03-15-2007, 09:08 AM | #1 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
wiring harness
Complete under dash and engine wiring harness. Only wires cut are the two at the ignition coil. From 1972 c-20 no a/c. Includes the cig. lighter wire (it has a splice in it, but both ends are intact) and the fuel sender wire, and the interior dome light harness. $50+shipping
Attachment 250547 Attachment 250548 Attachment 250549
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:52 PM. |
03-15-2007, 10:43 AM | #2 |
Registered User
Join Date: Dec 2006
Location: North Carolina
Posts: 308
|
Re: wiring harness
Were the coil wires cut off due to hei conversion or just during removal. Was this harness in working condition or was it just from a parts truck. can I get a pic of the harness.
__________________
1985 1500 454, 4l80e, 12 bolt, 5/6 drop, 20s |
03-15-2007, 11:01 AM | #3 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: wiring harness
The truck ran when I got it, and had no electrical issues. The coil terminals were cut because the posts in the coil were spinning. I will post pics this afternoon.
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 03-15-2007 at 11:02 AM. |
03-15-2007, 01:51 PM | #4 |
Registered User
Join Date: Dec 2006
Location: North Carolina
Posts: 308
|
Re: wiring harness
How much would shipping be to 28079 and do you take paypal?
One last question is there a differance between to harnesses for the 3 gauge cluster vs. the 7 gauge cluster?
__________________
1985 1500 454, 4l80e, 12 bolt, 5/6 drop, 20s Last edited by Rascal_one2001; 03-15-2007 at 02:24 PM. |
03-15-2007, 04:24 PM | #5 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: wiring harness
This is for the gauge package (7 hole dash).Shipping is $8 parcel post or $9.50 priority. Paypal is bob.alexander@clearviewcatv.net
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
03-15-2007, 06:35 PM | #6 |
Like a Rock!
Join Date: May 2002
Location: USA
Posts: 1,092
|
Re: wiring harness
GMC Paul has a tech tep on his site showing how to convert from a non gauge dash to a dash gauge. So I would think the harness could easily made to work with either setup. The connectors alone would cost at least $50 .
__________________
69 LWB Runs great - work in progress Mess with me and you mess with the whole trailer park! |
03-15-2007, 10:06 PM | #7 |
Registered User
Join Date: Dec 2006
Location: North Carolina
Posts: 308
|
Re: wiring harness
Paypal sent
__________________
1985 1500 454, 4l80e, 12 bolt, 5/6 drop, 20s |
03-15-2007, 10:35 PM | #8 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: wiring harness
Thanks! Will ship priority tomorrow!!!!
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
Bookmarks |
|
|