Help Trying To Find Hard Parts!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**BAD4X4** · 04-19-2007, 08:35 AM

I posted an ad on the parts board for the carpet stainless and the inside rear panels. Also a single wall top in the northwest. As you can tell, no luck! Am I wasteing my time looking for these things? Thanx for the help, Dana

RustyParts · 04-19-2007, 09:18 AM

If you get desperate and have to buy new side panels, here's a place to get them, but they sure are expensive.

http://www.truckandcarshop.com/trucks60_72/t60_023.html

bouncytruck · 04-19-2007, 11:23 AM

Carpet strips and side panels will be difficult to find. I've only seen a couple of each come up forsale on the board in the past. I believe it was LIVRAT who had a top for sale a while back. I'm not sure if he still has it. Also, check with WES at Classicheartbeat.com and PICKMUP as they both seem to find deals in the northwest on a regular basis.

If you aren't going for stock, you can make your own rear side panels. RodDoors also makes "custom" side panels, but you'll need to take a mortgage out on your house to pay for them.

Brothers has the rear side panels for $460. http://www.brothersonlinestore.com/p...number=BRPS200

VinceY · 04-19-2007, 11:49 AM

Maybe specify if you want a single wall or double wall top also to make things easier.
Here is a link for a top:

http://67-72chevytrucks.com/vboard/s...d.php?t=235752

It takes time and lots of looking to find those hard to find pieces. It took me about 6 months to find the roll bar I wanted, so keep trying.
I made my side panels out of stanless steel as that was the look I wanted.
My top crome strips that hold the side panels will be up for sale in the next month or 2 as I do not need them. Not sure right now what I want to ask for them as they are in really good shape and are pretty hard to find.

**BAD4X4** · 04-19-2007, 09:47 PM

Vince I did specify what top I wanted, a single wall. Thanx everyone for the feed back. Dana

LUV2XCLR8 · 04-20-2007, 04:14 AM

I have an extra top, but I am in TN so it will not help ya

Like the others have said, be patient, really really patient

**BAD4X4** · 04-20-2007, 08:29 AM

Man we have all the rust free bodies you guys have all the good tops!!! Thats ok LUV, I think I found one maybe. It's only 6 hours away.I know patients I mean it only took me 6 years to finish and get parts for the 70 swb 4x4!!!!!!

**jamie72** · 04-20-2007, 04:40 PM

hey bad bring me a rustfree tub and i`ll give you a single wall top???
good luck in your serch...

**BAD4X4** · 04-22-2007, 02:11 AM

jamie that sounds like a good trade to me.Just got in from working on the blazer. Man I wonder what some people think when they half/ass everything in life!!! I found alot more problems with the blaze today. No big deal.

**special-K** · 04-22-2007, 08:16 AM

That`s how my`71 was.I was impressed with all the fresh work on it,so I bought it.The new parts were worth the asking prices.Thing was,once I got it home I had to undo 1/2 of it and put it back right.It had a fresh healthy-built motor,but leaked all over.It was clean when I bought it.Drove it home and every gasket was seeping.The torquer was a 327-type and there was no venting in the VCs.I put a set with breathers,cleaned it,and was good to go.It was a 3spd and when I wound it out getting out on the hiway in second,going to 3rd,the whole truck went from pullin`left to going right.The rear u-bolts were loose on the new lift kit,real loose,like cocked when I got home.That was just the beginning...
If I ever get over to my`70 CST parts Blazer I`ll check for the carpet strip condition.

Huck · 04-22-2007, 09:29 PM

I have 3 extra single wall tops--one white, and two black. Just a short ride---. Bring me down a rust free tub and you can have all three tops including carpet strips!!

04-19-2007, 08:35 AM	#1
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Help Trying To Find Hard Parts!!! I posted an ad on the parts board for the carpet stainless and the inside rear panels. Also a single wall top in the northwest. As you can tell, no luck! Am I wasteing my time looking for these things? Thanx for the help, Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's) Last edited by BAD4X4; 04-19-2007 at 08:36 AM.

04-19-2007, 09:18 AM	#2
RustyParts Registered User Join Date: May 2006 Location: Wyman, Kentucky Posts: 403	Re: Help Trying To Find Hard Parts!!! If you get desperate and have to buy new side panels, here's a place to get them, but they sure are expensive. http://www.truckandcarshop.com/trucks60_72/t60_023.html __________________ 1972 GMC Jimmy, 4WD, 454 CI, 350 Turbo, 4" lift, 35" tires The math teacher said my son "Bubba" could be a mathmatical genius. cause he's got 13 fingers!

04-19-2007, 11:23 AM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Help Trying To Find Hard Parts!!! Carpet strips and side panels will be difficult to find. I've only seen a couple of each come up forsale on the board in the past. I believe it was LIVRAT who had a top for sale a while back. I'm not sure if he still has it. Also, check with WES at Classicheartbeat.com and PICKMUP as they both seem to find deals in the northwest on a regular basis. If you aren't going for stock, you can make your own rear side panels. RodDoors also makes "custom" side panels, but you'll need to take a mortgage out on your house to pay for them. Brothers has the rear side panels for $460. http://www.brothersonlinestore.com/p...number=BRPS200 __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

04-19-2007, 11:49 AM	#4
VinceY Just need a couple more parts. Join Date: Jan 2005 Location: Calgary, Alberta, Canada Posts: 470	Re: Help Trying To Find Hard Parts!!! Maybe specify if you want a single wall or double wall top also to make things easier. Here is a link for a top: http://67-72chevytrucks.com/vboard/s...d.php?t=235752 It takes time and lots of looking to find those hard to find pieces. It took me about 6 months to find the roll bar I wanted, so keep trying. I made my side panels out of stanless steel as that was the look I wanted. My top crome strips that hold the side panels will be up for sale in the next month or 2 as I do not need them. Not sure right now what I want to ask for them as they are in really good shape and are pretty hard to find. __________________ --------------------------------------------------- 1947 Studebaker M5 project to match the camping trailer. 1950 Chev 4x4 Pickup 1958 Shasta Airflyte Travel trailer (fresh restoration) 1971 C/10 Pickup(Frame off Restoration) 1972 K5 Blazer CST (Daily Driver & My Company Truck) 1976 Honda CB750 Bobber 1988 Jaguar XJ12

04-19-2007, 09:47 PM	#5
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: Help Trying To Find Hard Parts!!! Vince I did specify what top I wanted, a single wall. Thanx everyone for the feed back. Dana __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

04-20-2007, 04:14 AM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Help Trying To Find Hard Parts!!! I have an extra top, but I am in TN so it will not help ya Like the others have said, be patient, really really patient __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-20-2007, 08:29 AM	#7
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: Help Trying To Find Hard Parts!!! Man we have all the rust free bodies you guys have all the good tops!!! Thats ok LUV, I think I found one maybe. It's only 6 hours away.I know patients I mean it only took me 6 years to finish and get parts for the 70 swb 4x4!!!!!! __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

04-20-2007, 04:40 PM	#8
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Help Trying To Find Hard Parts!!! hey bad bring me a rustfree tub and i`ll give you a single wall top??? good luck in your serch... __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

04-22-2007, 02:11 AM	#9
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: Help Trying To Find Hard Parts!!! jamie that sounds like a good trade to me.Just got in from working on the blazer. Man I wonder what some people think when they half/ass everything in life!!! I found alot more problems with the blaze today. No big deal. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

04-22-2007, 08:16 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Help Trying To Find Hard Parts!!! That`s how my`71 was.I was impressed with all the fresh work on it,so I bought it.The new parts were worth the asking prices.Thing was,once I got it home I had to undo 1/2 of it and put it back right.It had a fresh healthy-built motor,but leaked all over.It was clean when I bought it.Drove it home and every gasket was seeping.The torquer was a 327-type and there was no venting in the VCs.I put a set with breathers,cleaned it,and was good to go.It was a 3spd and when I wound it out getting out on the hiway in second,going to 3rd,the whole truck went from pullin`left to going right.The rear u-bolts were loose on the new lift kit,real loose,like cocked when I got home.That was just the beginning... If I ever get over to my`70 CST parts Blazer I`ll check for the carpet strip condition. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 04-22-2007 at 08:21 AM.

04-22-2007, 09:29 PM	#11
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Help Trying To Find Hard Parts!!! I have 3 extra single wall tops--one white, and two black. Just a short ride---. Bring me down a rust free tub and you can have all three tops including carpet strips!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.