What did y'all get done this weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 01-28-2007, 08:28 PM

Its that time of week again

I finished up the welding of new pieces of steel in my swb 4x4 frame and started the re-assembly of the rear axle.
What did y'all get done this weekend?

jeffspower · 01-28-2007, 08:38 PM

I scored a NP205, adapter & shifter that came off a TH400! We all know how hard those are to find. It was in the newspaper classifieds. I don't really have a need for it now, but it won't hurt to have laying around.

madiron · 01-28-2007, 08:44 PM

nothing at all tooooooo cooooooold lol

*Shane* · 01-28-2007, 08:46 PM

Quote:

Originally Posted by madiron

nothing at all tooooooo cooooooold lol

Roger that ... it never got much above freezin' here this weekend. I know our Northern members will snicker, but us Southern Boys ain't used to his sort of weather.

redhead69 · 01-28-2007, 08:49 PM

I finally got the sm465 pulled. What a PITA. Windy, chilly, and in the gravel on my back!!

65-72 chevytoys · 01-28-2007, 08:58 PM

Shane its nice and warm down here. After finishing the garage floor earlier this week. I had the new jimmy delivered Sat morning. Today I started going through it ran the numbers and found it is a numbers matching 307 block, 350trans and rear with 3:07 gears. The rear got a new gasket and 2qts of 90W. I pulled the valve covers to adjust the lash and run the head numbers. Unfornutaly the heads don't match the engine or each other one is a 60cc and the other is a 76cc. I wonder if that had anything to do with lifter knock it heard? Looks like its time to save up for a mild cam set of aluminum vortechs, intake and carb.

woodridge · 01-28-2007, 09:03 PM

We were out of school Friday because of the flu so I got an early start. I got the firewall and some other patch panels cut out of the 72 cab that's junk, cut up the frame saving the overloads and bed mounts, loaded up the first of several loads of the 35 year accumalation of tires (don't ask) and hauled them off. Saturday worked at Church most of the day and cut some firewood that afternoon. We are out again tomorrow and hopefully will get a little more done.

70 net440 · 01-28-2007, 09:11 PM

Got all of the old wood removed from my son's '67. He's redoing the bed wood for his senior project. Hey Redhead, I've found a large piece of thick cardboard works great on gravel for working under the truck. Of course we own a recycling yard so, I have access to lots of cardboard.

GMCBubba · 01-28-2007, 09:13 PM

new master cylinder. only had a few minutes. but it felt good to get the hands greasy again

superjeer · 01-28-2007, 09:14 PM

Last week we took in a new foster son and this weekend I hemmed (sp) his pants. (He's a little rounder than he is tall

) That and a lot of babysitting. I never even made it into the garage.

I did look up online and find out that almost everything for a 6.2 diesel is special order :@

*trkklr77* · 01-28-2007, 09:18 PM

fixed this

skokie · 01-28-2007, 09:19 PM

Put a new steering gear on the 68.

1BadSS · 01-28-2007, 09:21 PM

Finished putting the power brake setup on my truck, almost finished taking the 69 front clip off, in favor of the brand new 68 front clip, finally got my motor back together and signed the lease on a shop 2x as big as mine is currently.

2x the size of the shop means I can fit 2x the amount of 67-72's in it. So now I need to go buy another one.

Draggn66 · 01-28-2007, 09:22 PM

Got my 94 amp alt. installed with the conversion kit from PICKMUP

Thanks Frank

msgross · 01-28-2007, 09:24 PM

pulled engine (mounted on stand), pulled SM465 and Rockwell TC! Frame is ready to complete stripping and media blast in a few weeks....

stayed warm thanks to the garage that we are renting! woohoo, thank god for propane!

dishow · 01-28-2007, 09:25 PM

i set the dwell, timed, an did a compression check on all cylinders on my motor.

timcos · 01-28-2007, 09:36 PM

Nothing...cannot warm up my garage. I did peruse my new assembly manual.

Seems like most of it does not even apply to my '72...but still fun to look at.

corn · 01-28-2007, 09:40 PM

0...

FarmTruk · 01-28-2007, 09:45 PM

Assembled (2) Sauder brand KD bookcases. What a PITA. "Some" assembly required. HA...gimme a break. They took forever to put all those pieces together. Could have been worse though. At least I had all the pieces/parts, and the weather was kinda nice this weekend.

chevyboy55 · 01-28-2007, 10:01 PM

Truck wise...Nothing.We went to visit my daughter & my money where they go to college.(miss em both)

Rick Mills · 01-28-2007, 10:03 PM

Fixed an electrical problem. Took the hood off and am getting ready to pull the engine. Need to replace a rear main seal. Can't do it in the pickup with a 7qt. after market oil pan.

john@thepier · 01-28-2007, 10:08 PM

I had to guide all weekend, day and night. Made lots of money for my truck addiction!! This was our biggest walleye of the weekend. I know this shot is not truck related, but the money I made is. JOHN

gouldie · 01-28-2007, 10:18 PM

called jeff gordon **** when he got out of his car at the rolex 24 in daytona. the pit crew looked over at me after i said it.

as for the truck still working on my tail light problem

ChevyFan24 · 01-28-2007, 10:23 PM

Installed the crossmembers in the frame, ECE stainless tank, and hidden hitch. Working with all freshly powdercoated pieces is money well spent.

whatnow123 · 01-28-2007, 10:36 PM

replaced the drivers floor and rocker, started the pass. side. what a pain.

01-28-2007, 08:28 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	What did y'all get done this weekend? Its that time of week again I finished up the welding of new pieces of steel in my swb 4x4 frame and started the re-assembly of the rear axle. What did y'all get done this weekend?

01-28-2007, 08:38 PM	#2
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: What did y'all get done this weekend? I scored a NP205, adapter & shifter that came off a TH400! We all know how hard those are to find. It was in the newspaper classifieds. I don't really have a need for it now, but it won't hurt to have laying around. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

01-28-2007, 08:44 PM	#3
madiron choppin it up Join Date: Jun 2006 Location: northwest iowa Posts: 55	Re: What did y'all get done this weekend? nothing at all tooooooo cooooooold lol __________________ living the low life

01-28-2007, 08:49 PM	#5
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: What did y'all get done this weekend? I finally got the sm465 pulled. What a PITA. Windy, chilly, and in the gravel on my back!! __________________ Currently truckless

01-28-2007, 08:58 PM	#6
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: What did y'all get done this weekend? Shane its nice and warm down here. After finishing the garage floor earlier this week. I had the new jimmy delivered Sat morning. Today I started going through it ran the numbers and found it is a numbers matching 307 block, 350trans and rear with 3:07 gears. The rear got a new gasket and 2qts of 90W. I pulled the valve covers to adjust the lash and run the head numbers. Unfornutaly the heads don't match the engine or each other one is a 60cc and the other is a 76cc. I wonder if that had anything to do with lifter knock it heard? Looks like its time to save up for a mild cam set of aluminum vortechs, intake and carb. __________________ 2004 Chevy Silverado 1500LS SWB 5.3L 2004 Corvette Z16 #770 Wish I had not sold 72 blazer

01-28-2007, 09:03 PM	#7
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: What did y'all get done this weekend? We were out of school Friday because of the flu so I got an early start. I got the firewall and some other patch panels cut out of the 72 cab that's junk, cut up the frame saving the overloads and bed mounts, loaded up the first of several loads of the 35 year accumalation of tires (don't ask) and hauled them off. Saturday worked at Church most of the day and cut some firewood that afternoon. We are out again tomorrow and hopefully will get a little more done. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-28-2007, 09:11 PM	#8
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: What did y'all get done this weekend? Got all of the old wood removed from my son's '67. He's redoing the bed wood for his senior project. Hey Redhead, I've found a large piece of thick cardboard works great on gravel for working under the truck. Of course we own a recycling yard so, I have access to lots of cardboard. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

01-28-2007, 09:13 PM	#9
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	Re: What did y'all get done this weekend? new master cylinder. only had a few minutes. but it felt good to get the hands greasy again __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.

01-28-2007, 09:14 PM	#10
superjeer Registered User Join Date: May 2004 Location: Horseheads, NY Posts: 235	Re: What did y'all get done this weekend? Last week we took in a new foster son and this weekend I hemmed (sp) his pants. (He's a little rounder than he is tall ) That and a lot of babysitting. I never even made it into the garage. I did look up online and find out that almost everything for a 6.2 diesel is special order :@ __________________ Thanks, Jere '72 Cheyenne LWB, Dark Olive.. gone. Others02 Sienna XLE, 1998 Mercury Tracer Past in order of exit 04 xB RS1, 04 xB BCP, 87 Sciorrco, 97 Safari, 95 Contour, some dodge stratus, 87 Nova notchback, 87 Nova 5 door, 84 Z28. 81 C10 LWB 305 http://www.elmiradhc.com/ http://elmirahockey.com/

01-28-2007, 09:18 PM	#11
trkklr77 Account Suspended Join Date: Aug 2006 Location: vacaville ca, because it as far from indy as i can be Posts: 777	Re: What did y'all get done this weekend? fixed this Attached Images

01-28-2007, 09:19 PM	#12
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,334	Re: What did y'all get done this weekend? Put a new steering gear on the 68. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-28-2007, 09:21 PM	#13
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Re: What did y'all get done this weekend? Finished putting the power brake setup on my truck, almost finished taking the 69 front clip off, in favor of the brand new 68 front clip, finally got my motor back together and signed the lease on a shop 2x as big as mine is currently. 2x the size of the shop means I can fit 2x the amount of 67-72's in it. So now I need to go buy another one. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

01-28-2007, 09:22 PM	#14
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: What did y'all get done this weekend? Got my 94 amp alt. installed with the conversion kit from PICKMUP Thanks Frank __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG

01-28-2007, 09:24 PM	#15
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: What did y'all get done this weekend? pulled engine (mounted on stand), pulled SM465 and Rockwell TC! Frame is ready to complete stripping and media blast in a few weeks.... stayed warm thanks to the garage that we are renting! woohoo, thank god for propane! __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

01-28-2007, 09:25 PM	#16
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: What did y'all get done this weekend? i set the dwell, timed, an did a compression check on all cylinders on my motor. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4



Register or Log In To remove these advertisements.

01-28-2007, 09:36 PM	#17
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: What did y'all get done this weekend? Nothing...cannot warm up my garage. I did peruse my new assembly manual. Seems like most of it does not even apply to my '72...but still fun to look at. __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

01-28-2007, 09:40 PM	#18
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: What did y'all get done this weekend? 0...

01-28-2007, 09:45 PM	#19
FarmTruk In Memoriam... Join Date: Nov 2006 Location: Wallburg, NC Posts: 1,216	Re: What did y'all get done this weekend? Assembled (2) Sauder brand KD bookcases. What a PITA. "Some" assembly required. HA...gimme a break. They took forever to put all those pieces together. Could have been worse though. At least I had all the pieces/parts, and the weather was kinda nice this weekend. __________________ '68 C10 SWB 307ci 2BBL *FarmTruk Pics Here* *"You know, doing what is right is easy. The problem is knowing what is right."* Last edited by FarmTruk; 01-28-2007 at 09:46 PM.

01-28-2007, 10:01 PM	#20
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: What did y'all get done this weekend? Truck wise...Nothing.We went to visit my daughter & my money where they go to college.(miss em both)

01-28-2007, 10:03 PM	#21
Rick Mills Senior Member Join Date: Dec 2003 Location: Colorado Posts: 351	Re: What did y'all get done this weekend? Fixed an electrical problem. Took the hood off and am getting ready to pull the engine. Need to replace a rear main seal. Can't do it in the pickup with a 7qt. after market oil pan. __________________ The Fastor Pastor '68 swb, 447 BBC/ 6-71 Weiand, Dual 950 Bigs Carbs/ 2 1/2" Header tubes - 4" collectors/ M-21 4speed: '70 swb; TH-400 - bagged & shaved. Looking for new engine or parts. Wife - Original {A Real Classic!}

01-28-2007, 10:08 PM	#22
john@thepier Senior Member Join Date: Aug 2004 Location: Lake Geneva, WI 53147 Posts: 970	Re: What did y'all get done this weekend? I had to guide all weekend, day and night. Made lots of money for my truck addiction!! This was our biggest walleye of the weekend. I know this shot is not truck related, but the money I made is. JOHN Attached Images

01-28-2007, 10:18 PM	#23
gouldie Registered User Join Date: Oct 2006 Location: daytona beach Posts: 101	Re: What did y'all get done this weekend? called jeff gordon **** when he got out of his car at the rolex 24 in daytona. the pit crew looked over at me after i said it. as for the truck still working on my tail light problem __________________ 67 c10 250 I6 3 on the tree no options air ride, paint and big block coming within the next 23 years 2001 mustang gt for going fast Last edited by Rod; 01-28-2007 at 11:06 PM. Reason: must be wanting a ban, read the rules

01-28-2007, 10:23 PM	#24
ChevyFan24 Junior Member Join Date: Nov 2006 Location: Indiana Posts: 181	Re: What did y'all get done this weekend? Installed the crossmembers in the frame, ECE stainless tank, and hidden hitch. Working with all freshly powdercoated pieces is money well spent.

01-28-2007, 10:36 PM	#25
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: What did y'all get done this weekend? replaced the drivers floor and rocker, started the pass. side. what a pain.

Register or Log In To remove these advertisements.