In the beginning.... 1966 C10

['66chevyfanatic]

Hi all,

I am fairly new here. I joined 2 years ago, but haven't had the time and/or money to work on this truck. Now, this spring, I have the time, some money, and a serious itch to get to work on this project. This truck belongs to my dad, and I'm tired of it just sitting and not getting anywhere. I'd really like to get this thing on the road before he's too old, and health problems or whatever cause him to not be able to enjoy it. I've wanted this truck since I was a kid, and he'd never sell it to me then. Now he tells me to just take it, but I'm not about to do that. So, he and I have come up with a plan to raise the money needed together to get this truck going, and it probably won't cost either of us a dime out of pocket. We buy and sell junk, and alot of the stuff we sell, we are putting all of the profits into the truck fund.

Now, we have a small pile of cash, and are in search of some parts for the chassis. We had the chassis blasted and painted about 2 years ago, and got it back about the time I joined this site. It has been sitting in my garage the same way since, due to lack of funds and parts. I am getting very serious about finding the parts we need to get the chassis done this spring. Once done, my goal for the remainder of this summer, is to have the bed and cab mounted back on the chassis, in ready to paint condition.

First things first. I need to find a 5 lug rear, and a front crossmember with a disc break set up. I'm not interested in one of the aftermarket kits, so I'm looking for a donor 1971-1972 truck. I figure by the time I buy all new calipers and rotors, etc. we'll have about the same amount of money in the brake set up as an aftermarket anyway, but I'll have the satisfaction of working on something old, and making it like new again. Plus, when parts need replacing, I'll be able to run to the local parts house and get what I need quickly and easily, without having to mix and match too much.

Here are some pics of the chassis that I took this morning.









The truck he has is a C20 2WD long bed fleetside. He has nearly enough parts to make 2+ trucks. He found another whole truck a few years back for $200.00, and it had a rust free stepside box on it. It was a C10 2WD longbed. We decided to use the C10 chassis, and the stepside box, and use everything else from the C20. The box just needs to be cleaned up, primed and painted. The box has absolutely no rust, and no dings or dents that I recall. I wanted to post some pics of the truck and the new box, but right now, they're inaccessable. Hopefully in a month or two they'll be dug out of my dad's garage and on the way to being mounted on the new chassis.

We're not doing a whole lot of fancy mods to the truck. It will retain a mostly stock appearance, stock ride height, and just a mild 283 or 350. We have 2-283's, and 3-350 engines laying around, it's just a matter of deciding which one we will rebuild and use for this truck. Other than that, the only upgrades/modifications in the plans are the disc brakes, power steering, and 5 lug rear end.

Sorry for the lengthy post, it's been two years since my intro post, so I thought I'd provide a bit of background with my pics. I hope you enjoy, I know I like looking at other peoples projects as they make progress. I'll be posting pics of the project as it comes along.

Thanks,
Tom


Also, could someone tell me if I understand the rules correctly? Is it correct that unless I'm a site supporter, I can not post in the parts FS section, even if it's a Wanted to Buy post? Or, am I allowed to post Wanted posts, but not FS posts? I intend to subscribe as a site supporter at some point, but not right now. I want to use all of the truck fund to get the parts needed for the truck first. Thanks much for any help.