|
05-05-2007, 07:41 PM
|
#1 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Will part out soon
Here's my truck
If it doesn't sell soon I will be parting the ENTIRE thing out. Let me know if you see anything you're interested in http://67-72chevytrucks.com/vboard/c...ct=1618&cat=12 Thanks, Jonathan
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
05-05-2007, 09:25 PM
|
#2 |
|
Registered User
Join Date: Mar 2007
Location: A cave
Posts: 52
|
Re: Will part out soon
put me first in line for the bucket seats if you part it out
|
|
|
|
|
05-05-2007, 09:41 PM
|
#3 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,852
|
Re: Will part out soon
It`s a nice truck.Things are gettin`funky out there in buyersville.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
05-05-2007, 09:51 PM
|
#4 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
Sorry Bagged, I already got rid of the bucket seats.
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-05-2007, 10:12 PM
|
#5 |
|
Account Suspended
Join Date: Apr 2007
Location: Henry County KY
Posts: 125
|
Re: Will part out soon
Rear bumper and brackets? How much?
|
|
|
|
|
05-05-2007, 10:21 PM
|
#6 |
|
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
Re: Will part out soon
Tell me more about the dropped spindles and springs. I will be very interested in those.I could also use the trim around the front and back windshield if it's in good shape!
Shawn
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE Last edited by jorgensensc; 05-05-2007 at 10:24 PM. Reason: added more stufff. |
|
|
|
|
05-05-2007, 10:42 PM
|
#7 |
|
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
Re: Will part out soon
Put Me 1st In Line For Painless Wiring
|
|
|
|
|
05-06-2007, 12:09 AM
|
#8 |
|
Senior Member
 Join Date: Mar 2003
Location: Virginia
Posts: 809
|
Re: Will part out soon
Could you tell me the year, make and model vehicle that your master cylinder came from. I have a similar one, installed by PO and do not know anything about it. Thanks.
|
|
|
|
|
05-06-2007, 12:50 AM
|
#9 |
|
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
Re: Will part out soon
If you are going to part it out, please post a list prices per forum rules.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
|
05-06-2007, 01:34 AM
|
#10 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
Sorry N2
If someone wants the complete engine I will take $3000 for it (It has over $4000 in parts currently) Dana 60- $600 Interior-$300 for all thats left( gas tank carpet, carpet, dash pad, door panels, armrests, visors) I'll list more when I think of some big things
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 01:36 AM
|
#11 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
Ridge, the master cylinder and booster is from a '82 S-10 I think, whatever the first year they made them was. But I'm betting it's out of an S-10 if it looks similar to mine.
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 09:43 AM
|
#12 |
|
Senior Member
Join Date: Mar 2003
Location: Virginia
Posts: 809
|
Re: Will part out soon
68gmcjon
Thanks for the reply. I will check on that. |
|
|
|
|
05-06-2007, 10:24 AM
|
#13 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: Will part out soon
what size is the carb and how much?
|
|
|
|
|
05-06-2007, 11:27 AM
|
#14 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
jorge-the springs are stock in front and I just flipped the back
the spindles are Classic Performance Products, painted flat black rage-the carb is a barry grant 750 mech. secondaries I'll let it go with the fuel rail for $400
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 11:30 AM
|
#15 |
|
Keep On Keepin' On
Join Date: Apr 2006
Location: Oklahoma
Posts: 417
|
Re: Will part out soon
How about the and steering column..? Does it have a factory tach?
__________________
07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669 Last edited by COACHMEASON; 05-06-2007 at 11:35 AM. Reason: i am an idiot |
|
|
|
|
05-06-2007, 11:35 AM
|
#16 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
Drive shaft is stock with the carrier bearing and all. Always wanted to get a one piece but never did. You wanting the front/back shaft?
The column is stock, no-tilt I'll put you down for those and come up with some prices
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 12:43 PM
|
#17 |
|
buffle
Join Date: Sep 2004
Location: Independence, Mo
Posts: 426
|
Re: Will part out soon
how is rear lowered? need springs shocks etc. let me know........George
|
|
|
|
|
05-06-2007, 12:44 PM
|
#18 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
the rear is a leaf spring. Lowered by doing an axle flip
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 01:03 PM
|
#19 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
anyone interested in the disk brake conversion??
Cross drilled/Gas slotted rotors I'll let it go for $600
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 01:50 PM
|
#20 |
|
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
Re: Will part out soon
I am interested in the spindles if you seperate it. Let me know.
Shawn
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
|
|
|
|
05-06-2007, 02:40 PM
|
#21 |
|
Registered User
Join Date: Jan 2007
Location: Columbus, Ohio
Posts: 4,346
|
Re: Will part out soon
Put me 2nd in line for the 18 circuit harness-
Thx |
|
|
|
|
05-06-2007, 03:40 PM
|
#22 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
Price on the harness is going to be $250 shipped. First one to send me the money gets it
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 04:15 PM
|
#23 |
|
Account Suspended
Join Date: Apr 2007
Location: Henry County KY
Posts: 125
|
Re: Will part out soon
How much for rear bumper and brackets?
|
|
|
|
|
05-06-2007, 04:25 PM
|
#24 |
|
Got earplugs?
Join Date: Mar 2002
Location: Winfield, Kansas
Posts: 556
|
Re: Will part out soon
Rear bumper and brackets $200
Bumper and brackets were bought new about 3 years ago
__________________
1968 GMC Original A/C, bucket seats, PS,PB 396 bored to 402, Dynomax cerama-coat headers, Super 40 Flowmasters, 272/284 Crane cam, Crane gold roller rockers, holley 750 cfm double pumper, Edelbrock Performer RPM intake, HEI ignition, 9.5:compression Alltogether 411HP and 446ft/lbs Dana 60 w/ 3.54 gears Turbo 400 tranny Why would you have anything other than a big block? HAHA |
|
|
|
|
05-06-2007, 07:02 PM
|
#25 |
|
Keep On Keepin' On
Join Date: Apr 2006
Location: Oklahoma
Posts: 417
|
Re: Will part out soon
Thanks for the info..I'll pass
__________________
07 Avalanche Z71 92 Mustang 5.0 GT (Triple White w/ 53,000 miles) 72 SWB Chevy w/ PS, AC, 350/350 Current Project ....In paint shop getting body/paint work done (Corvette Velocity Yellow)... http://67-72chevytrucks.com/vboard/s...d.php?t=157669 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
