1972 GMC Short Fleet AC tilt big block truck for parts with title. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72freak · 03-19-2007, 04:26 PM

Not much left but it might be worth something to someone who wants to build an original big block truck with a title. originally the Ochra and white

1972 GMC short bed. Factory big block turbo 400 truck. (No engine or tranny)
Only bed floor and wheel wells remain,,floor pitted and a couple of small holes.
Original glove box door with build sheet
Power disc brakes with 5 lug
Rear end still in truck...ratio unknown
Build sheet says AM-FM radio..........long gone.
Power steering pump, box, brackets and hoses are still there.
Factory working tilt wheel is still in it.
AC box vents and controller still there.
Gas tank
Front grill support
Dual exhaust with chrome tips still under it with small block manifolds.
Rust in rockers, corners and floor and door bottoms.
Tinted rear sliding window
Original bench seat with rails
Dash has been cut
I have 2 fenders and one is the original
Original hood has some damage but can be repaired.
Driver quality front bumper
Comes with OPEN TITLE.

DOES NOT COME WITH THE WHEELS OR TIRES .

I was planning to take what I wanted from it and part the rest out.....but I thought before it got molested anymore I would see if someone on the board wanted to try to save it....It was definatly a nice piece in its day..
I know the value of the remaining parts so I am setting the price below that.

$900 OBO

I AM NOT READY TO PART IT OUT SO PLEASE DONT ASK.....THIS AD IF FOR THE WHOLE TRUCK. IF IT DOES NOT SELL I WILL START TO LIST PARTS BY MID SUMMER.

deer slayer · 03-19-2007, 06:02 PM

how much for all a/c stuff and the firewall cut and the complete dash do have the brackets and pulleys
thanks jeff

deer slayer · 03-19-2007, 06:02 PM

sorry missed the whole not parting

qksilver · 03-19-2007, 08:40 PM

interested but need to know about the fenders and core support. Can I get some pix?
SCJKOVACH@AOL.COM
Thanks,
Steve

**uncle** · 03-20-2007, 08:35 PM

PM sent.

qksilver · 03-20-2007, 09:14 PM

I will pass...........thanks for letting me know condition. If it had a decent core support and fenders I could do it. I already have a super cheyenne cab.
Thanks,
Steve

72freak · 06-25-2007, 07:29 PM

ttt

Sadsack · 06-25-2007, 07:39 PM

I figured Id better get in line in case your truck doesnt sale...which I hope it does! Id be interested in the tilt column if you sale it. Hope its ok to ask...dont want to make you mad but Im dying for one in my truck and didnt want to be the second one to ask! LOL My steering wheel is touching the tops of my legs! Good luck selling the beast...if I lived closer Id be interested!

72freak · 06-25-2007, 08:18 PM

Quote:

Originally Posted by Sadsack

I figured Id better get in line in case your truck doesnt sale...which I hope it does! Id be interested in the tilt column if you sale it. Hope its ok to ask...dont want to make you mad but Im dying for one in my truck and didnt want to be the second one to ask! LOL My steering wheel is touching the tops of my legs! Good luck selling the beast...if I lived closer Id be interested!

Thats one of the parts I will be keeping if i do part it out. I have MANY trucks I can use it in.

DMARCUM123 · 06-25-2007, 09:20 PM

hmmmmmm papers woud be ok to have

72freak · 06-26-2007, 05:22 AM

Quote:

Originally Posted by DMARCUM123

hmmmmmm papers woud be ok to have

what kind od papers are you looking for?

cnshoot · 06-26-2007, 09:10 PM

intrest, can you send me a better pic of options plate and some more pics of what is left thanks cnshoot@msn.com

72freak · 07-03-2007, 06:03 PM

new pics will be posted and sent on Wed.

Thanks

cnshoot · 07-03-2007, 07:40 PM

wont get them until i get back on the 12th

meathead95 · 07-04-2007, 07:31 AM

is the floor wavy at all?

72freak · 07-04-2007, 05:28 PM

Quote:

Originally Posted by meathead95

is the floor wavy at all?

not sure what you mean?????

bed floor, cab floor.........wavy how>

meathead95 · 07-05-2007, 08:40 AM

the bed floor is it wavy? you've never seen a wavy bed floor?

72freak · 07-05-2007, 06:19 PM

Quote:

Originally Posted by meathead95

the bed floor is it wavy? you've never seen a wavy bed floor?

Nope...........never seen a wavy floor.........this one looks good........just some pitting

meathead95 · 07-06-2007, 09:23 AM

wow, i cant bleieve you havent seen a wavy floor. lol.............thats pretty wild. i bet i have had atleast a dozen of them that looked like wash boards got anything you need to maybe do some trading to bring the price down or maybe just sell the floor seperate

Crank · 07-06-2007, 11:34 AM

Can you post some better pictures of the cab, rocker areas and any areas of concern? As well as where the dash has been cut... Will it at least have roller wheels and tires on it? Thanks
Brandon

72freak · 07-06-2007, 03:26 PM

Quote:

Originally Posted by meathead95

wow, i cant bleieve you havent seen a wavy floor. lol.............thats pretty wild. i bet i have had atleast a dozen of them that looked like wash boards got anything you need to maybe do some trading to bring the price down or maybe just sell the floor seperate

What you want to trade?

72freak · 07-06-2007, 03:27 PM

Quote:

Originally Posted by Crank

Any way you can post some better pictures of the cab, rocker areas and any areas of concern? As well as where the dash has been cut... Will it at least have roller wheels and tires on it? Thanks
Brandon

for full price I do have some wagon wheells and tires that can be put on it.

I will take some pictures tomorrow.

Dash is cut for a newer style radio.........

If it was me I woud swap the cab to a better one but its better than some Northern ones Ive seen people start off with!!!!

72freak · 07-06-2007, 06:22 PM

Here are some more pictures.....I am not able to get a good clear shot of the glove box built sheet but if anyone needs I will give you the additional specs by typing them out. I think between these pictures, the ones above and the written description I have described/displayed the item for sale about as best I can with what I have.
thaks for your interest.

72freak · 07-06-2007, 06:24 PM

I have some rwagon wheels and old tires that can be installed if full price is offered.
The truck also has a good windsheild and a bed/cab light.
The rockers/cab corners are about the same on both sides

72freak · 07-11-2007, 07:04 PM

ttt

03-19-2007, 04:26 PM	#1
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	1972 GMC Short Fleet AC tilt big block truck for parts with title. Not much left but it might be worth something to someone who wants to build an original big block truck with a title. originally the Ochra and white 1972 GMC short bed. Factory big block turbo 400 truck. (No engine or tranny) Only bed floor and wheel wells remain,,floor pitted and a couple of small holes. Original glove box door with build sheet Power disc brakes with 5 lug Rear end still in truck...ratio unknown Build sheet says AM-FM radio..........long gone. Power steering pump, box, brackets and hoses are still there. Factory working tilt wheel is still in it. AC box vents and controller still there. Gas tank Front grill support Dual exhaust with chrome tips still under it with small block manifolds. Rust in rockers, corners and floor and door bottoms. Tinted rear sliding window Original bench seat with rails Dash has been cut I have 2 fenders and one is the original Original hood has some damage but can be repaired. Driver quality front bumper Comes with OPEN TITLE. DOES NOT COME WITH THE WHEELS OR TIRES . I was planning to take what I wanted from it and part the rest out.....but I thought before it got molested anymore I would see if someone on the board wanted to try to save it....It was definatly a nice piece in its day.. I know the value of the remaining parts so I am setting the price below that. $900 OBO I AM NOT READY TO PART IT OUT SO PLEASE DONT ASK.....THIS AD IF FOR THE WHOLE TRUCK. IF IT DOES NOT SELL I WILL START TO LIST PARTS BY MID SUMMER. Attached Images Last edited by 72freak; 07-15-2007 at 07:45 AM.

03-19-2007, 06:02 PM	#2
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. how much for all a/c stuff and the firewall cut and the complete dash do have the brackets and pulleys thanks jeff

03-19-2007, 06:02 PM	#3
deer slayer Registered User Join Date: Jun 2006 Location: fl Posts: 274	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. sorry missed the whole not parting

03-19-2007, 08:40 PM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. interested but need to know about the fenders and core support. Can I get some pix? SCJKOVACH@AOL.COM Thanks, Steve

03-20-2007, 08:35 PM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. PM sent.

03-20-2007, 09:14 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. I will pass...........thanks for letting me know condition. If it had a decent core support and fenders I could do it. I already have a super cheyenne cab. Thanks, Steve

06-25-2007, 07:29 PM	#7
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. ttt

06-25-2007, 07:39 PM	#8
Sadsack Registered User Join Date: May 2007 Location: East TN Posts: 171	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. I figured Id better get in line in case your truck doesnt sale...which I hope it does! Id be interested in the tilt column if you sale it. Hope its ok to ask...dont want to make you mad but Im dying for one in my truck and didnt want to be the second one to ask! LOL My steering wheel is touching the tops of my legs! Good luck selling the beast...if I lived closer Id be interested!

06-25-2007, 09:20 PM	#10
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. hmmmmmm papers woud be ok to have

06-26-2007, 09:10 PM	#12
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. intrest, can you send me a better pic of options plate and some more pics of what is left thanks cnshoot@msn.com __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

07-03-2007, 06:03 PM	#13
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. new pics will be posted and sent on Wed. Thanks

07-03-2007, 07:40 PM	#14
cnshoot Registered User Join Date: Jan 2003 Location: minden Posts: 358	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. wont get them until i get back on the 12th __________________ 72 cst 2wd blazer sb soon to have tilt manual 72 gmc swb fleet 2wd bb air tilt auto 93 c/3500 crew-cab dually 03 chevy suburban LT quadrasteer c/2500 4x4

07-04-2007, 07:31 AM	#15
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. is the floor wavy at all? __________________ 72 2wd blazer 72 swb 4x4

07-05-2007, 08:40 AM	#17
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. the bed floor is it wavy? you've never seen a wavy bed floor? __________________ 72 2wd blazer 72 swb 4x4

07-06-2007, 09:23 AM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. wow, i cant bleieve you havent seen a wavy floor. lol.............thats pretty wild. i bet i have had atleast a dozen of them that looked like wash boards got anything you need to maybe do some trading to bring the price down or maybe just sell the floor seperate __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

07-06-2007, 11:34 AM	#20
Crank Registered User Join Date: Aug 2002 Location: Crittenden, KY Posts: 1,964	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. Can you post some better pictures of the cab, rocker areas and any areas of concern? As well as where the dash has been cut... Will it at least have roller wheels and tires on it? Thanks Brandon Last edited by Crank; 07-06-2007 at 04:56 PM.

07-06-2007, 06:22 PM	#23
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. Here are some more pictures.....I am not able to get a good clear shot of the glove box built sheet but if anyone needs I will give you the additional specs by typing them out. I think between these pictures, the ones above and the written description I have described/displayed the item for sale about as best I can with what I have. thaks for your interest. Attached Images

07-06-2007, 06:24 PM	#24
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. I have some rwagon wheels and old tires that can be installed if full price is offered. The truck also has a good windsheild and a bed/cab light. The rockers/cab corners are about the same on both sides Attached Images Last edited by 72freak; 07-06-2007 at 06:26 PM.

07-11-2007, 07:04 PM	#25
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: 1972 GMC Short Fleet AC tilt big block truck for parts with title. ttt

Register or Log In To remove these advertisements.