Planning exhuast for Lil' Red - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChevyDude · 05-01-2007, 12:50 PM

QTP Goodies just arrived via the big brown truck...it's time to schedule Lil' Red a date with the exhaust shop. I went with 2.5" 409 SS tubing and QTP 2.5" cut-outs and electric do dad goodies thru a Bassani X piece and back. 18" Magnaflow slash tips will exit in front of the rear tires. Another piece to the puzzle!

Ole Blue 68 · 05-01-2007, 12:56 PM

**Palf70Step** · 05-01-2007, 01:03 PM

That'll work.

**Hart_Rod** · 05-01-2007, 01:29 PM

Can you list the part #'s for the pieces you got?

ChevyDude · 05-01-2007, 02:15 PM

Will do! I got my SS cutouts and QTP parts off of Ebay. But after doing more research I found I could have saved 50 bucks had I ordered them from Summit. I will get numbers for you later today or tonight.

Alex

IvelDesigns · 05-01-2007, 02:16 PM

great lookin' parts there.

what made you go with 2.5" instead of 3"? I will be doing my exhaust in the next month, but fortunately for me, i have access to a bender, and a guy who has done custom exhaust work for the past 20 years. I had planned to go with 3" duals with an X pipe and cut outs. however, in the past couple days, i've seen a few posts where people went with 2.5", not 3".

thoughts?

**Yukon Jack** · 05-01-2007, 02:27 PM

That's a sweet looking x-pipe! Bet that will be quite the attention getter when you hit the switch and open those cutouts!

ChevyDude · 05-01-2007, 04:17 PM

Quote:

Originally Posted by IvelDesigns

great lookin' parts there.

what made you go with 2.5" instead of 3"? I will be doing my exhaust in the next month, but fortunately for me, i have access to a bender, and a guy who has done custom exhaust work for the past 20 years. I had planned to go with 3" duals with an X pipe and cut outs. however, in the past couple days, i've seen a few posts where people went with 2.5", not 3".

thoughts?

I read and read and read....Most of what I was reading advised 2.5" with a small block chevy. I'm going with the experts!

glock35ipsc · 05-01-2007, 05:06 PM

You don't screw around now, do you Alex!! That's gonna be awesome! I don't see any muffs there, what are you going to run for those?

And please refresh my memory, what all have you done to the engine?

ChevyDude · 05-01-2007, 06:56 PM

No ...not trying to mess around, trying to get it done! Glock the engine was just rebuilt when I bought it 4 years ago, by the PO's machine shop in Colorado Springs. I drove it and it definetly gets up and goes. He told me it was built to a streetable 350 hp, that works for me.

Muff's are dynomax super turbos.

ChevyDude · 05-02-2007, 09:57 AM

Quote:

Originally Posted by Hart_Rod

Can you list the part #'s for the pieces you got?

Here is the best deal I could find, I didn't buy my set from Summit, but had I, I would have saved 50 bucks!

http://store.summitracing.com/partde...5&autoview=sku

Bought these Muffs from Summit:
http://store.summitracing.com/partde...5&autoview=sku

I got my Magnaflow tips off ebay, they are 2.5" opening to a 3.5" slash tip and 18" long:
http://cgi.ebay.com/ebaymotors/Magna...spagenameZWDVW

**Hart_Rod** · 05-02-2007, 11:09 AM

Quote:

Originally Posted by ChevyDude

Here is the best deal I could find, I didn't buy my set from Summit, but had I, I would have saved 50 bucks!

http://store.summitracing.com/partde...5&autoview=sku

Bought these Muffs from Summit:
http://store.summitracing.com/partde...5&autoview=sku

I got my Magnaflow tips off ebay, they are 2.5" opening to a 3.5" slash tip and 18" long:
http://cgi.ebay.com/ebaymotors/Magna...spagenameZWDVW

SSSSSSWWWWWEEEEEEEEEEEEETTTTTTT!!!!!!!!!!

ChevyDude · 05-02-2007, 11:21 AM

I bought the 409 SS pipe off ebay and also the Bassani X pipe.

05-01-2007, 12:50 PM	#1
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Planning exhuast for Lil' Red QTP Goodies just arrived via the big brown truck...it's time to schedule Lil' Red a date with the exhaust shop. I went with 2.5" 409 SS tubing and QTP 2.5" cut-outs and electric do dad goodies thru a Bassani X piece and back. 18" Magnaflow slash tips will exit in front of the rear tires. Another piece to the puzzle! Attached Images __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 05-01-2007 at 06:50 PM.

05-01-2007, 12:56 PM	#2
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	Re: Planning exhuast for Lil' Red

05-01-2007, 01:03 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,762	Re: Planning exhuast for Lil' Red That'll work. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-01-2007, 01:29 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: Planning exhuast for Lil' Red Can you list the part #'s for the pieces you got? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

05-01-2007, 02:15 PM	#5
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Planning exhuast for Lil' Red Will do! I got my SS cutouts and QTP parts off of Ebay. But after doing more research I found I could have saved 50 bucks had I ordered them from Summit. I will get numbers for you later today or tonight. Alex __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 05-01-2007 at 02:16 PM.

05-01-2007, 02:16 PM	#6
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: Planning exhuast for Lil' Red great lookin' parts there. what made you go with 2.5" instead of 3"? I will be doing my exhaust in the next month, but fortunately for me, i have access to a bender, and a guy who has done custom exhaust work for the past 20 years. I had planned to go with 3" duals with an X pipe and cut outs. however, in the past couple days, i've seen a few posts where people went with 2.5", not 3". thoughts? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

05-01-2007, 02:27 PM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Planning exhuast for Lil' Red That's a sweet looking x-pipe! Bet that will be quite the attention getter when you hit the switch and open those cutouts! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-01-2007, 05:06 PM	#9
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: Planning exhuast for Lil' Red You don't screw around now, do you Alex!! That's gonna be awesome! I don't see any muffs there, what are you going to run for those? And please refresh my memory, what all have you done to the engine? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 05-01-2007 at 05:07 PM.

05-01-2007, 06:56 PM	#10
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Planning exhuast for Lil' Red No ...not trying to mess around, trying to get it done! Glock the engine was just rebuilt when I bought it 4 years ago, by the PO's machine shop in Colorado Springs. I drove it and it definetly gets up and goes. He told me it was built to a streetable 350 hp, that works for me. Muff's are dynomax super turbos. __________________ Alex 1971 Lil' Red 350 SBC 700R4 Last edited by ChevyDude; 05-01-2007 at 06:56 PM.

05-02-2007, 11:21 AM	#13
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Planning exhuast for Lil' Red I bought the 409 SS pipe off ebay and also the Bassani X pipe. __________________ Alex 1971 Lil' Red 350 SBC 700R4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.