1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72freak · 03-17-2007, 11:18 AM

Various parts available from this truck. I took the engine, tranny, driveshaft, exhaust and wiring harness for another project. It drove down the road great before I stripped it. It is a northern truck so the body and frame is rusted pretty bad. The truck had 140K on it when I took it apart

I prefer to sell the truck as a whole but I will part it out. Contact me for prices.

Things available;

Complete vehicle with OPEN TITLE
Tilt wheel with keys
Good front and rear bumpers with brackest
Grille
Complete suspension
Front and middle seats (blue vinyl)
All glass is good (no tint)
Good rear end (ratio unknown but its a highway gear)
Guage cluster
Cracked dash pad
Heat and AC control
Manual door locks and window controls
Working rear tailgate with glass and motor.
Class 3 hitch
Good fuel tank and fuel pump (It was working)

NO SHIPPING.....come get it if you want it.
Most parts are on the truck and will need to be romoved by buyer. I have a place and equipment to raise the truck if suspention parts are wanted

wildmanaaron · 03-20-2007, 09:01 PM

Would you consider cutting the ends of the rear of the frame? All I need is around 5-6" from the rear towards the front.

toddtime · 03-20-2007, 09:39 PM

I would like the rear bumper brackets. PM me a price, Thanks!

toddtime · 03-20-2007, 09:41 PM

N/M just saw the "no shipping"

Kurt L · 03-26-2007, 08:38 PM

wood grain dash bezel?

roughedup72 · 03-31-2007, 10:13 AM

How much for the tilt with keys. pm me or you can email me at twchapman@bellsouth.net

cstm68 · 04-10-2007, 07:21 PM

do you have the hood release cable
please pm me

72freak · 04-10-2007, 10:45 PM

I have PM'd all of you...............sorry for the delay

yes.......there is a hood release
yes.......I will cut the frame
$100..... for tilt with keys

and yes......I will ship the stuff if need be.

**N2TRUX** · 04-11-2007, 09:48 AM

Please post prices per forum rules-Look here

72freak · 06-12-2007, 02:02 PM

someone come get this thing..........make me an offer!!!!!!!!!!

toddtime · 06-13-2007, 01:33 AM

I'll give you $30 shipped for all bracketery with nuts and bolts for the rear bumper.

72freak · 06-13-2007, 09:47 AM

Quote:

Originally Posted by toddtime

I'll give you $30 shipped for all bracketery with nuts and bolts for the rear bumper.

Thanks for the offer........... but its not worth the $10 or so dollars I might make after shipping to lay down there and take it all off. If someone buys the bumper and I have to take it all off I will contact you.

Thanks for your interest

72freak · 06-25-2007, 07:32 PM

This thing is going to be scrapped when i get home from vacation.......

speak now

BIGCHEVYMAN · 06-26-2007, 04:35 PM

how much for the whole thing or the bumpers and core support?

72freak · 06-26-2007, 07:26 PM

Quote:

Originally Posted by BIGCHEVYMAN

how much for the whole thing or the bumpers and core support?

$250 for the whole thing

72freak · 07-03-2007, 06:00 PM

ttt

03-17-2007, 11:18 AM	#1
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS Various parts available from this truck. I took the engine, tranny, driveshaft, exhaust and wiring harness for another project. It drove down the road great before I stripped it. It is a northern truck so the body and frame is rusted pretty bad. The truck had 140K on it when I took it apart I prefer to sell the truck as a whole but I will part it out. Contact me for prices. Things available; Complete vehicle with OPEN TITLE Tilt wheel with keys Good front and rear bumpers with brackest Grille Complete suspension Front and middle seats (blue vinyl) All glass is good (no tint) Good rear end (ratio unknown but its a highway gear) Guage cluster Cracked dash pad Heat and AC control Manual door locks and window controls Working rear tailgate with glass and motor. Class 3 hitch Good fuel tank and fuel pump (It was working) NO SHIPPING.....come get it if you want it. Most parts are on the truck and will need to be romoved by buyer. I have a place and equipment to raise the truck if suspention parts are wanted Attached Images Last edited by 72freak; 03-17-2007 at 04:06 PM.

03-20-2007, 09:01 PM	#2
wildmanaaron Registered User Join Date: Mar 2002 Location: Bowling Green, KY Posts: 396	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS Would you consider cutting the ends of the rear of the frame? All I need is around 5-6" from the rear towards the front.

03-20-2007, 09:39 PM	#3
toddtime Registered User Join Date: Sep 2006 Location: TN Posts: 25	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS I would like the rear bumper brackets. PM me a price, Thanks!

03-20-2007, 09:41 PM	#4
toddtime Registered User Join Date: Sep 2006 Location: TN Posts: 25	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS N/M just saw the "no shipping"

03-26-2007, 08:38 PM	#5
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS wood grain dash bezel?

03-31-2007, 10:13 AM	#6
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS How much for the tilt with keys. pm me or you can email me at twchapman@bellsouth.net __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

04-10-2007, 07:21 PM	#7
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS do you have the hood release cable please pm me __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

04-10-2007, 10:45 PM	#8
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS I have PM'd all of you...............sorry for the delay yes.......there is a hood release yes.......I will cut the frame $100..... for tilt with keys and yes......I will ship the stuff if need be.

04-11-2007, 09:48 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS Please post prices per forum rules-Look here __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

06-12-2007, 02:02 PM	#10
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS someone come get this thing..........make me an offer!!!!!!!!!!

06-13-2007, 01:33 AM	#11
toddtime Registered User Join Date: Sep 2006 Location: TN Posts: 25	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS I'll give you $30 shipped for all bracketery with nuts and bolts for the rear bumper.

06-25-2007, 07:32 PM	#13
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS This thing is going to be scrapped when i get home from vacation....... speak now

06-26-2007, 04:35 PM	#14
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS how much for the whole thing or the bumpers and core support?

07-03-2007, 06:00 PM	#16
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1989 Chevrolet, 1/2 ton, 2x4, Suburban FOR PARTS ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.