transfer case shifter knobs for sale

[Down south truckin]

ON SALE!! $45 plus shipping! I had some of these made here locally and to offset the price i will be selling a few there is a limited supply so don't hesitate. I've seen nos ones on e-bay for $140+ and used ones in the 30-45 dollar range so I'll price these at $45 plus shipping and while they are nice and shiny they are NOT exact replicas and there is some diffrences I'll try to post a picture of one next to an original.another thing that I've ran into is the threads on the shifter there is 2 different ones 3/8s and 7/16s so let me know which one you need. I am also having some made for the sm465 4 spd shifter but they won't be ready for a week or so (i hope) thanks Mike

[special-K]

I`m good,but NICE!!!

[meathead95]

wow where did you get those made?

[LUV2XCLR8]

WOWSERS, Very nice looking, too bad I don't need one

[BAD4X4]

very NICE!!!!!!

[PICKMUP]

Are the letters & numbers "embossed" down into the knob, like the originals?

[Down south truckin]

Originally Posted by PICKMUP

Are the letters & numbers "embossed" down into the knob, like the originals?

yes but they're not as deep as the originals

[1969k10stepside]

I will think about this deal and let you know by tomorrow.Going to have to see which thread pattern mine has too....

[Down south truckin]

the lettering is a little different and the height is off but it matches the 67-70 knob pretty good i have some plain ones if you want to run the stickers on the dash for $20 plus shipping here is all 3 pictured together thanks Mike oh yeah how about some input are the prices reasonable?

[Down south truckin]

wow, i expected to be malled on these are they to high? ttt DST

[meathead95]

i think the price is fair, but i also think someone that is willing to spend this kind of money is building a high dollar truck. and will probably keep an eye out for nos or perfect used and buy this as a last resort. and for the daily driver beater folks, i dont think they are willing to spend it on a shift knob.

[Down south truckin]

Originally Posted by meathead95

i think the price is fair, but i also think someone that is willing to spend this kind of money is building a high dollar truck. and will probably keep an eye out for nos or perfect used and buy this as a last resort. and for the daily driver beater folks, i dont think they are willing to spend it on a shift knob.

that makes sense, do you want to sell your k-20 my friend that rode with me to meet you is looking for one or if you know of a lwb 4x4 either 1/2 or 3/4 let me know thanks Mike

[1969k10stepside]

Im still pondering the idea of the shift knob....Will let you know tomorrow.
As for a K10 or K20....How far you willing to drive?There is a few 67-72 4wds here for sale locally.Around 3k for one IIRC....might be selling my 69 as well.As soon as its done being converted to a 1 ton....

[meathead95]

mine k20 is fairly nice but it does need a paint job if i was to sell it i would have to have 7k for it

[Down south truckin]

Originally Posted by 1969k10stepside

Im still pondering the idea of the shift knob....Will let you know tomorrow.
As for a K10 or K20....How far you willing to drive?There is a few 67-72 4wds here for sale locally.Around 3k for one IIRC....might be selling my 69 as well.As soon as its done being converted to a 1 ton....

Dustin southern Indiana would'nt be out of the question for the (right truck) he's looking for something decent that would'nt need a total resto but is not to nice to use in the 3k range is where he has been looking could you get some contact info on the ones for sale or some details on yours and just let me know on the knob from the looks of it i need to put a few of mine on e-bay thanks Mike

[Down south truckin]

Originally Posted by meathead95

mine k20 is fairly nice but it does need a paint job if i was to sell it i would have to have 7k for it

gotcha, thats a little out of the price range he's been looking at let me know if anything turns up for sale in your neck of the woods thanks Mike

[1969k10stepside]

Will try to get you some info on the close ones.Member Troy-Built which is another 2 hours north of me has a 69 K20 with factory lockers and 4:56 gears for sale.I think he wants 4k for it.Its supposed to be in great shape and he has pics of it on here.You might want to talk to him too.
Mine was a average 69 4wd 1/2 ton.It was from up north so its rusty rusty rusty.I plan on but have been busy on the shortbed....the plans are to put a dana 60 front in,rear 14 bolt.4:10 gears.Posi front,locker rear.6" lift and 35s.Might be a little more than he wants,but I may not get to it for awhile.I still need to get the shortbed ready for paint.I found a donor truck body from a 2wd I want to transplant on it.It has some rocker rust,the doors might need replaced,or atleast patchedmand the cab corners might could used replaced but for the truck,I think it would be fine.For what I plan to use it for though.I would like to keep it as is so it would atleast be mostly one color
Here is the donor 2wd.Dont have any pics of it(the 4wd) now....

[Down south truckin]

Originally Posted by 1969k10stepside

Will try to get you some info on the close ones.Member Troy-Built which is another 2 hours north of me has a 69 K20 with factory lockers and 4:56 gears for sale.I think he wants 4k for it.Its supposed to be in great shape and he has pics of it on here.You might want to talk to him too.
Mine was a average 69 4wd 1/2 ton.It was from up north so its rusty rusty rusty.I plan on but have been busy on the shortbed....the plans are to put a dana 60 front in,rear 14 bolt.4:10 gears.Posi front,locker rear.6" lift and 35s.Might be a little more than he wants,but I may not get to it for awhile.I still need to get the shortbed ready for paint.I found a donor truck body from a 2wd I want to transplant on it.It has some rocker rust,the doors might need replaced,or atleast patchedmand the cab corners might could used replaced but for the truck,I think it would be fine.For what I plan to use it for though.I would like to keep it as is so it would atleast be mostly one color
Here is the donor 2wd.Dont have any pics of it(the 4wd) now....
Attachment 264082

thanks Dustin i remember troy-builts truck on here a while back I'll do a search and check it out

[71 super]

These knobs are of very good quality. Mike delivered one for me this weekend at Maggie. If you are in need tthese are a great option for your scrached or roughed up original. Mike let me know when the 465 knobs are ready. Thanks 71 super

[Down south truckin]

TTT i still have several of these available!

[Douglas]

Do you have any of the knobs left? I need a transfer case knob with 7/16 thread.
Thanks
Doug

[RPBurris]

Would you be able to engrave a different shift pattern? I have an NP203 with a conversion kit and have a peice of paper somewhere with the shift pattern. A nice knob with the correct pattern would be awesome and well worth it. Thanks.

[terryggoround]

Are there any shift knobs still available? Total with shipping to 94619.
Thanks
Terry