weekend progress , - The 1947 - Present Chevrolet & GMC Truck Message Board Network

19673ontree · 04-01-2007, 08:21 AM

well I have been at this truck for 6 week's straight here it is april and I have not even sprayed any primer yet !! I did however get my glove box door done if you can call that progress ,,,, man I've got to get on the move the cruz in's are getting fired up !!! I got my fender's painted on the inside yesterday and painted the cowl and underneath the cab , then reinstalled the fender's and the grill , maybe this week I can start priming and blocking ,
couple of thing's I have found where I have not worked on one of these truck's in a while is that THEY DON'T WANT TO ALIGN PROPERLY !!! UGGGGG
the door's on my truck are the original one's and would not align to give a good gap all around I ended up have to just align them as close as they would go and then cut and weld to get good line's and gap's !!! I'll take some pic's later today because as we all know ,,,,,,,,,,,,,,,,,,,,,,,,,

THIS THREAD IS WORTHLESS WITHOUT PICS !

LUV2XCLR8 · 04-01-2007, 08:38 AM

Not very many options on there, are you sure that is all that came on the truck?

on the progress, any progress no matter how little is always cool

19673ontree · 04-01-2007, 08:49 AM

yea mine is double plain jane , it only had a posi rear end and heater , did not even have a passenger sunvisor ,,

**Palf70Step** · 04-01-2007, 08:52 AM

Yeah body panel alignment is always fun. Especially with vehicles like our trucks that weren't assembled with precision looks in mind to begin with.

19673ontree · 04-01-2007, 09:46 AM

yea thats right ! these truck's were ment as mostly work vehicle's , the alignment is tough but it can be done , with a little blocking and priming I have mine to the point now where the gap's will look good , I notice a lot of these truck where the door's stick out past the cab corner's and fender's and I did not want mine to be that way , I want all my gap's even and when you look down the side I want everything level and nothing out to far , it's raining out but when it stop's I'll snap a few pic's of what I have done right now ,,,,

19673ontree · 04-01-2007, 09:48 AM

ohh yea and this was my first spec ID sticker doe's it look real ? or can you tell from a mile away that I made it on my computer ?

**Palf70Step** · 04-01-2007, 10:24 AM

Quote:

Originally Posted by 19673ontree

ohh yea and this was my first spec ID sticker doe's it look real ? or can you tell from a mile away that I made it on my computer ?

Only because you can actually see it instead of having 30+ years of coffe spills and grease on it.

19673ontree · 04-01-2007, 07:57 PM

well for a rainy sunday I got along pretty well this weekend , hope to be knee deep in high build primer by early week !!!!

72armyswbtruck · 04-01-2007, 08:05 PM

My forearms are sore and I and pretty tired and all that I did was cleaning and buffing

04-01-2007, 08:21 AM	#1
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	weekend progress , well I have been at this truck for 6 week's straight here it is april and I have not even sprayed any primer yet !! I did however get my glove box door done if you can call that progress ,,,, man I've got to get on the move the cruz in's are getting fired up !!! I got my fender's painted on the inside yesterday and painted the cowl and underneath the cab , then reinstalled the fender's and the grill , maybe this week I can start priming and blocking , couple of thing's I have found where I have not worked on one of these truck's in a while is that THEY DON'T WANT TO ALIGN PROPERLY !!! UGGGGG the door's on my truck are the original one's and would not align to give a good gap all around I ended up have to just align them as close as they would go and then cut and weld to get good line's and gap's !!! I'll take some pic's later today because as we all know ,,,,,,,,,,,,,,,,,,,,,,,,, THIS THREAD IS WORTHLESS WITHOUT PICS ! Attached Images __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-01-2007, 08:38 AM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: weekend progress , Not very many options on there, are you sure that is all that came on the truck? on the progress, any progress no matter how little is always cool __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 04-01-2007 at 08:39 AM.

04-01-2007, 08:49 AM	#3
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: weekend progress , yea mine is double plain jane , it only had a posi rear end and heater , did not even have a passenger sunvisor ,, Attached Images __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-01-2007, 08:52 AM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: weekend progress , Yeah body panel alignment is always fun. Especially with vehicles like our trucks that weren't assembled with precision looks in mind to begin with. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

04-01-2007, 09:46 AM	#5
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: weekend progress , yea thats right ! these truck's were ment as mostly work vehicle's , the alignment is tough but it can be done , with a little blocking and priming I have mine to the point now where the gap's will look good , I notice a lot of these truck where the door's stick out past the cab corner's and fender's and I did not want mine to be that way , I want all my gap's even and when you look down the side I want everything level and nothing out to far , it's raining out but when it stop's I'll snap a few pic's of what I have done right now ,,,, __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-01-2007, 09:48 AM	#6
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: weekend progress , ohh yea and this was my first spec ID sticker doe's it look real ? or can you tell from a mile away that I made it on my computer ? __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC

04-01-2007, 07:57 PM	#8
19673ontree CAN'T FIX NOTHIN Join Date: Sep 2006 Location: SOUTHRUST VIRGINIA !!! Posts: 2,112	Re: weekend progress , well for a rainy sunday I got along pretty well this weekend , hope to be knee deep in high build primer by early week !!!! Attached Images __________________ 1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC Last edited by 19673ontree; 04-01-2007 at 07:59 PM.

04-01-2007, 08:05 PM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: weekend progress , My forearms are sore and I and pretty tired and all that I did was cleaning and buffing Attached Images __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.