Bolt in notch/ Inner fenders

[kwhite4]

I bought a bolt in style rear notch and cant use it. It will not clear my fab 9 rearend, never removed it from the box, paid 140 + shipping will take 100 plus shipping for it.
Also have good pair of inner fenders Ill take 50 for, probably wont want to ship these though.
Have a good radiator ,fan shroud, glovebox insert and bench seat, if anyone needs them make offer.

Let me know

Keith

[bw4sale]

I'm interested in the notch. What brand/who'd you buy from/pics etc?

[kwhite4]

They are cpp, checked it out paid 129 plus shipping havent taken them out of the box but you can look at them on thier website under truck suspension,
still a good deal save you 30 bucks.

[kwhite4]

Also selling this front bumper ,going to roll pan .
Real good shape no rust. Make offer

keith

[bw4sale]

One more question. Can you check shipping to 38555. I want them if shipping doesn't kill the deal. Thanks.

[Chevy_Man]

Where is gatesville near too? I live in Louisiana...about 50 miles from Lake Charles

[Shane]

I'm interested in the inners IF they are rust & dent free and you can figure out a way to ship.

Let me know.

[kevncar]

how much for the bumper? Is there any difference between GMC and Chevy bumpers?

[faribran]

how much for the fan shroud... pics plz.

[kwhite4]

Hey yall Ill see if I can answer all yallls questions.

BJ
Ill check on shipping to you, not to wise on that kinda stuff may take couple days. Also if i have to come down some to get you the parts I will . No sense sending them back if you could usem.
Ill let you know.

Chevyman
Gatesville is 35-40 miles west of Waco tx. hope that helps

Shane
Ill get some pics this weekend Last time I looked they were in good shape but the shipping might be more than they are worth but I will check.

Kevin
I dont know if there is a differnce between a GMC and a Chevy bumper maybe someone can help us on that. I do know it doesnt have a relief notch for the turn signals, just even all along the top .Try to find out if it will work for you and ill get pics of it once my truck gets back from the chasis shop, should be done by thursday.

Faribran
The fan shroud was on it when I bought the truck it had a small block in it but I dont have a clue if its factory or not . Ill get pics of it and if you want it find out what the shipping will be from 76501 and I will give it to you.

Thanks all

Keith

[kwhite4]

fenders surface rust should cleanup nice (bottle is junk)

[kwhite4]

Rad 3 core had no leaks when pulled 25.00

[kwhite4]

Seat had tires sitting on it should fluff back up 25.00

[kwhite4]

also have 2 15x12 weld rims and 2 MT et street slicks 3.5 back space on rims
Rims do have some lug hole wear but I never had any problems with them, have rim screwsand good tubes .
Cost alot to ship these .
300.00 for all (the slicks that are on rims are junk)

[oj70chevy]

kwhite4 PM sent.

[DUD2STUD]

I will get in line on the c notch if bw4sale dosn't take it.

[BarryB]

Question on your 9" rear diff. What did yours come out of ? I have one from a F@$^ truck. I am thinking of trying and putting it in. Can you give me any heads up.

[72CSTC5]

GMC front bumper has notches in them on the very top adjacent to the signal lamps on GMC's

[Huskerboy2]

I'll jump in line on the inners

[st1x10]

Any pics of the fan shroud?

[kwhite4]

I now have a full Moser rear assembly Fab style rear but I did have a 9 out of a 1966 Ford truck and it fit right in. Only .25 inches longer than the 10 bolt .
Problems are on the truck rear
1 bolt pattern is 5.5 in most cases (can get redrilled for +- 100)
2 rear is not centered in most cases driveshaft will run to the pass side and you will have to cut the cross member some to clear.

My truck had leaf springs so all I had to do is move the pads on the rear some
might be more difficult on the bar type rear.

Again most of the issues I had were on a 1966 rear newer rears may be different.

The fan schroud got damaged when i put it up in the rafters of my shop sorry didnt realize i broke it.

[kwhite4]

72CSTC5
Is correct on the bumper it does have indents for the blinkers
sorry been awhile since I seen my truck (toooooo long ) can remember what it looks like getting it back today.

Bumper will only work on GMC

Thanks Keith