Blazer parts for sale

[68350]

I have the following parts for sale. If you want a picture, let me know, or if there's something you're looking for, let me know.

Windshield frame-$275
Rear hatch(NO CRACKS or glass)-$300
Black blazer visors-$100
Rear seat hold downs-$75
Hatch struts-$50
Rear hatch handle with rods-$125

there's some other stuff left, too. The tank is there, but the tank itself is bad, but has all the filler tube and stuff. Rear seat isn't too bad. All prices are negotiable, and all are plus shipping. thanks

[daves71k5]

68350;
I am very interested in the rear hatch but would like a few closeup pics of it, especially any possible problem areas. I already have a couple that need repair so if this one is really crack free and we can figure a good way to ship to Idaho I will take it.
Please P.M. me some pics and figure shipping to Idaho 83211.
thanks Dave (davemt36@hotmail.com)

[c-1072]

I am interested in the windshield frame Pics ,Is it cut yet ?Are you willing to ship?
Thanks

[68350]

I will be able to get pics of the hatch tonight possibly or tomorrow. The windshield frame is not cut, yet, but I will cut is out soon. And yes, I will ship.

[68350]

Here's a few of the hatch. I will get windshield pics this weekend as I have to remove the top yet. I am NEGOTIABLE on all these parts. thanks





I have the other hinge, it's just not on there. The hatch is nice other than some missing paint.

[daves71k5]

Looks good from what I've seen so far but would you take a few closeups of the areas around the latches and the inside along the bottom frame and corners where most of the cracking usually occurs. Not trying to be a pain in the a$$ but I just need to make sure before I commit financially.
Also does handle and latches\hardware come with the hatch? Don't need the glass but would like the rest.
thanks Dave

[68350]

I'll get a few more, but if the handle and struts, along with the hinges went, would you do $375 plus shipping? thanks

[daves71k5]

I actually already have all the hardware but found trying to take the handle and latch rods out of the hatches usually causes more damage to the hatch and the parts so trying to put my old handle and latch parts can be done but if they were included for the $300 I wouldn't argue.
thanks Dave

[68350]

Well, I discovered two cracks, one on each corner, but it looks like it would be easily fixed. That is the only thing I see wrong, I looked the bottom over. I will go 300 obo plus shipping for everything, but I forgot to mention that two of those covers are gone.

[daves71k5]

That sounds pretty fair, the cracks don't look terrible, at least all the fiberglass is there.
What are the pieces that look to be screwed on the inside corners, looks like a piece of strap or fiberglass? Can see what I am talking about on the first and fourth pics, also is that a crack under that one in the fourth pic or just a chip in the paint?
Can you figure what shipping to Idaho 83211 might be. Last hatch I had shipped was with Greyhound maybe check with them as well as the other shippers.
Dave

[68350]

not a crack, just paint or something. Um, pieces are little pieces of velcro or something. I will check on shipping, reply in a few

[68350]

shipping through ups is around $100, a little less. I went over on all the measurements since it's not boxed. closest greyhound is 120 miles away. let me know

[tallhoedude]

put me in line on the windshield frame please,thanks

[68350]

K, I had you in line from your pm, too. thanks

[cstanley]

Would you happen to have any of the pass. seat hardware? I'm particularly interested in the release latch and associated mechanism. see my pic where it's all missing...

Originally Posted by 68350

I have the following parts for sale. If you want a picture, let me know, or if there's something you're looking for, let me know.

Windshield frame-$275
Rear hatch(NO CRACKS or glass)-$300
Black blazer visors-$100
Rear seat hold downs-$75
Hatch struts-$50
Rear hatch handle with rods-$125

there's some other stuff left, too. The tank is there, but the tank itself is bad, but has all the filler tube and stuff. Rear seat isn't too bad. All prices are negotiable, and all are plus shipping. thanks

[68350]

I'm sorry, either of my blazers I have had had the release lever and stuff. thanks

[daves71k5]

Still interested in the hatch, just trying to figure how to come up with needed funds. thanks Dave

[68350]

I removed the top today, and the frame looks good!! I will get picture possibly tomorrow when it's light out. thanks

[68350]

Here are pictures of the windshield frame, very nice condition.

[badpeanut]

I might be interested in the rear seat if you can get it to Bismarck?

What does it have for a rearend?

What is the story on the roll bar?

[68350]

the rear seat has been recovered at sometime, very nice condition, except for arm rests. It will be a little bit before I will be in bismarck, but make an offer on it, and I'll let you know.

the roll bar I'm not sure about, I think I am just gonna keep it for now.

the rearend is the reason I bought it, it is a factory positraction unit.

let me know on the seat. thanks

[badpeanut]

PM sent...

[PICKMUP]

Are the bucket seats & console for sale?

Maybe we could trade for some of those parts you were going to get back to me on in mid-DEC.

[68350]

Sorry, there wasn't any buckets in it when I got it.