can a new-B get some

[72rat]

i want to lower my truck so i can drag the frame with titanium blocks

but what is the best way to acheive this @ a med. cost and would it be better to have a longwheelbase or a short bed and if i was to get a 71swb frame for 100bucks is that worth it?

thx for all yalws time

[Joe67]

I believe the only way to drag is a bag suspension setup

Personally, if I were to build a bagged truck, I would not go cheap on components.

67-72 SWB chassis/frames go for $100-400 depending on components and condition. If it is 100% complete straight roller for $100 I'd say buy it

[bagged69c10]

Its alot of work to get these trucks to lay full frame. And its not all that cheap either. I would say get the shortbed, at least then you could run a one piece driveshaft.

[JAKES 68GMC]

Why the hell would you want to drag the frame??? Wouldn't that stave some stuff up?

[72rat]

Originally Posted by bagged69c10

Its alot of work to get these trucks to lay full frame. And its not all that cheap either. I would say get the shortbed, at least then you could run a one piece driveshaft.

is their anyway you can give me more info on how to do this i plan on going with A/R.T. but what size c-notch will i need and what back kit and front kit will i need or does it have to be all custome?

thx for all your time

[72rat]

Originally Posted by JAKES 68GMC

Why the hell would you want to drag the frame??? Wouldn't that stave some stuff up?

thats what i want to do is just drag around town

if you build it right you wont mess anything up

[72rat]

by the way where was this post moved to?

[jimmydean]

Originally Posted by 72rat

thats what i want to do is just drag around town

if you build it right you wont mess anything up

If you build it right, it won't be cheap. I'm a cheap bastard, but even I know it's not a good idea to skimp when it comes to suspension parts. Do it right, do it once.

[72rat]

Originally Posted by jimmydean

If you build it right, it won't be cheap. I'm a cheap bastard, but even I know it's not a good idea to skimp when it comes to suspension parts. Do it right, do it once.

yes Sir!

[sixtysevengmc]

heat the springs with a torch and ride around on the bumpstops

[Shane]

You want to lower a vehicle on the cheap so you can drag it on titanium blocks ... quick question for ya, have you priced titanium lately?

[BACKYARD88]

Originally Posted by Shane

You want to lower a vehicle on the cheap so you can drag it on titanium blocks ... quick question for ya, have you priced titanium lately?

[jimmydean]

Originally Posted by Shane

You want to lower a vehicle on the cheap so you can drag it on titanium blocks ... quick question for ya, have you priced titanium lately?

The less he spends on lowering, the more blocks he can afford. Sheesh

[72rat]

lol @ all maybe just a steel block just dont want to drag the frame to paper thin

[Shane]

how about not dragging anything at all ... I know your local law enforcement officers and the street/road commission in your area would greatly appreciate it.

really and truly there is no need to drag anything and i don't think you will find many guys here who care anything about that sort of thing. The guys here want their trucks as low as possible, but they want to do it WITHOUT dragging anything.

If you are dead set on dragging your truck, you might want to check with a mini-truck forum where they seem to enjoy that sort of thing.

[72rat]

thx shane
i under stand where you are comming from and when i got the truck it was not the plan i had in mind but i have made my mind up now and that is what i want to do---------flat black cut to hell and draggggggen and who knows mabey the 71 swb i will be getting i can go the other way------- low and clean

[Ram-Man]

Originally Posted by Shane

You want to lower a vehicle on the cheap so you can drag it on titanium blocks ... quick question for ya, have you priced titanium lately?

But he only wants to drag the frame. No blocks needed to do this. You should also get plenty sparks also.

[72rat]

Originally Posted by 72rat

is their anyway you can give me more info on how to do this i plan on going with A/R.T. but what size c-notch will i need and what back kit and front kit will i need or does it have to be all custome?

thx for all your time

bump for answer

[Shane]

button on top of page

[72rat]

thx shane

[bagged69c10]

Heres you a forum where we love draggin.http://www.dfwkustoms.com/forums/index.php
I like draggin blocks. Most cops around here dont write tickets for it and it doesn't really tear up the road. In a week you dont even see the marks. And here is the kit you need for the front http://*****************/67-87Fullsiz...pperPlates.php

[72rat]

Originally Posted by bagged69c10

Heres you a forum where we love draggin.http://www.dfwkustoms.com/forums/index.php
I like draggin blocks. Most cops around here dont write tickets for it and it doesn't really tear up the road. In a week you dont even see the marks. And here is the kit you need for the front http://*****************/67-87Fullsiz...pperPlates.php

thx 69 i guess i will go their and ask what kits i need and how to do

[pharcyde05]

AIR is the only way to get low enuff
and blocks are a great idea
titanium is a lil $$$ but its great for special ocasions and you can always use steel for every day use
blocks will also prevent and damage that could be done to frame or suspension

[h2omelon]

its going to take a lot of work. this is still 3 inches from laying frame! ive still got to z the front frame section and intall my 4 link! plus i built a new rear frame section. i also have art upper and lower arms and drop spindles$$$$$$

[talonted1990]

Originally Posted by 72rat

lol @ all maybe just a steel block just dont want to drag the frame to paper thin

You could body drop your truck and put hydraulics on it but then you would be draggin body ...... like me.