TraderJon - The 1947 - Present Chevrolet & GMC Truck Message Board Network

corn · 01-24-2007, 07:18 PM

pics for you. Let me know if you need more info...

TraderJon · 01-24-2007, 07:59 PM

Thanks Corn
You have a lot more clearance than mine.
I'd be lucky to clear a fire ant with these,I guess thats what i get for bragging on the fit before i took down off the jack stands ?
I put some temporary flex pipe on it to hear the motor for break-in,it's eat 2 starters already & aint left the garage,gonna order a mini torque when i hit the lotto,on a positive note,,the cam sounds good,will try to get a video/audio clip for you when it quits raining,we've had 2" since yesterday & my yard is hub deep to a ferris wheel,may be tomorrow.
thanks
Jon

corn · 01-24-2007, 08:05 PM

Wow! Those do hang pretty low. Will they fit a 4X4? They forgot to tell us there are a few snags along the way, didnt they? Good luck with your project.

TraderJon · 01-24-2007, 08:33 PM

Iirc , the part # says 68to72 c10 1/2 ton bbc 2wd,guess i shoulda got some more info from the board before i bought em ?
I know my truck is lowered ,but i dont think there would be a lot of clearance in a stock ride height truck?
They wont make it around here on these fine roads,potholes the size of propane tanks ,our local road building crew cant spell pavement !
Thanks
Jon

84_4x4 · 01-24-2007, 08:36 PM

took me a while to see what you were taking a picture off but those headers look nice

TraderJon · 01-24-2007, 08:43 PM

There pretty,but i'm not going to be able to run them unless i bag the truck?
Was shopping around for the chevelle shorty header part # for our trucks?
Thanks
Jon

*rage'nrat638* · 01-24-2007, 08:51 PM

wow john .. if those are from summit i would be sending them back..
thats there deal 100 % happy..i know those hookers were not cheap.

let us know how this plays out.. mark

TraderJon · 01-24-2007, 09:41 PM

Mark,,I bought these at my local Autozone ,,same price as Summit,,gonna call tomorrow & see if i can return them? They may give me a hassle ?
Digging around Summit now looking at the hedman chevelle shorty's,,,from what i can gather from the good people here ,looks like HED-68610 or 68616 may work,,,also CornFed tipped me on Hookers #2455 in above post ,his look like they tuck up nice?
got a trade working now on a 350 block for a new mini torque starter,friend of mine with a 8 sec truck,got a sponspor to go thru, may get a good price on a Powermaster or Tilton form him?
Thanks
Jon

01-24-2007, 07:18 PM	#1
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	TraderJon pics for you. Let me know if you need more info... Last edited by corn; 10-04-2007 at 06:37 PM.

01-24-2007, 08:05 PM	#3
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: TraderJon Wow! Those do hang pretty low. Will they fit a 4X4? They forgot to tell us there are a few snags along the way, didnt they? Good luck with your project.

01-24-2007, 08:33 PM	#4
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: TraderJon Iirc , the part # says 68to72 c10 1/2 ton bbc 2wd,guess i shoulda got some more info from the board before i bought em ? I know my truck is lowered ,but i dont think there would be a lot of clearance in a stock ride height truck? They wont make it around here on these fine roads,potholes the size of propane tanks ,our local road building crew cant spell pavement ! Thanks Jon

01-24-2007, 08:36 PM	#5
84_4x4 Registered User Join Date: Oct 2006 Location: Louisville Ky Posts: 179	Re: TraderJon took me a while to see what you were taking a picture off but those headers look nice

01-24-2007, 08:43 PM	#6
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: TraderJon There pretty,but i'm not going to be able to run them unless i bag the truck? Was shopping around for the chevelle shorty header part # for our trucks? Thanks Jon

01-24-2007, 07:59 PM	#2
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: TraderJon Thanks Corn You have a lot more clearance than mine. I'd be lucky to clear a fire ant with these,I guess thats what i get for bragging on the fit before i took down off the jack stands ? I put some temporary flex pipe on it to hear the motor for break-in,it's eat 2 starters already & aint left the garage,gonna order a mini torque when i hit the lotto,on a positive note,,the cam sounds good,will try to get a video/audio clip for you when it quits raining,we've had 2" since yesterday & my yard is hub deep to a ferris wheel,may be tomorrow. thanks Jon Attached Images

01-24-2007, 08:51 PM	#7
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: TraderJon wow john .. if those are from summit i would be sending them back.. thats there deal 100 % happy..i know those hookers were not cheap. let us know how this plays out.. mark

01-24-2007, 09:41 PM	#8
TraderJon Registered User Join Date: Dec 2005 Location: League City,Texas Posts: 66	Re: TraderJon Mark,,I bought these at my local Autozone ,,same price as Summit,,gonna call tomorrow & see if i can return them? They may give me a hassle ? Digging around Summit now looking at the hedman chevelle shorty's,,,from what i can gather from the good people here ,looks like HED-68610 or 68616 may work,,,also CornFed tipped me on Hookers #2455 in above post ,his look like they tuck up nice? got a trade working now on a 350 block for a new mini torque starter,friend of mine with a 8 sec truck,got a sponspor to go thru, may get a good price on a Powermaster or Tilton form him? Thanks Jon



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.