.

Got mine bought about a week or so ago, also with a supposedly functioning clock which will go in the lower gauge row. Came via the big brown truck just yesterday.

Haven't yet unpacked it. Some work ahead for me, too ............

truckminded · 01-16-2007, 04:50 AM

It does look sharp, the needle switch was a nice touch.

Bishops Trucks · 01-16-2007, 05:07 AM

I really like that mod. Fits the style great.

67chevemall · 01-16-2007, 08:36 AM

good job, nice needle idea.

How is the 95 Impala SS treating you? (my favorite car)

sleepyboy · 01-16-2007, 08:44 AM

looks like it belongs there

hvychve · 01-16-2007, 01:49 PM

fits like it belongs.... looks pretty good ,,, and deffinately cheaper than buying aftermarket new..3 hun or so....

**WorkinLonghorn** · 01-16-2007, 04:26 PM

That looks real sharp,let's hope it is somewhat accurate (like my original isn't anymore). I may just go with one of those Korean replacements for $96.00.

70c10 · 01-16-2007, 05:35 PM

Nice job Bob!. There was an article awhile back in FAQ on installing a Camaro tach for those interested. I have done a few myself.

msgross · 01-16-2007, 05:46 PM

looks good...let me know if you run accross another vac gauge. I'm holding out until I strike gold in the junkyard...

centsless · 01-16-2007, 07:25 PM

Thanks everyone! 67chevemall, The SS RULES !! I have had a lot of cars, and the 95 SS is one of my favorites! The look on the kids faces is great when you dust their ricer with a four door!!! Mine was a total loss car and I rebuilt it. And Mike, Your Colts ripped my Ravens a new one Saturday....

msgross · 01-16-2007, 08:21 PM

Quote:

Originally Posted by centsless

And Mike, Your Colts ripped my Ravens a new one Saturday....

sure did...those damn Pats are always in our way though....makes for good rivalry...

67chevemall · 01-17-2007, 09:26 AM

Da Bears! lol

724x4a/cchevy · 01-18-2007, 12:43 AM

Looks even better with white overlays

I painted the bulbs with green stained glass spray paint and the gauges glow green at night. Very COOL! and pretty cheap too. I got them from durangedesigns.com for 20 bucks the camaro tach overlay was an extra couple bucks I really like your idea of using the speedo needle too, wish i had thought about that when i built my cluster. if i ever have problems with it, im definately going to swap it out. Durangedsigns also includes an overlay for the a/c controls. That i know of they dont have a heater overlay though.

see ten · 01-18-2007, 01:02 PM

I painted all my needles at the same time, I think they match pretty good and most guys never notice that the tach isn't stock. And just a tip, the 70-77? tachs are somewhat easier to mount due to the circuit board being smaller and not being secured to the tach itself. The face looks just the same but the needles are different.

01-15-2007, 08:21 PM	#1
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Got my tach done today!! Here is a pic of my tach/vac dash. I got it all done and in the truck today! I took the needle off of the Camaro tach and replaced it with a speedo needle from another truck dash. What do you all think?? Attachment 237408 Attachment 237409 Attachment 237410 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:46 PM.

01-15-2007, 08:23 PM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Got my tach done today!! Looks good __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

01-15-2007, 08:32 PM	#3
ghackett1 68 C10 Longbed Join Date: Sep 2006 Location: Naples, Florida Posts: 520	Re: Got my tach done today!! Neat idea using a camaro tach. Looks good!

01-15-2007, 08:37 PM	#4
lytemup454 Registered User Join Date: Dec 2006 Location: Pueblo West Posts: 264	Re: Got my tach done today!! looks cool, i like that you can look down and it's right there instead of having to look around the wheel

01-15-2007, 09:04 PM	#5
Southedisto River life...... Join Date: Oct 2005 Location: Orangeburg SC Posts: 1,078	Re: Got my tach done today!! Nice, those tachs look almost as good as the originals. __________________ I like wheelin in Dixie!

01-15-2007, 09:25 PM	#6
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Got my tach done today!! Very nice. Was it hard wire up? Was the factory wiring already there? What year Camaro do you get the tachs? s/t __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

01-15-2007, 09:46 PM	#7
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Got my tach done today!! The wiring was easy. I ran one wire to an IGN hot fuse, one to ground, and one to the HEI. It was harder figuring out how to mount it. I drilled a hole in the rear tin and it is mounted there. It is a tach out of a 73-81 Camaro. __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 01-15-2007 at 09:46 PM.

01-15-2007, 09:47 PM	#8
s95930 A-Adam A-Adam Join Date: Apr 2003 Location: Sarpy Co. Ne. South of Omaha Posts: 263	Re: Got my tach done today!! I am looking for a tach to do the samething. __________________ 70 3/4 ton GMC Camper Special

01-15-2007, 09:57 PM	#9
cgoodwin Registered User Join Date: Dec 2006 Location: winter haven, fl Posts: 56	Re: Got my tach done today!! That looks really good. Any install pics? Where did you pick up the tach?

01-15-2007, 10:09 PM	#10
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Re: Got my tach done today!! Very Nice!!!! __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-15-2007, 11:46 PM	#11
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Got my tach done today!! I did some parts trading to get the tach dash from a guy locally. I did not do any pics while I built it, I worked on it a few minutes at a time over the last month or so. __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

01-15-2007, 11:57 PM	#12
68shortstep Looks good at 20-ft ..... Join Date: Apr 2005 Location: Mtn Home, AR Posts: 707	Re: Got my tach done today!! I really like the truck speedo-needle idea. Cool; makes it blend-in better. To buy a similar tach: Look on Evilbay under "camaro tach dash." They seem to be on there almost all the time. Seem to sell for about $ 20 - 30 or less usually, as a complete dash unit. Got mine bought about a week or so ago, also with a supposedly functioning clock which will go in the lower gauge row. Came via the big brown truck just yesterday. Haven't yet unpacked it. Some work ahead for me, too ............

01-16-2007, 04:50 AM	#13
truckminded Junior Member Join Date: Dec 2006 Location: sacramento Posts: 54	Re: Got my tach done today!! It does look sharp, the needle switch was a nice touch.

01-16-2007, 05:07 AM	#14
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: Got my tach done today!! I really like that mod. Fits the style great. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

01-16-2007, 08:36 AM	#15
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Got my tach done today!! good job, nice needle idea. How is the 95 Impala SS treating you? (my favorite car) __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD



Register or Log In To remove these advertisements.

01-16-2007, 08:44 AM	#16
sleepyboy '69 Step Join Date: Mar 2005 Location: Marion, Texas Posts: 722	Re: Got my tach done today!! looks like it belongs there

01-16-2007, 01:49 PM	#17
hvychve To The Levy Join Date: Jan 2007 Location: california Posts: 391	Re: Got my tach done today!! fits like it belongs.... looks pretty good ,,, and deffinately cheaper than buying aftermarket new..3 hun or so....

01-16-2007, 04:26 PM	#18
WorkinLonghorn Senior Member Join Date: Dec 2006 Location: Studio City, Calif. Posts: 2,861	Re: Got my tach done today!! That looks real sharp,let's hope it is somewhat accurate (like my original isn't anymore). I may just go with one of those Korean replacements for $96.00. __________________ '69 GMC C2500 Custom Camper, 8 1/2' bed, New GM 350, NP 435 Close Ratio 4spd. Trans., 3.73 Dana-60 open.Camper and Trailer wiring, PS, PB, AC, tach , three gas tanks, 2nd owner, Work-Truck supreme. Best $300 I ever spent.

01-16-2007, 05:35 PM	#19
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Got my tach done today!! Nice job Bob!. There was an article awhile back in FAQ on installing a Camaro tach for those interested. I have done a few myself. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

01-16-2007, 05:46 PM	#20
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Got my tach done today!! looks good...let me know if you run accross another vac gauge. I'm holding out until I strike gold in the junkyard... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-16-2007, 07:25 PM	#21
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Got my tach done today!! Thanks everyone! 67chevemall, The SS RULES !! I have had a lot of cars, and the 95 SS is one of my favorites! The look on the kids faces is great when you dust their ricer with a four door!!! Mine was a total loss car and I rebuilt it. And Mike, Your Colts ripped my Ravens a new one Saturday.... __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

01-17-2007, 09:26 AM	#23
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Got my tach done today!! Da Bears! lol

01-18-2007, 12:43 AM	#24
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Got my tach done today!! Looks even better with white overlays I painted the bulbs with green stained glass spray paint and the gauges glow green at night. Very COOL! and pretty cheap too. I got them from durangedesigns.com for 20 bucks the camaro tach overlay was an extra couple bucks I really like your idea of using the speedo needle too, wish i had thought about that when i built my cluster. if i ever have problems with it, im definately going to swap it out. Durangedsigns also includes an overlay for the a/c controls. That i know of they dont have a heater overlay though. Last edited by 724x4a/cchevy; 01-18-2007 at 12:48 AM.

01-18-2007, 01:02 PM	#25
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Got my tach done today!! I painted all my needles at the same time, I think they match pretty good and most guys never notice that the tach isn't stock. And just a tip, the 70-77? tachs are somewhat easier to mount due to the circuit board being smaller and not being secured to the tach itself. The face looks just the same but the needles are different.

Register or Log In To remove these advertisements.