Trim rings, how deep? Any pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PKelly · 04-21-2007, 07:24 AM

I have a set of Rally wheels from a 1984 Silverado that I'm cleaning up. I have the 4 trim rings but they're 3 different styles...replaced as lost/damaged over the years for sure. Does anyone have close up pictures of what style would have been original? How deep did were they from the factory?

cdowns · 04-21-2007, 08:14 AM

no factory ralley wheels were available till well after 72 so there arent any factory correct trim rings for these trucks

**special-K** · 04-21-2007, 08:29 AM

There were two styles for the correct beauty rings.They changed somewhere along the line.Sorry,no pics.

**Palf70Step** · 04-21-2007, 09:19 AM

Depends on the size of the wheel. The 6.5(or 7) inch wheel (first pic) used one style (thickness), while the 8 inch wheel used one with a deeper or thicker design (middle pic). The rings should go down to about where the rims kicks in to meet the center part of the wheel.

Also, as in the last shot, I had F150 rings on my ralleys(8 inch) on the 96. They do not have the sharper bends of the GM model rings, but work, and some thing looks better. Not the best photos, but all I had quick at hand.

04-21-2007, 07:24 AM	#1
PKelly Registered User Join Date: Feb 2006 Location: Cincinnati, Ohio Posts: 30	Trim rings, how deep? Any pics? I have a set of Rally wheels from a 1984 Silverado that I'm cleaning up. I have the 4 trim rings but they're 3 different styles...replaced as lost/damaged over the years for sure. Does anyone have close up pictures of what style would have been original? How deep did were they from the factory?

04-21-2007, 08:14 AM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Trim rings, how deep? Any pics? no factory ralley wheels were available till well after 72 so there arent any factory correct trim rings for these trucks __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-21-2007, 08:29 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Trim rings, how deep? Any pics? There were two styles for the correct beauty rings.They changed somewhere along the line.Sorry,no pics. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-21-2007, 09:19 AM	#4
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,820	Re: Trim rings, how deep? Any pics? Depends on the size of the wheel. The 6.5(or 7) inch wheel (first pic) used one style (thickness), while the 8 inch wheel used one with a deeper or thicker design (middle pic). The rings should go down to about where the rims kicks in to meet the center part of the wheel. Also, as in the last shot, I had F150 rings on my ralleys(8 inch) on the 96. They do not have the sharper bends of the GM model rings, but work, and some thing looks better. Not the best photos, but all I had quick at hand. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.