My new goodies - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1LoC10 · 03-09-2007, 03:50 PM

hopefully this will wake up the ol 350, coming from a points dizzy and a tired old 2 bbl

sb69chevy · 03-09-2007, 03:58 PM

Looks very nice.

RACINJASON22 · 03-09-2007, 05:07 PM

Looks likes ya had a birthday! Cool

shaneschevys · 03-09-2007, 05:22 PM

Nice. Weekend project?

1LoC10 · 03-09-2007, 05:31 PM

Quote:

Originally Posted by shaneschevys

Nice. Weekend project?

if it goes well, it should be

whatnow123 · 03-09-2007, 06:16 PM

Got to love new parts!

I don't know if all V8 trucks have dual exhaust or not, but if your truck has a single exhaust because of the 2 barrel, you are going to end up with little to no benefit from adding these parts. We added a 4 barrel carb and manifold to a buddy's Camaro in high school and it ran worse, hacked off the single exhaust, added headers with a dual exhaust system and you wouldn't even had thought it was the same engine.

Just my 2 cents. (nice parts!!)

1LoC10 · 03-09-2007, 06:19 PM

it has ram horns with straight pipes dumping out of glasspacks...... but plans are block huggers, an H pipe and flowmaster 40's down the road

ChevyDude · 03-09-2007, 09:19 PM

SUPER NICE!!! That looks like a great fun bling bling day!!!

1LoC10 · 03-12-2007, 10:50 AM

Heres some progress pics

Spray-Bomb · 03-12-2007, 11:05 AM

Cool !

I dun see no pics

**Yukon Jack** · 03-12-2007, 11:17 AM

Looks like a great purchase. Let us know on the results.

RACINJASON22 · 03-12-2007, 02:02 PM

1LoC10 did the parts make it on over the weekend. your pics didn't show up on your last post here. RJ22

1LoC10 · 03-12-2007, 02:36 PM

No, weekend turned into Sunday night, and that turned into Monday morning, but im off today... heres the pics I tried to post... nothing special, but hopefully done tonight or tommorow

bobthecop · 03-12-2007, 02:48 PM

Looking good

RACINJASON22 · 03-12-2007, 04:03 PM

I know what ya mean. I never get to do thing as I plan to something always seems to come up.

1LoC10 · 03-12-2007, 05:15 PM

Well I took one pic and the battery went dead...lol

1LoC10 · 03-13-2007, 12:33 AM

Night went ok, but still not done, to many trips back and forth to part store..lol but got the HEI sitted in and pulled all the old plugs, they were all nasty and gapped everywhere from 35 to 60!, got all new R45TS plugs gapped em all at 45 and got them in... not much progress, but still a long day

Spray-Bomb · 03-13-2007, 12:37 AM

What exact parts did you get

Is the mani a stealth ?

Dizzy model ?

Plug wires are sweet look'n, what are they ?

1LoC10 · 03-13-2007, 12:47 AM

Dizzy: is a Mallory 8548201C
Wires: are Accel Armor Shield Braided 8002B
Manifold: is a Summit Stage 1.. 226008
Carb: is an Edelbrock 600cfm 1405

GREASEMONKEY72 · 03-13-2007, 01:25 AM

looks good, cant wait to see it on there, i love those plug wires

nvrforgotten52 · 03-13-2007, 01:03 PM

ive got the same ignition and the same carb and my truck runs great. its got plenty of power! and i can get 16 mpg on the freeway with that carb... 700r4 though

Sonny · 03-13-2007, 01:41 PM

Don't forget to bypass/replace the resistor wire. It has been a while and I am probably mistaken but you can ditch the wire that runs from the starter to the distributor too. You just need to get switched 12v power (even when cranking) to the dizzy and you will be good to go. The PO on my truck used the resistor wire to power the distributor and I kept having ignition problems. I am sure someone will correct me if I m wrong and fill in anything I missed.

Take your time and make sure you make good electrical connections because they can be very hard to troubleshoot if you run into any problems.

Sonny

Slammed70 · 03-13-2007, 01:49 PM

Wow, those Taylor wires are sexy and they match the rest of the plumbing on my engine.

1LoC10 · 03-13-2007, 09:10 PM

Can I use the 12 volt wire that went to my coil? or do I need a whole new wire?

and I am at a stand still with the fuel line, so not much progress today

1LoC10 · 03-13-2007, 09:22 PM

last two

03-09-2007, 03:50 PM	#1
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	My new goodies hopefully this will wake up the ol 350, coming from a points dizzy and a tired old 2 bbl Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-09-2007, 03:58 PM	#2
sb69chevy Registered User Join Date: Oct 2006 Location: Springfield, MO Posts: 375	Re: My new goodies Looks very nice. __________________ 1969 C/10 swb, 350, powerglide (daily driver) 2005 CRV (wife's ride)

03-09-2007, 05:07 PM	#3
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: My new goodies Looks likes ya had a birthday! Cool __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

03-09-2007, 05:22 PM	#4
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: My new goodies Nice. Weekend project? __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

03-09-2007, 06:16 PM	#6
whatnow123 Registered User Join Date: Oct 2006 Location: Arizona Posts: 835	Re: My new goodies Got to love new parts! I don't know if all V8 trucks have dual exhaust or not, but if your truck has a single exhaust because of the 2 barrel, you are going to end up with little to no benefit from adding these parts. We added a 4 barrel carb and manifold to a buddy's Camaro in high school and it ran worse, hacked off the single exhaust, added headers with a dual exhaust system and you wouldn't even had thought it was the same engine. Just my 2 cents. (nice parts!!) __________________ 67 Short Step, 355, 700R 4.11 posi rear, 4/6 drop Discs on all 4 corners. Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=219094

03-09-2007, 06:19 PM	#7
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies it has ram horns with straight pipes dumping out of glasspacks...... but plans are block huggers, an H pipe and flowmaster 40's down the road __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-09-2007, 09:19 PM	#8
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: My new goodies SUPER NICE!!! That looks like a great fun bling bling day!!! __________________ Alex 1971 Lil' Red 350 SBC 700R4

03-12-2007, 10:50 AM	#9
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies Heres some progress pics __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-12-2007, 11:05 AM	#10
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: My new goodies Cool ! I dun see no pics __________________ Just not low enough... ----------------------------- Sinister Killer Last edited by Spray-Bomb; 03-12-2007 at 11:07 AM.

03-12-2007, 11:17 AM	#11
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: My new goodies Looks like a great purchase. Let us know on the results. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-12-2007, 02:02 PM	#12
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: My new goodies 1LoC10 did the parts make it on over the weekend. your pics didn't show up on your last post here. RJ22 __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

03-12-2007, 02:36 PM	#13
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies No, weekend turned into Sunday night, and that turned into Monday morning, but im off today... heres the pics I tried to post... nothing special, but hopefully done tonight or tommorow Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-12-2007, 02:48 PM	#14
bobthecop Senior Member Join Date: Nov 2006 Location: Yukon Oklahoma Posts: 2,647	Re: My new goodies Looking good __________________ Happiness is towing your "new" truck home. 1972 C-10 1982 GMC (parts truck??) 1969 c10 parts truck 1969 C-10 ( my sons) 1992 Silverado 4X4 (now the boys truck)(now mine again) 2002 Tarus (my wife loves that car)

03-12-2007, 04:03 PM	#15
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: My new goodies I know what ya mean. I never get to do thing as I plan to something always seems to come up. __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

03-12-2007, 05:15 PM	#16
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies Well I took one pic and the battery went dead...lol Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<



Register or Log In To remove these advertisements.

03-13-2007, 12:33 AM	#17
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies Night went ok, but still not done, to many trips back and forth to part store..lol but got the HEI sitted in and pulled all the old plugs, they were all nasty and gapped everywhere from 35 to 60!, got all new R45TS plugs gapped em all at 45 and got them in... not much progress, but still a long day Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-13-2007, 12:37 AM	#18
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: My new goodies What exact parts did you get Is the mani a stealth ? Dizzy model ? Plug wires are sweet look'n, what are they ? __________________ Just not low enough... ----------------------------- Sinister Killer

03-13-2007, 12:47 AM	#19
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies Dizzy: is a Mallory 8548201C Wires: are Accel Armor Shield Braided 8002B Manifold: is a Summit Stage 1.. 226008 Carb: is an Edelbrock 600cfm 1405 __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-13-2007, 01:25 AM	#20
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: My new goodies looks good, cant wait to see it on there, i love those plug wires __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

03-13-2007, 01:03 PM	#21
nvrforgotten52 Registered User Join Date: Jan 2006 Location: Morro Bay C.A Posts: 179	Re: My new goodies ive got the same ignition and the same carb and my truck runs great. its got plenty of power! and i can get 16 mpg on the freeway with that carb... 700r4 though __________________ '69 C10 SWB 350 edelbrock int/carb .420 .442 cam 700r4 70 lwb c10 work truck 250 I6 with two inch lift springs and a two inch bodylift and 33/12.5s

03-13-2007, 01:41 PM	#22
Sonny Active Member Join Date: Jan 2004 Location: Centerville, GA Posts: 240	Re: My new goodies Don't forget to bypass/replace the resistor wire. It has been a while and I am probably mistaken but you can ditch the wire that runs from the starter to the distributor too. You just need to get switched 12v power (even when cranking) to the dizzy and you will be good to go. The PO on my truck used the resistor wire to power the distributor and I kept having ignition problems. I am sure someone will correct me if I m wrong and fill in anything I missed. Take your time and make sure you make good electrical connections because they can be very hard to troubleshoot if you run into any problems. Sonny

03-13-2007, 09:10 PM	#24
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies Can I use the 12 volt wire that went to my coil? or do I need a whole new wire? and I am at a stand still with the fuel line, so not much progress today Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-13-2007, 09:22 PM	#25
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: My new goodies last two Attached Images __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

Register or Log In To remove these advertisements.