|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-07-2007, 06:42 AM
|
#1 |
|
Registered User
Join Date: Dec 2003
Location: gilbertsville,KY
Posts: 111
|
396/th400 Kickdown Switch
i need some help here guys, i have a 70 C20 with a 396/TH400 and can't figure out how to wire up the electric kickdown switch, i have a edelbrock performer RPM intake and a EDL-1411 750 cfm carb, i kept the original kickdown switch and also have a B&M TH400 kickdown switch(part# BMM-20297) i just need some help or pictures, also the metal rod from the accelerator pedal hits the firewall. if anybody has this same setup could you post some pics or just explain how you were able to wire this up. thanks-joe
__________________
1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400 |
|
|
|
02-07-2007, 08:31 AM
|
#2 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: 396/th400 Kickdown Switch
heres my edelbrock intake and my b&m switch on a quadrajet
mines a 69 c-20 i don't know if your linkage is the same as mine? Last edited by rage'nrat638; 07-12-2007 at 06:57 AM. |
|
|
|
|
02-07-2007, 04:26 PM
|
#3 |
|
Registered User
Join Date: Dec 2003
Location: gilbertsville,KY
Posts: 111
|
Re: 396/th400 Kickdown Switch
thanks for the pictures, i think the linkage on a edelbrock is a little different, did you just bend the stock throttle rod like that? any other issues with it? thanks again-joe
__________________
1992 Jeep Cherokee 4.0 AUTO 1972 C10 350/350 1971 C1500 350/350 1970 C20 396/400 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
