Parting Out 96 4x4 Burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tallhoedude · 01-22-2007, 03:06 PM

I AM PARTING OUT THIS 1996 4X4 SUBURBAN.

PARTS NOT AVAIL INCLUDE:
ENGINE,TRANS,T/CASE,RADIATOR,WIRING HARNESS(COMPLETE)DASH CLUSTER,FUEL LINES,FUEL TANK,FRT AND REAR SEATS.

MAINLY SELLING FOR BODY PANELS,GLASS,DOORS,INTERIOR TRIM.ALL PANELS ARE DENT AND RUST FREE,GLASS ALL GOOD.
INTERESTED IN SOMETHING,OR ALL OF IT?PICK YOUR PARTS AND MAKE ME AN OFFER.ALL TRADES CONSIDERED.ESPECIALLY 67-72 PARTS,DANA 60'S BUT WILL CONSIDER ANYTHING.THANKS

454_72_4X4 · 01-23-2007, 02:28 AM

I'd be interested in a few interior parts and the things over the windows, (Vent visors?). The interior is light gray, correct?

I pirated your pics and circled in red the parts I need. Easier than trying to describe them.

The triangle that covers the mirror mounting bolts I need for the left side. The tweeter speaker cover I need for the right side.
I'll have to check about the door handle trim.
The Vent Visors just for the front doors.

Understandable if you don't want to seperate the individul pieces. LMK either way.

Wish you were closer...I could use the windshield too. Plannin a trip toward NE Missouri sometime...? LOL

tallhoedude · 01-23-2007, 08:39 AM

how about $50.00 plus shipping.?thats for both frt vent visors,the left mirror bolt cover,the right tweeter cover and whatever door handle trim you want from the frt doors.my only concern is the ventshades cracking as im taking them off.if they break make it $25.00.let me know,thanks

bagged91 · 01-23-2007, 07:59 PM

complete door panels front, rear & cargo??? I know you said you were keeping the wiring but are you planning on using the p/w harness?

Shame you aren't closer... I have a 72' D60 3.54 PowerLok rear sitting around...

tallhoedude · 01-24-2007, 08:46 AM

i will NOT be using p/w p/door or mirror harness.let me know how much of it you are needing(which parts)and ill see what i can get done.
as far as the door panels.$70.00 plus shipping for each frt panel(includes window and lock switches)$40.00 each plus shipping for cargo door panels.id probably just throw in the harness stuff you wanted.let me know if serious and ill start pulling them off to make sure of them in 1 piece.thanks

bagged91 · 01-24-2007, 07:30 PM

Sorry, I'lle pass... I can get the entire door locally for $55.00

drillingmachine · 01-26-2007, 03:44 AM

grille shipped to 77098

tallhoedude · 01-26-2007, 08:15 AM

i will find out shipping this weekend.thanks

obsesive23 · 01-26-2007, 10:02 AM

2nd on the grille if drillingmachine passes
Interested in If the front console is in good shape let me know
all shipped to 98271 Wa

454_72_4X4 · 01-26-2007, 03:16 PM

Quote:

Originally Posted by tallhoedude

how about $50.00 plus shipping.?thats for both frt vent visors,the left mirror bolt cover,the right tweeter cover and whatever door handle trim you want from the frt doors.my only concern is the ventshades cracking as im taking them off.if they break make it $25.00.let me know,thanks

Sorry for the slow reply.
I think I'm gonna have to pass for the time being. Now that I thin about it the ventshades will be a problem, (getting them off and keeping them in one piece during shipping). I'll be better off looking locally.
Thanks though.

PT'S 70 CST · 01-27-2007, 10:12 AM

Centercaps 16", map light for second row seating.shipped to 29006

Thanks PT

msgross · 01-27-2007, 10:20 AM

does it have to unerhood trouble light like my 96 silverado did? the one that allows you to go to the back of the truck and then rewind it? If so let me know... my mom can pick it up, she lives in summitville...

ItsNotABlazer · 01-27-2007, 11:52 AM

How much would you need for the overhead center console and if the other buyer does not buy the door handle surround(I have no idea what its called) how much for those. Also what all is different as far as the ones with the rear AC as compared to non rear AC equipped? I was thinking of converting my 96 Yukon over to rear a/c if it isnt too much work. And one last item I would like a price on is the tailights (with the circuit boards)....friend could use them on an 88 pretty badly and I might need the circuit boards haha

All items would be shipped to 75460.
Thanks!

neev_nav · 01-27-2007, 07:42 PM

How about both mirrors? I'm in Canada, postal code L3Y 4W1. Thanks.

brak · 01-28-2007, 02:23 AM

Can i get a pic of the center console?

would you ship it to 55438?

tallhoedude · 01-29-2007, 08:12 AM

sorry couldnt get on here this weekend,sold the whole truck sunday.thanks for the interest.sorry

WADE JAGODZINSKI · 02-22-2007, 04:41 PM

How Much For Pass Rear Door

I'm Tight Buy The Way
Thanks Wade J.

Bumpin Buddha · 02-26-2007, 04:57 AM

ygpm

brak · 02-27-2007, 07:23 AM

Quote:

Originally Posted by WADE JAGODZINSKI

How Much For Pass Rear Door...

according to post #16, he sold the whole vehicle.

tallhoedude · 02-27-2007, 12:12 PM

Sorry For No Reply Guys.yes I Sold The Whole Truck.thanks

01-23-2007, 02:28 AM	#2
454_72_4X4 Registered User Join Date: Apr 2004 Location: N.E. MO Posts: 1,749	Re: Parting Out 96 4x4 Burb I'd be interested in a few interior parts and the things over the windows, (Vent visors?). The interior is light gray, correct? I pirated your pics and circled in red the parts I need. Easier than trying to describe them. The triangle that covers the mirror mounting bolts I need for the left side. The tweeter speaker cover I need for the right side. I'll have to check about the door handle trim. The Vent Visors just for the front doors. Understandable if you don't want to seperate the individul pieces. LMK either way. Wish you were closer...I could use the windshield too. Plannin a trip toward NE Missouri sometime...? LOL __________________ 72 C20 4X4 454 4 speed 89 Trans Am (was) 305 TPI 700r4 93 C1500 2wd Extended cab 350 700r4 98 Sonoma (TPI outa the Trans Am) 03 Yamaha 660 Raptor 03/04 660 Raptor 07 700 Raptor 85 Honda Odyssey

01-23-2007, 08:39 AM	#3
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Parting Out 96 4x4 Burb how about $50.00 plus shipping.?thats for both frt vent visors,the left mirror bolt cover,the right tweeter cover and whatever door handle trim you want from the frt doors.my only concern is the ventshades cracking as im taking them off.if they break make it $25.00.let me know,thanks __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

01-23-2007, 07:59 PM	#4
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: Parting Out 96 4x4 Burb complete door panels front, rear & cargo??? I know you said you were keeping the wiring but are you planning on using the p/w harness? Shame you aren't closer... I have a 72' D60 3.54 PowerLok rear sitting around... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-24-2007, 08:46 AM	#5
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Parting Out 96 4x4 Burb i will NOT be using p/w p/door or mirror harness.let me know how much of it you are needing(which parts)and ill see what i can get done. as far as the door panels.$70.00 plus shipping for each frt panel(includes window and lock switches)$40.00 each plus shipping for cargo door panels.id probably just throw in the harness stuff you wanted.let me know if serious and ill start pulling them off to make sure of them in 1 piece.thanks __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

01-24-2007, 07:30 PM	#6
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: Parting Out 96 4x4 Burb Sorry, I'lle pass... I can get the entire door locally for $55.00 __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

01-22-2007, 03:06 PM	#1
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Parting Out 96 4x4 Burb I AM PARTING OUT THIS 1996 4X4 SUBURBAN. PARTS NOT AVAIL INCLUDE: ENGINE,TRANS,T/CASE,RADIATOR,WIRING HARNESS(COMPLETE)DASH CLUSTER,FUEL LINES,FUEL TANK,FRT AND REAR SEATS. MAINLY SELLING FOR BODY PANELS,GLASS,DOORS,INTERIOR TRIM.ALL PANELS ARE DENT AND RUST FREE,GLASS ALL GOOD. INTERESTED IN SOMETHING,OR ALL OF IT?PICK YOUR PARTS AND MAKE ME AN OFFER.ALL TRADES CONSIDERED.ESPECIALLY 67-72 PARTS,DANA 60'S BUT WILL CONSIDER ANYTHING.THANKS __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

01-26-2007, 03:44 AM	#7
drillingmachine Married to my Truck Join Date: Apr 2006 Location: Houston, TX Posts: 72	Re: Parting Out 96 4x4 Burb grille shipped to 77098 __________________ 1982 Chevy SWB C-10 (AKA my pride and joy 1989 Chevy Suburban (under construction) 1989 Honda Civic sedan (work car)

01-26-2007, 08:15 AM	#8
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Parting Out 96 4x4 Burb i will find out shipping this weekend.thanks __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

01-26-2007, 10:02 AM	#9
obsesive23 Who me? Join Date: Jun 2004 Location: Bothell WA Posts: 640	Re: Parting Out 96 4x4 Burb 2nd on the grille if drillingmachine passes Interested in If the front console is in good shape let me know all shipped to 98271 Wa __________________ Living the dream 72 2WD Blazer, under going porter built surgery 67 GT Mustang fastback 67 Mustang coupe C/S clone 64 Falcon sprint hardtop Last edited by obsesive23; 01-26-2007 at 10:04 AM.

01-27-2007, 10:12 AM	#11
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Parting Out 96 4x4 Burb Centercaps 16", map light for second row seating.shipped to 29006 Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-27-2007, 10:20 AM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Parting Out 96 4x4 Burb does it have to unerhood trouble light like my 96 silverado did? the one that allows you to go to the back of the truck and then rewind it? If so let me know... my mom can pick it up, she lives in summitville... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-27-2007, 11:52 AM	#13
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Re: Parting Out 96 4x4 Burb How much would you need for the overhead center console and if the other buyer does not buy the door handle surround(I have no idea what its called) how much for those. Also what all is different as far as the ones with the rear AC as compared to non rear AC equipped? I was thinking of converting my 96 Yukon over to rear a/c if it isnt too much work. And one last item I would like a price on is the tailights (with the circuit boards)....friend could use them on an 88 pretty badly and I might need the circuit boards haha All items would be shipped to 75460. Thanks! __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

01-27-2007, 07:42 PM	#14
neev_nav Flying Dutchman Join Date: Mar 2006 Location: Stouffville Posts: 220	Re: Parting Out 96 4x4 Burb How about both mirrors? I'm in Canada, postal code L3Y 4W1. Thanks. __________________ 94 Chevy Ext. Cab 4x4 350 (My baby) "Women carpool. Men convoy."

01-28-2007, 02:23 AM	#15
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Parting Out 96 4x4 Burb Can i get a pic of the center console? would you ship it to 55438? __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

01-29-2007, 08:12 AM	#16
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Parting Out 96 4x4 Burb sorry couldnt get on here this weekend,sold the whole truck sunday.thanks for the interest.sorry __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"



Register or Log In To remove these advertisements.

02-22-2007, 04:41 PM	#17
WADE JAGODZINSKI Registered User Join Date: Oct 2000 Location: HOWARD LAKE MN.US. Posts: 42	Re: Parting Out 96 4x4 Burb How Much For Pass Rear Door I'm Tight Buy The Way Thanks Wade J. __________________ 67 STEP SIDE POWERED BY VORTEC 350 THRU A 700R4

02-26-2007, 04:57 AM	#18
Bumpin Buddha Registered User Join Date: Feb 2007 Location: NE Kan. Posts: 8	Re: Parting Out 96 4x4 Burb ygpm

02-27-2007, 12:12 PM	#20
tallhoedude ROCKWELL 5 TON CLUB !! Join Date: Oct 2006 Location: indiana Posts: 516	Re: Parting Out 96 4x4 Burb Sorry For No Reply Guys.yes I Sold The Whole Truck.thanks __________________ 1970 K5 "ON THE ROCKS" PROJECT:500hp 6.0 fuel injected. 2wd sm465 trans,t136 2.5 ton transfercase,5ton rockwells with 9.34 gears,custom wheel disc brakes,full hydro steering20+" OF LIFT AND 67/35/25's..67" tall TRACTOR TIRES.."THE MUD SLUT!!" MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=221935 1997 TAHOE,SAS D60 14B,5:13 DISC BRAKES,CROSSOVER STEER,HYDRO ASSIST,42 IROKS HINT:NEW NAME "K5ontheROCKS!"

Register or Log In To remove these advertisements.