Coil Spring Frame parts anyone? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5Mike7 · 03-09-2007, 02:18 PM

I have two coil spring frames out back...

One is a 1/2ton cut off behind the front suspension, only real usable stuff left would be trailing arms and crossmember mount for them

Other is a 3/4 ton, looks fairly complete with frontend and rear end still under it.

Going to cut them up for scrap in the next week or so.

Just for pricing..100.00 bucks and less for anything, prefer pickup in Oakdale, Ca.

BACKYARD88 · 03-09-2007, 03:02 PM

I could use the section of frame where the steering box mounts if a 3/4 ton is the same as a 1/2 ton and it was a power steering truck. If you decide to ship that is.

5Mike7 · 03-09-2007, 03:22 PM

No issue to ship, but I wouldn't know if its the same as a 1/2 ton or not...my guess though, it that it shouldn't matter whethre pwr steering or manual steering.

BACKYARD88 · 03-09-2007, 04:02 PM

I think there's an indentation for the p/s box that isn't on the manual frame but I'm not positive. Any way you can get a pic and shoot me a price. SHipping would be to 77327, business address.

5Mike7 · 03-09-2007, 04:28 PM

I'll post one up in a bit.

5Mike7 · 03-09-2007, 04:50 PM

See if this is what you need?

BACKYARD88 · 03-09-2007, 05:04 PM

Looks a little different but It might still work. I'll compare these pics to my frame when I get home in a few hours. Thanks.

shaneschevys · 03-09-2007, 05:45 PM

That bottom frame is a 60-62 truck frame.

BACKYARD88 · 03-09-2007, 05:58 PM

That would explain the difference, I hadn't considered it being the wrong year model. I'll pass, more work than I want to get in to. Thanks 5Mike7. And, thanks for the info. Shane.

5Mike7 · 03-09-2007, 07:19 PM

Quote:

Originally Posted by shaneschevys

That bottom frame is a 60-62 truck frame.

Sure about that? I thought Coil springs didn't come along until '66?

shaneschevys · 03-09-2007, 07:38 PM

They started in 1960. They had a (X) shaped frame in the middle & tortion bar front end instead of front coil springs until 1962. The 63-66 frames are a little different at the front than the 67-72 where the gear box & the bumper mounts

shaneschevys · 03-09-2007, 07:49 PM

Here is a pic of the 68-72 ps frame

5Mike7 · 03-09-2007, 07:54 PM

Quote:

Originally Posted by shaneschevys

They started in 1960. They had a (X) shaped frame in the middle & tortion bar front end instead of front coil springs until 1962. The 63-66 frames are a little different at the front than the 67-72 where the gear box & the bumper mounts

Cool...thanks for the info...I'll go hawk my stuff on the other forum

Sorry to mislead anyone!

5Mike7 · 03-09-2007, 07:58 PM

One other question though...are trailing arms and crossmember the same for 67-up?

03-09-2007, 02:18 PM	#1
5Mike7 Senior Member Join Date: Apr 2005 Location: Oakdale,Ca Posts: 283	Coil Spring Frame parts anyone? I have two coil spring frames out back... One is a 1/2ton cut off behind the front suspension, only real usable stuff left would be trailing arms and crossmember mount for them Other is a 3/4 ton, looks fairly complete with frontend and rear end still under it. Going to cut them up for scrap in the next week or so. Just for pricing..100.00 bucks and less for anything, prefer pickup in Oakdale, Ca. __________________ 55-9 stuff that need a new home http://67-72chevytrucks.com/vboard/s...d.php?t=226133

03-09-2007, 03:02 PM	#2
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Coil Spring Frame parts anyone? I could use the section of frame where the steering box mounts if a 3/4 ton is the same as a 1/2 ton and it was a power steering truck. If you decide to ship that is. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-09-2007, 03:22 PM	#3
5Mike7 Senior Member Join Date: Apr 2005 Location: Oakdale,Ca Posts: 283	Re: Coil Spring Frame parts anyone? No issue to ship, but I wouldn't know if its the same as a 1/2 ton or not...my guess though, it that it shouldn't matter whethre pwr steering or manual steering. __________________ 55-9 stuff that need a new home http://67-72chevytrucks.com/vboard/s...d.php?t=226133

03-09-2007, 04:02 PM	#4
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Coil Spring Frame parts anyone? I think there's an indentation for the p/s box that isn't on the manual frame but I'm not positive. Any way you can get a pic and shoot me a price. SHipping would be to 77327, business address. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-09-2007, 04:28 PM	#5
5Mike7 Senior Member Join Date: Apr 2005 Location: Oakdale,Ca Posts: 283	Re: Coil Spring Frame parts anyone? I'll post one up in a bit. __________________ 55-9 stuff that need a new home http://67-72chevytrucks.com/vboard/s...d.php?t=226133

03-09-2007, 04:50 PM	#6
5Mike7 Senior Member Join Date: Apr 2005 Location: Oakdale,Ca Posts: 283	Re: Coil Spring Frame parts anyone? See if this is what you need? Attached Images __________________ 55-9 stuff that need a new home http://67-72chevytrucks.com/vboard/s...d.php?t=226133

03-09-2007, 05:04 PM	#7
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Coil Spring Frame parts anyone? Looks a little different but It might still work. I'll compare these pics to my frame when I get home in a few hours. Thanks. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-09-2007, 05:45 PM	#8
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Coil Spring Frame parts anyone? That bottom frame is a 60-62 truck frame. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

03-09-2007, 05:58 PM	#9
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Coil Spring Frame parts anyone? That would explain the difference, I hadn't considered it being the wrong year model. I'll pass, more work than I want to get in to. Thanks 5Mike7. And, thanks for the info. Shane. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

03-09-2007, 07:38 PM	#11
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Coil Spring Frame parts anyone? They started in 1960. They had a (X) shaped frame in the middle & tortion bar front end instead of front coil springs until 1962. The 63-66 frames are a little different at the front than the 67-72 where the gear box & the bumper mounts __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

03-09-2007, 07:49 PM	#12
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: Coil Spring Frame parts anyone? Here is a pic of the 68-72 ps frame Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

03-09-2007, 07:58 PM	#14
5Mike7 Senior Member Join Date: Apr 2005 Location: Oakdale,Ca Posts: 283	Re: Coil Spring Frame parts anyone? One other question though...are trailing arms and crossmember the same for 67-up? __________________ 55-9 stuff that need a new home http://67-72chevytrucks.com/vboard/s...d.php?t=226133



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.