whats it worth?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1lowdiesel · 03-09-2007, 02:19 PM

a buddy of mine has this sitting in his yard and he told me to make him an offer. looks real clean but i havn't seen it in person yet.

Frizzle Fry · 03-09-2007, 03:25 PM

If it's as rust free as it appears to be and looks the same on the other side I'd pay up to $1000 for the rolling chassis/body (assuming no motor)

bagged91 · 03-09-2007, 03:33 PM

Hmmm... That wouldn't be Mansons would it??

1lowdiesel · 03-09-2007, 03:36 PM

i thinkit was manson's old one but i'm not sure. who is this??

bagged91 · 03-09-2007, 04:01 PM

I saw your CCSB at a few shows last year. You might know me from my truck. I sold this about 2 years ago, never got a chance to finish it... My ex & I were splitting up... Oh, incase you were wondering, measured 1 5/8 to the bottom of the door.

L8R - Joe

70rs/ss · 03-09-2007, 04:02 PM

$200-500, yeah the body is OK, but the glass, and lack of stuff makes it a rolling parts car. For a grand I can buy one and drive it home, with little of no rust. Instead of looking at the condition of the metal look at the stuff that is lacking, and the time and money it'll take to fix it. Heck buy one from az and pay to have it delivered and you'll still be money ahead.

bagged91 · 03-09-2007, 04:18 PM

Took a while to find them but here is what I bought for $200 4 years ago... I know of a complete roller for about $500 and a few others around too. I would have a hard time going over $500 for it, providing it has a good, clear title and the rot isn't too bad on it... Check the floor under the rear seat, up where it meets the wood floor. They LOVE to rot there and along where the "4th" door would be...

Frizzle Fry · 03-09-2007, 04:45 PM

The question is; is there any rot or just minor surface stuff? I'd pay a grand for a solid body/frame with little-to-no rust repair needed. But I do live in Oregon, not Arizona... It looks like it's someone's abandoned project so it really depends on how much has already been done and how well, as well as what parts are coming with it.

1lowdiesel · 03-09-2007, 05:25 PM

yea i remember seeing that truck joe and damn that burban looked like a hell of a good deal.

bagged91 · 03-09-2007, 07:05 PM

If you decide to pass & he is willing to part it out, I could use the barn doors from the rear

Maybe the pass front door too if it is rust free. Maybe an even up swap for a tailgate/liftgate setup if the barn doors are real nice...

lutherb69 · 03-09-2007, 11:00 PM

I would say 300 to 500

milehightoyz · 03-10-2007, 10:16 PM

id give $300 for it if he put the taillights back in it....

**special-K** · 03-11-2007, 06:51 AM

Isn`t that "Ye Ole Rust in the Quarters" I see?Not doin`it any good letting water in to soak the floor and backsides of the sheetmetal.Tail light area all cobbled-up?Prolly rust there,too.Personally I`d start with something better.But,I`d roll it off for him and maybe had over a couple hundred if it`s got some decent parts.I`m sure the interior panels are shot.

seth 69 sub · 03-13-2007, 08:32 AM

u will probley make more parting it out then selling it hole if u do part it out i would like the driverside quarter panel mine is in bad shape bought my sub for 1500 and drove it home and it is my daily driver an i need drivers door f posable

bagged91 · 03-13-2007, 04:04 PM

seth 69 sub...

Welcome to the board! Noticed your from KS. Have to be honest with you, you will be better off looking for doors,ect in KS than from NJ. I have a set of KS doors on my 71 burb and they are sweet. My NJ doors you can put your fist thru the bottom. On the 1/4 panel, if it's not too bad, use a SWB or blazer bedside for the wheel arch, the rear section is reproduced and the front section is easy to fab...

03-09-2007, 02:19 PM	#1
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	whats it worth?? a buddy of mine has this sitting in his yard and he told me to make him an offer. looks real clean but i havn't seen it in person yet. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-09-2007, 03:25 PM	#2
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: whats it worth?? If it's as rust free as it appears to be and looks the same on the other side I'd pay up to $1000 for the rolling chassis/body (assuming no motor)

03-09-2007, 03:33 PM	#3
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: whats it worth?? Hmmm... That wouldn't be Mansons would it?? __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-09-2007, 03:36 PM	#4
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: whats it worth?? i thinkit was manson's old one but i'm not sure. who is this?? __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-09-2007, 04:01 PM	#5
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: whats it worth?? I saw your CCSB at a few shows last year. You might know me from my truck. I sold this about 2 years ago, never got a chance to finish it... My ex & I were splitting up... Oh, incase you were wondering, measured 1 5/8 to the bottom of the door. L8R - Joe Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" Last edited by bagged91; 03-09-2007 at 04:04 PM.

03-09-2007, 04:02 PM	#6
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: whats it worth?? $200-500, yeah the body is OK, but the glass, and lack of stuff makes it a rolling parts car. For a grand I can buy one and drive it home, with little of no rust. Instead of looking at the condition of the metal look at the stuff that is lacking, and the time and money it'll take to fix it. Heck buy one from az and pay to have it delivered and you'll still be money ahead.

03-09-2007, 04:18 PM	#7
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: whats it worth?? Took a while to find them but here is what I bought for $200 4 years ago... I know of a complete roller for about $500 and a few others around too. I would have a hard time going over $500 for it, providing it has a good, clear title and the rot isn't too bad on it... Check the floor under the rear seat, up where it meets the wood floor. They LOVE to rot there and along where the "4th" door would be... Attached Images __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-09-2007, 04:45 PM	#8
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: whats it worth?? The question is; is there any rot or just minor surface stuff? I'd pay a grand for a solid body/frame with little-to-no rust repair needed. But I do live in Oregon, not Arizona... It looks like it's someone's abandoned project so it really depends on how much has already been done and how well, as well as what parts are coming with it.

03-09-2007, 05:25 PM	#9
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: whats it worth?? yea i remember seeing that truck joe and damn that burban looked like a hell of a good deal. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-09-2007, 07:05 PM	#10
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: whats it worth?? If you decide to pass & he is willing to part it out, I could use the barn doors from the rear Maybe the pass front door too if it is rust free. Maybe an even up swap for a tailgate/liftgate setup if the barn doors are real nice... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"

03-09-2007, 11:00 PM	#11
lutherb69 Registered User Join Date: Oct 2005 Location: Langley AFB, Va (Army) Posts: 124	Re: whats it worth?? I would say 300 to 500

03-10-2007, 10:16 PM	#12
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	Re: whats it worth?? id give $300 for it if he put the taillights back in it....

03-11-2007, 06:51 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: whats it worth?? Isn`t that "Ye Ole Rust in the Quarters" I see?Not doin`it any good letting water in to soak the floor and backsides of the sheetmetal.Tail light area all cobbled-up?Prolly rust there,too.Personally I`d start with something better.But,I`d roll it off for him and maybe had over a couple hundred if it`s got some decent parts.I`m sure the interior panels are shot. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-13-2007, 08:32 AM	#14
seth 69 sub Registered User Join Date: Feb 2007 Location: wichita ks Posts: 10	Re: whats it worth?? u will probley make more parting it out then selling it hole if u do part it out i would like the driverside quarter panel mine is in bad shape bought my sub for 1500 and drove it home and it is my daily driver an i need drivers door f posable Last edited by seth 69 sub; 03-13-2007 at 08:34 AM. Reason: to and something

03-13-2007, 04:04 PM	#15
bagged91 Out draggin' Join Date: Jan 2004 Location: Pitman,NJ Posts: 1,574	Re: whats it worth?? seth 69 sub... Welcome to the board! Noticed your from KS. Have to be honest with you, you will be better off looking for doors,ect in KS than from NJ. I have a set of KS doors on my 71 burb and they are sweet. My NJ doors you can put your fist thru the bottom. On the 1/4 panel, if it's not too bad, use a SWB or blazer bedside for the wheel arch, the rear section is reproduced and the front section is easy to fab... __________________ 91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.