My new addition: 72 K5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Almighty Wez · 02-07-2007, 09:02 AM

I won this K5 on Ebay afew weeks back and finally got around to going down to MD to pick it up. Here she is:

And last, for good measure, my friends 72 C-10 w/ my 85 K5 in the background

I'm going to have my work cut out in the body area, two words: RUST BULLET . At least I'll get some experience in metal working. The driver's side floor has a good hole starting behind the seat and the pass. side has a small one starting. Plus the two holes on the windshield frame. Those are going to be interesting to try to fix.... The plan is to drop in a "1511" 400sbc hopefully in the spring. It came with a new T350 trans and everything else needed to run. So once the engine is done, it should be good to go. Eventually, I'll do either a 4 or 6" lift, 35s and a softop.

**special-K** · 02-07-2007, 09:53 AM

Not bad for around here.I have a couple parts Blazers.Let me know if you need anything.

krue · 02-07-2007, 11:23 AM

Welcome to the board from South Mississippi!

**Yukon Jack** · 02-07-2007, 11:36 AM

Welcome to this board - saw you post your K5 over at ck5.com. Looks like a great K5!

LUV2XCLR8 · 02-07-2007, 04:06 PM

AND

**jaros44sr** · 02-07-2007, 06:55 PM

Stop over to North Wales, your not that far away. My holes were bigger than your holes.

Mostly around on weekends and nights. J.

bad_turbo · 02-07-2007, 10:09 PM

good looking start!

Almighty Wez · 02-09-2007, 09:49 AM

Thanks guys. I'm already up to 640$ on the LMC site plus a gallon of Rust Bullet on the way. So let the fun begin!

Chevyman63 · 02-09-2007, 09:54 AM

from Michigan!

There is no better place in the world for info on these trucks.

**Ron 586** · 02-15-2007, 09:24 AM

Welcome and enjoy. Nothing like a project to keep a man out/in trouble.

Almighty Wez · 02-15-2007, 10:53 AM

I spent most of last weekend cleaning and spray primering my other set of front fenders. They turned out pretty good, good enough for now at least. Before I get too far into the body work, I have to do some researching about what primer will be the best to use and figure out how "nice" I want the body to be. Just a matter of how much I want to spend I guess

Its definetely not going to be a show truck, it might just get fully primered and stay that way.

02-07-2007, 09:02 AM	#1
Almighty Wez JNZ Finishing LLC. Join Date: Dec 2006 Location: Dublin PA Posts: 132	My new addition: 72 K5 I won this K5 on Ebay afew weeks back and finally got around to going down to MD to pick it up. Here she is: And last, for good measure, my friends 72 C-10 w/ my 85 K5 in the background I'm going to have my work cut out in the body area, two words: RUST BULLET . At least I'll get some experience in metal working. The driver's side floor has a good hole starting behind the seat and the pass. side has a small one starting. Plus the two holes on the windshield frame. Those are going to be interesting to try to fix.... The plan is to drop in a "1511" 400sbc hopefully in the spring. It came with a new T350 trans and everything else needed to run. So once the engine is done, it should be good to go. Eventually, I'll do either a 4 or 6" lift, 35s and a softop.

02-07-2007, 09:53 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My new addition: 72 K5 Not bad for around here.I have a couple parts Blazers.Let me know if you need anything. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-07-2007, 11:23 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: My new addition: 72 K5 Welcome to the board from South Mississippi! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

02-07-2007, 11:36 AM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: My new addition: 72 K5 Welcome to this board - saw you post your K5 over at ck5.com. Looks like a great K5! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

02-07-2007, 04:06 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: My new addition: 72 K5 AND __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

02-07-2007, 06:55 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: My new addition: 72 K5 Stop over to North Wales, your not that far away. My holes were bigger than your holes. Mostly around on weekends and nights. J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-07-2007, 10:09 PM	#7
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: My new addition: 72 K5 good looking start! __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

02-09-2007, 09:49 AM	#8
Almighty Wez JNZ Finishing LLC. Join Date: Dec 2006 Location: Dublin PA Posts: 132	Re: My new addition: 72 K5 Thanks guys. I'm already up to 640$ on the LMC site plus a gallon of Rust Bullet on the way. So let the fun begin! __________________ JNZ FINISHING LLC.- PM me about our POWDERCOATING & CERAMIC services 67 K10 shortbed....6"lift, 35s, 350/350/208

02-09-2007, 09:54 AM	#9
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: My new addition: 72 K5 from Michigan! There is no better place in the world for info on these trucks. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

02-15-2007, 09:24 AM	#10
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: My new addition: 72 K5 Welcome and enjoy. Nothing like a project to keep a man out/in trouble. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

02-15-2007, 10:53 AM	#11
Almighty Wez JNZ Finishing LLC. Join Date: Dec 2006 Location: Dublin PA Posts: 132	Re: My new addition: 72 K5 I spent most of last weekend cleaning and spray primering my other set of front fenders. They turned out pretty good, good enough for now at least. Before I get too far into the body work, I have to do some researching about what primer will be the best to use and figure out how "nice" I want the body to be. Just a matter of how much I want to spend I guess Its definetely not going to be a show truck, it might just get fully primered and stay that way. __________________ JNZ FINISHING LLC.- PM me about our POWDERCOATING & CERAMIC services 67 K10 shortbed....6"lift, 35s, 350/350/208



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.