FS: Parting out 79 Blazer NJ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ScottH** · 02-03-2007, 10:44 AM

I have a 79 blazer I bought as a parts truck for the engine. Trans is shot, dashpad no good, no hood, front grill, tilt column, or console. Will be taking it to the crusher soon. Sorry no shipping on large parts.

Specific pics available, any questions please let me know.

I'll sell the entire truck for $200 without ralleys, $300 with.

Thanks

Scott

BIG_BLAZER86 · 02-03-2007, 10:45 AM

Front seats to BIG to ship to 43558.

**ScottH** · 02-03-2007, 11:50 AM

Yupper, sorry

f.monroe · 02-03-2007, 01:11 PM

What condition are both of the dash bezels and also the door panel trims in ? How much shipped to Tx 77836 ? Frank

**ScottH** · 02-03-2007, 01:25 PM

Frank, the door panels are rough, not very nice. Bezel is broken around radio area. Probably not what u r looking for but can pics if you want.

Scott

BowTieOgre · 02-03-2007, 02:45 PM

Im looking for a PS setup if possible.

*72lb4x4* · 02-03-2007, 05:13 PM

If it has a front sway bar, would you care to remove the brackets riveted to the frame?

A pic would be nice to make sure they are what I'm looking for, but I'm fairly certain they are.

Price and shipping to 76051?

Thanks

**ScottH** · 02-03-2007, 05:35 PM

Bowtieogre & 72lb4x4, if I can remove these parts I'll let you know.

BowTieOgre · 02-03-2007, 07:09 PM

No worries man. Im starting wonder if the gear would work on my 2wd anyway. I will try to find out for sure before you start wrenching.

blink32 · 02-03-2007, 07:47 PM

u still got tow hooks on that bad boy?

**ScottH** · 02-03-2007, 08:33 PM

Bowtieogre, the box should work but the pitman arm is different between two and four wheel drive I think. If you find out for sure let me know.

Tony, keeping those for my truck.

jc · 02-03-2007, 09:08 PM

scott i sent this link to the guy from morganville for ya
i was asking about the rears for him
even if hes not interested maybe we ll get a new local member

**ScottH** · 02-03-2007, 10:09 PM

Sounds good, thanks John

jc · 02-04-2007, 11:32 PM

blazer is sold pending that i get my a$$ there to pick it up

thanks scott

if scott doesnt mind i will see what i can do about the parts some of you requested

jc · 02-07-2007, 08:16 AM

this truck is being scraped saturday defenatly
there are no rear middle bumper brackets (bumper bolts directly to the frame)

parts im selling off of it as follows
no shipping

6 lug 8in rallies decent condition $85 absalutly firm with 4 tires tires probably arnt worth anything other than rolling the truck around the yard
i will not dismount or ship (pics upon request)

front buckets $50 it looks like all foam is usable
rear bench $40
take all seats for $70 NO SHIPPING

gas tank is removed and ready to go, scott thinks its a 31 gal??or so
i have to check inside for condition. $25 if its as good as i think if not ill scrap it $25 no shipping

rust free tailgate all mechanicals need replaceing or fixing pics upon request no shipping window is still there but i didnt check for scratching
$100 firm

all these parts are off and ready to go

85oldbluetruck · 02-07-2007, 05:16 PM

Does the washer pump work? If so, how much do you want for it.

edman87 · 02-07-2007, 08:12 PM

It got a 205 t case? The adapters go for 100- 200$. Just thought I would add that so it don't get thrown out.

jc · 02-07-2007, 08:25 PM

washer pump, ill see if i can test it

205 transfer case , i have no idea the only thing i looked at was to see if there was an adapter between the trans and case.
it didnt look like it .
i will check further just incase ill be out there thursday and friday night pulling the last of what i can thik of
it has to go saturday though the yard is littered with trucks

**ScottH** · 02-07-2007, 09:22 PM

You have plenty more room for more junk in your back yard.

BTW that truck SHOULD have a NP203, but worth checkin.
Oh yea, didn't I have that on my list, lol.

jc · 02-07-2007, 09:35 PM

Quote:

Originally Posted by ScottH

You have plenty more room for more junk in your back yard.

BTW that truck SHOULD have a NP203, but worth checkin.
Oh yea, didn't I have that on my list, lol.

i gotta keep the neighbors happy they have never given me a problem and probably never will but no need to push it.

good i didnt want to take it out any way

jc · 02-08-2007, 09:04 PM

Quote:

Originally Posted by 85oldbluetruck

Does the washer pump work? If so, how much do you want for it.

i forgot to check the pump
i noticed the wiper motor was newer it still has an autozone or some thing like that sticker on it

scott ,i saw the rear sway bar brackets but ran out of energy tonight
it took me a while to get the front sway bar brackets off
ill get em tomarrow

its a 203 case

jc · 02-10-2007, 12:00 PM

washer pump was no good

scott i got all the stuff asked for off COME GET IT!!

the truck has been scraped!
i still have the tailgate and gas tank thats it.

02-03-2007, 10:44 AM	#1
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	FS: Parting out 79 Blazer NJ I have a 79 blazer I bought as a parts truck for the engine. Trans is shot, dashpad no good, no hood, front grill, tilt column, or console. Will be taking it to the crusher soon. Sorry no shipping on large parts. Specific pics available, any questions please let me know. I'll sell the entire truck for $200 without ralleys, $300 with. Thanks Scott Attached Images __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon Last edited by ScottH; 02-03-2007 at 05:36 PM.

02-03-2007, 10:45 AM	#2
BIG_BLAZER86 Registered User Join Date: Mar 2004 Location: SWANTON OHIO Posts: 114	Re: FS: Parting out 79 Blazer NJ Front seats to BIG to ship to 43558. __________________ 81 blazer 2wd tukin 30's 07 Jeep Grand Cherokee on 26's Tube chassis 5.3,dual T cases,54" boggers,steering rocks Dodge 3500 with some mods

02-03-2007, 11:50 AM	#3
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Parting out 79 Blazer NJ Yupper, sorry __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-03-2007, 01:11 PM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: FS: Parting out 79 Blazer NJ What condition are both of the dash bezels and also the door panel trims in ? How much shipped to Tx 77836 ? Frank __________________ Born and proudly residing in a Red State !

02-03-2007, 01:25 PM	#5
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Parting out 79 Blazer NJ Frank, the door panels are rough, not very nice. Bezel is broken around radio area. Probably not what u r looking for but can pics if you want. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-03-2007, 02:45 PM	#6
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: Parting out 79 Blazer NJ Im looking for a PS setup if possible. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

02-03-2007, 05:13 PM	#7
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: FS: Parting out 79 Blazer NJ If it has a front sway bar, would you care to remove the brackets riveted to the frame? A pic would be nice to make sure they are what I'm looking for, but I'm fairly certain they are. Price and shipping to 76051? Thanks

02-03-2007, 05:35 PM	#8
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Parting out 79 Blazer NJ Bowtieogre & 72lb4x4, if I can remove these parts I'll let you know. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-03-2007, 07:09 PM	#9
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: FS: Parting out 79 Blazer NJ No worries man. Im starting wonder if the gear would work on my 2wd anyway. I will try to find out for sure before you start wrenching. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

02-03-2007, 07:47 PM	#10
blink32 Registered User Join Date: Dec 2003 Location: OTR Posts: 338	Re: FS: Parting out 79 Blazer NJ u still got tow hooks on that bad boy?

02-03-2007, 08:33 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Parting out 79 Blazer NJ Bowtieogre, the box should work but the pitman arm is different between two and four wheel drive I think. If you find out for sure let me know. Tony, keeping those for my truck. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-03-2007, 09:08 PM	#12
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: FS: Parting out 79 Blazer NJ scott i sent this link to the guy from morganville for ya i was asking about the rears for him even if hes not interested maybe we ll get a new local member __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

02-03-2007, 10:09 PM	#13
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Parting out 79 Blazer NJ Sounds good, thanks John __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-04-2007, 11:32 PM	#14
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: FS: Parting out 79 Blazer NJ blazer is sold pending that i get my a$$ there to pick it up thanks scott if scott doesnt mind i will see what i can do about the parts some of you requested __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

02-07-2007, 08:16 AM	#15
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: FS: Parting out 79 Blazer NJ this truck is being scraped saturday defenatly there are no rear middle bumper brackets (bumper bolts directly to the frame) parts im selling off of it as follows no shipping 6 lug 8in rallies decent condition $85 absalutly firm with 4 tires tires probably arnt worth anything other than rolling the truck around the yard i will not dismount or ship (pics upon request) front buckets $50 it looks like all foam is usable rear bench $40 take all seats for $70 NO SHIPPING gas tank is removed and ready to go, scott thinks its a 31 gal??or so i have to check inside for condition. $25 if its as good as i think if not ill scrap it $25 no shipping rust free tailgate all mechanicals need replaceing or fixing pics upon request no shipping window is still there but i didnt check for scratching $100 firm all these parts are off and ready to go __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)



Register or Log In To remove these advertisements.

02-07-2007, 05:16 PM	#16
85oldbluetruck Registered User Join Date: Oct 2006 Location: Dayton Ohio Posts: 32	Re: FS: Parting out 79 Blazer NJ Does the washer pump work? If so, how much do you want for it.

02-07-2007, 08:12 PM	#17
edman87 junk collector Join Date: Dec 2004 Location: above Baton Rouge, LA Posts: 693	Re: FS: Parting out 79 Blazer NJ It got a 205 t case? The adapters go for 100- 200$. Just thought I would add that so it don't get thrown out. __________________ '87/89/76 K5 in progress '99 K2500 short crew '91 camaro rs '98 jeep tj '52 willys cj3a

02-07-2007, 08:25 PM	#18
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: FS: Parting out 79 Blazer NJ washer pump, ill see if i can test it 205 transfer case , i have no idea the only thing i looked at was to see if there was an adapter between the trans and case. it didnt look like it . i will check further just incase ill be out there thursday and friday night pulling the last of what i can thik of it has to go saturday though the yard is littered with trucks __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

02-07-2007, 09:22 PM	#19
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: FS: Parting out 79 Blazer NJ You have plenty more room for more junk in your back yard. BTW that truck SHOULD have a NP203, but worth checkin. Oh yea, didn't I have that on my list, lol. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

02-10-2007, 12:00 PM	#22
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: FS: Parting out 79 Blazer NJ washer pump was no good scott i got all the stuff asked for off COME GET IT!! the truck has been scraped! i still have the tailgate and gas tank thats it. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER) Last edited by jc; 02-10-2007 at 12:02 PM.

Register or Log In To remove these advertisements.