PARTS: tach, tilt, gate and misc... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 03-07-2007, 02:27 PM

Hope to start working on a truck this spring so it is time to clean up a little and generate some funds.
Vacuum tin. Nice condition. $45 shipped
Black steering wheels from 73 and newer are $35 each shipped. Both are nice.
Tach cluster with air gauge and 80 pound oil gauge. I buffed the lens and added the correct fuel gauge. This will need a printed circuit. The tach needle moves freely. I do not know what works or what doesn't. Bezel is pretty nice with a crack on the left side where the screw goes in. Tach head has some fading. $225 shipped.
Tilt column from a pickup. Shifter feels tight ans so does the tilt mech. It is missing the turn signal parts and someone got into the wiring but patched it. This is the way i bought it. $225 shipped
Amp gauge. looks like it should fit in a cluster. Looks nice. $15 shipped
GMC tailgate. No rust holes. Very little bow. Does have some small dents on top. Should be a pretty nice gate with paint. $150 NO ship
68 Chevy 3/4 ton hub caps. These go on the wheels with spring clips. Drivers. $35 shipped
GMC headlight rings. Will clean up ok. Bigger ding in one of them. Drivers $30 shipped
68 chevy grill with trim. Couple small dings. $175 NO ship
Respond in thread, will ship to canada, but will be a little more.

**too much stuff** · 03-07-2007, 02:31 PM

More pics. I am also looking for NOS woodgrain lower chrome, 69-72 tow hooks, am/fm, and a speedwarning gauge.

**too much stuff** · 03-07-2007, 02:33 PM

Last bunch of pics for now...

PT'S 70 CST · 03-07-2007, 04:48 PM

I will take the tach.Do you take paypal.

PT

LUV2XCLR8 · 03-07-2007, 04:59 PM

Nice looking grill, should not last long, wish you were closer

RicksTrucks · 03-07-2007, 05:03 PM

Quote:

Originally Posted by LUV2XCLR8

Nice looking grill, should not last long, wish you were closer

Wish I knew you needed one, I got a few.

**too much stuff** · 03-07-2007, 05:13 PM

Sorry guys, no paypal.
PT, PM sent on the tach...

LUV2XCLR8 · 03-07-2007, 05:13 PM

Quote:

Originally Posted by RicksTrucks

Wish I knew you needed one, I got a few.

Rick, I will keep that in mind, always looking for a clean spare for my wall

Bob Moore · 03-08-2007, 01:21 AM

Could you please take a picture of a hubcap turned over with a tape measure to show the diameter? I have one(?) but don't know if mine is 1/2T or 3/4T.

Sure would appreciate it. Thanks - Bob

**too much stuff** · 03-08-2007, 01:49 AM

Bob, i had this one on file. These caps came off the 8 1/2" wide factory wheels.

Down south truckin · 03-08-2007, 01:50 AM

P/M sent on possible trades! thanks, Mike

Bob Moore · 03-08-2007, 03:10 PM

Thanks - Bob

**too much stuff** · 03-09-2007, 11:56 AM

Sale pending with PT on the tach.
Down south has interest in the tilt.

**too much stuff** · 03-10-2007, 04:10 PM

ttt

**too much stuff** · 03-11-2007, 11:25 PM

Last shot before e-bay or back to storage...

PT'S 70 CST · 03-19-2007, 09:15 PM

M/O was sent out on 3/8 for the tach, let me know when you get it.

Thanks PT

Bob Moore · 03-19-2007, 09:55 PM

What is the best cost to my door on the vac tin? Biz location in Tacoma, WA 98407.

Thanks - Bob

**too much stuff** · 03-19-2007, 10:02 PM

Bob, how about $40? This is a factory stamped one.

Bob Moore · 03-20-2007, 12:36 PM

Let's do it! PM an address and I'll get you paid.

Thanks - Bob

**too much stuff** · 03-26-2007, 08:24 PM

Pic added for bob moore...

03-07-2007, 02:27 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	PARTS: tach, tilt, gate and misc... Hope to start working on a truck this spring so it is time to clean up a little and generate some funds. Vacuum tin. Nice condition. $45 shipped Black steering wheels from 73 and newer are $35 each shipped. Both are nice. Tach cluster with air gauge and 80 pound oil gauge. I buffed the lens and added the correct fuel gauge. This will need a printed circuit. The tach needle moves freely. I do not know what works or what doesn't. Bezel is pretty nice with a crack on the left side where the screw goes in. Tach head has some fading. $225 shipped. Tilt column from a pickup. Shifter feels tight ans so does the tilt mech. It is missing the turn signal parts and someone got into the wiring but patched it. This is the way i bought it. $225 shipped Amp gauge. looks like it should fit in a cluster. Looks nice. $15 shipped GMC tailgate. No rust holes. Very little bow. Does have some small dents on top. Should be a pretty nice gate with paint. $150 NO ship 68 Chevy 3/4 ton hub caps. These go on the wheels with spring clips. Drivers. $35 shipped GMC headlight rings. Will clean up ok. Bigger ding in one of them. Drivers $30 shipped 68 chevy grill with trim. Couple small dings. $175 NO ship Respond in thread, will ship to canada, but will be a little more. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-07-2007, 02:31 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... More pics. I am also looking for NOS woodgrain lower chrome, 69-72 tow hooks, am/fm, and a speedwarning gauge. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-07-2007, 02:33 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Last bunch of pics for now... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-07-2007, 04:48 PM	#4
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: PARTS: tach, tilt, gate and misc... I will take the tach.Do you take paypal. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-07-2007, 04:59 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: PARTS: tach, tilt, gate and misc... Nice looking grill, should not last long, wish you were closer __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-07-2007, 05:13 PM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Sorry guys, no paypal. PT, PM sent on the tach... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-08-2007, 01:21 AM	#9
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... Could you please take a picture of a hubcap turned over with a tape measure to show the diameter? I have one(?) but don't know if mine is 1/2T or 3/4T. Sure would appreciate it. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-08-2007, 01:49 AM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Bob, i had this one on file. These caps came off the 8 1/2" wide factory wheels. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-08-2007, 01:50 AM	#11
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: PARTS: tach, tilt, gate and misc... P/M sent on possible trades! thanks, Mike

03-08-2007, 03:10 PM	#12
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-09-2007, 11:56 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Sale pending with PT on the tach. Down south has interest in the tilt. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-10-2007, 04:10 PM	#14
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... ttt __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-11-2007, 11:25 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Last shot before e-bay or back to storage... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-19-2007, 09:15 PM	#16
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: PARTS: tach, tilt, gate and misc... M/O was sent out on 3/8 for the tach, let me know when you get it. Thanks PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

03-19-2007, 09:55 PM	#17
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... What is the best cost to my door on the vac tin? Biz location in Tacoma, WA 98407. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow



Register or Log In To remove these advertisements.

03-19-2007, 10:02 PM	#18
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Bob, how about $40? This is a factory stamped one. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-20-2007, 12:36 PM	#19
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: PARTS: tach, tilt, gate and misc... Let's do it! PM an address and I'll get you paid. Thanks - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-26-2007, 08:24 PM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: PARTS: tach, tilt, gate and misc... Pic added for bob moore... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.