1962? Chevy Flatbed - Parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IvelDesigns · 04-26-2007, 12:03 AM

I will be parting this truck out over the next couple of months. Don't really want to mess with shipping big parts, but the truck is near Cedar Falls Iowa, and I am in Des Moines. So, you can either meet me in CF, or i can bring stuff to Des moines and you can meet me here.

I'm fine with shipping all of the small stuff.

the engine is the big inline 6. 292 i believe? has 99043 miles on it. It runs, but has sat for quite some time. Last time it was started was last summer and i believe it smoked at first, but was fine after the first 30 sec. i could get it running this weekend or next if needed.

anyways, here it is. Please post here with your requests. whatever doesn't sell is goin' to the scrap yard.

IvelDesigns · 04-26-2007, 12:05 AM

more

IvelDesigns · 04-26-2007, 12:07 AM

even more

IvelDesigns · 04-26-2007, 12:09 AM

and finally, more....

62 short step · 04-26-2007, 08:26 AM

How much for the heater & defrost control, and shipped to 70739? Thanks, Jeremy.

**special-K** · 04-26-2007, 09:15 AM

I interested in the emblems to 21771.If that steering wheel`s not cracked,pull it off before you let it go.Someone will need it.

IvelDesigns · 04-26-2007, 11:49 PM

Quote:

Originally Posted by 62 short step

How much for the heater & defrost control, and shipped to 70739? Thanks, Jeremy.

$40 shipped and i will try to save the cables. if i cannot save the cables, $30 shipped.

IvelDesigns · 04-26-2007, 11:51 PM

Quote:

Originally Posted by special-K

I interested in the emblems to 21771.If that steering wheel`s not cracked,pull it off before you let it go.Someone will need it.

$30 shipped.

i'm gonna head up there this weekend, and if i it will fit, i think i'm gonna pull the steering wheel and put it in my 69. It'll get some fresh paint though.

62 short step · 04-27-2007, 08:19 AM

Quote:

Originally Posted by IvelDesigns

$40 shipped and i will try to save the cables. if i cannot save the cables, $30 shipped.

Thats cool I'll pm you later with my info. Do you take paypal? Jeremy.

IvelDesigns · 04-27-2007, 09:15 AM

yup, paypal works. PM sent

also, for everyone else. if you can get your requests in today/tomorrow, i should be able to get your parts pulled this weekend and sent early next week.

62 short step · 04-27-2007, 02:42 PM

Paypal sent!! Thanks!

1963chevyshort · 05-16-2007, 11:50 PM

what condition is the drivers side and passenger side doors? Do you have pics of them?

IvelDesigns · 05-17-2007, 12:02 AM

not sure off the top of my head. pretty sure they are rotted out in the bottom, but will have call my dad tomorrow to check them out.

OhNoJoe · 05-19-2007, 06:41 AM

how is the ash tray and much shipped to 62704?
Thanks,
Joe

IvelDesigns · 05-19-2007, 01:09 PM

i'll check next weekend when i get there. assuming it's good, does $15 shipped work for you?

OhNoJoe · 05-24-2007, 11:28 PM

I'll take the ashtray for $15!!

IvelDesigns · 05-25-2007, 09:27 AM

i'll get it pulled this weekend.

thx

**CPNE** · 05-25-2007, 01:15 PM

How much for the shift lever knob to 03580?

IvelDesigns · 05-26-2007, 01:35 AM

Quote:

Originally Posted by CPNE

How much for the shift lever knob to 03580?

on that one, i'm gonna have to ask around. I'm not trying to get rich or anything like that, but i have seen factory shift knobs in worse shape go for over $150.

seems crazy to me, but, if that's what they are worth, i'd like to get more than the $5 that i'd normally let it go for.

OhNoJoe · 05-29-2007, 11:57 PM

Did you get the ashtray? shoot me a pm

**ScottH** · 05-31-2007, 03:32 PM

Would be interested in condition & price for the following:
Inside door handles & window crank handles
Roof lights
master cylinder (condition not important)
air cleaner

Thanks.

babyJay · 06-03-2007, 09:54 AM

That grille should ship UPS, how much for it? Is it straight, pics look good. Mine's bent, see pic.

IvelDesigns · 06-04-2007, 12:13 AM

i will heading up there next weekend and will pull all of the parts people have requested. I'll take pics then, and send PM's to see who still wants the parts. I've had a couple people pay for a few items already, and i feel bad that i was not able to get them pulled as quickly as i had hoped. So, to prevent that from happening, i'll pull the good parts and post them here, with a price.

OhNoJoe · 06-05-2007, 05:03 PM

If you could get a good look at the two side peices between the grill and the fender as well as the top piece that runs above the grill. I might be able to convince the boss to buy those too.

IvelDesigns · 06-05-2007, 05:32 PM

will do. I'll take close up shots of all of the good parts.

04-26-2007, 12:03 AM	#1
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	1962? Chevy Flatbed - Parting out I will be parting this truck out over the next couple of months. Don't really want to mess with shipping big parts, but the truck is near Cedar Falls Iowa, and I am in Des Moines. So, you can either meet me in CF, or i can bring stuff to Des moines and you can meet me here. I'm fine with shipping all of the small stuff. the engine is the big inline 6. 292 i believe? has 99043 miles on it. It runs, but has sat for quite some time. Last time it was started was last summer and i believe it smoked at first, but was fine after the first 30 sec. i could get it running this weekend or next if needed. anyways, here it is. Please post here with your requests. whatever doesn't sell is goin' to the scrap yard. Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-26-2007, 12:05 AM	#2
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out more Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-26-2007, 12:07 AM	#3
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out even more Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-26-2007, 12:09 AM	#4
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out and finally, more.... Attached Images __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-26-2007, 08:26 AM	#5
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 1962? Chevy Flatbed - Parting out How much for the heater & defrost control, and shipped to 70739? Thanks, Jeremy.

04-26-2007, 09:15 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 1962? Chevy Flatbed - Parting out I interested in the emblems to 21771.If that steering wheel`s not cracked,pull it off before you let it go.Someone will need it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-27-2007, 09:15 AM	#10
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out yup, paypal works. PM sent also, for everyone else. if you can get your requests in today/tomorrow, i should be able to get your parts pulled this weekend and sent early next week. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

04-27-2007, 02:42 PM	#11
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 1962? Chevy Flatbed - Parting out Paypal sent!! Thanks!

05-16-2007, 11:50 PM	#12
1963chevyshort New Member Join Date: Mar 2007 Location: Houston,TX Posts: 261	Re: 1962? Chevy Flatbed - Parting out what condition is the drivers side and passenger side doors? Do you have pics of them? __________________ Anthony 63 chevy stepside SWB 57 chevy 2dr hrdtop belair

05-17-2007, 12:02 AM	#13
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out not sure off the top of my head. pretty sure they are rotted out in the bottom, but will have call my dad tomorrow to check them out. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-19-2007, 06:41 AM	#14
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: 1962? Chevy Flatbed - Parting out how is the ash tray and much shipped to 62704? Thanks, Joe

05-19-2007, 01:09 PM	#15
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out i'll check next weekend when i get there. assuming it's good, does $15 shipped work for you? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-24-2007, 11:28 PM	#16
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: 1962? Chevy Flatbed - Parting out I'll take the ashtray for $15!!

05-25-2007, 09:27 AM	#17
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out i'll get it pulled this weekend. thx __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-25-2007, 01:15 PM	#18
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	Re: 1962? Chevy Flatbed - Parting out How much for the shift lever knob to 03580? __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all



Register or Log In To remove these advertisements.

05-29-2007, 11:57 PM	#20
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: 1962? Chevy Flatbed - Parting out Did you get the ashtray? shoot me a pm

05-31-2007, 03:32 PM	#21
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: 1962? Chevy Flatbed - Parting out Would be interested in condition & price for the following: Inside door handles & window crank handles Roof lights master cylinder (condition not important) air cleaner Thanks. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

06-03-2007, 09:54 AM	#22
babyJay Arrived on a Pale Horse Join Date: Mar 2007 Location: SnagTown Indiana Posts: 2,524	Re: 1962? Chevy Flatbed - Parting out That grille should ship UPS, how much for it? Is it straight, pics look good. Mine's bent, see pic. __________________ Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW Last edited by babyJay; 06-03-2007 at 10:06 AM. Reason: omission

06-04-2007, 12:13 AM	#23
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out i will heading up there next weekend and will pull all of the parts people have requested. I'll take pics then, and send PM's to see who still wants the parts. I've had a couple people pay for a few items already, and i feel bad that i was not able to get them pulled as quickly as i had hoped. So, to prevent that from happening, i'll pull the good parts and post them here, with a price. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

06-05-2007, 05:03 PM	#24
OhNoJoe Registered User Join Date: May 2006 Location: Springfield Illinois Posts: 182	Re: 1962? Chevy Flatbed - Parting out If you could get a good look at the two side peices between the grill and the fender as well as the top piece that runs above the grill. I might be able to convince the boss to buy those too.

06-05-2007, 05:32 PM	#25
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: 1962? Chevy Flatbed - Parting out will do. I'll take close up shots of all of the good parts. __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

Register or Log In To remove these advertisements.