1967 SWB stepper in NE AZ!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70rs/ss · 05-07-2007, 02:53 PM

I am selling my next project as it looks like it'll be awhile till I can get to it. It is a 67 short bed stepside. No motor or trans (I have several motors available if you want to pay me to install one?). It is nice and rust free!!. Drums all around, not sure of the rear gear ratio, so lets just say it's an open (might be a posi, but not sure). The wood floor is Blah, but it's 40 years old so, that's a no brainer.

$1500 OBO, I can deliver part way for the cost of fuel. LMK

70rs/ss · 05-07-2007, 02:55 PM

More picts

Bamm · 05-07-2007, 02:59 PM

Man, wish that was closer!!!! A curse on you rust-free Arizona people!!!

I looked for a pair of those bucket seats forever and a day and couldn't find any.................................Bamm!

70rs/ss · 05-07-2007, 03:00 PM

more

70rs/ss · 05-07-2007, 03:02 PM

To help some of you rust free challenged easterners, I may be headed to St Louis in July and will bring this with me. Let me know. I am going to St Louis for sure, just not sure if I'll deliver (or need to), if you want it and will pay me to drag it there I will do it.

mike

70rs/ss · 05-07-2007, 06:13 PM

Wrong place? Should it go in the Classified? It is not a running driving truck, just thought I'd ask?

jorgensensc · 05-07-2007, 06:21 PM

I will say that I bought my latest truck from mike and he is a top notch Guy. When he says something it is true. Be at ease buying from him. his stuff is exactly as described. He made sure I could drive the truck I bought from him from Arizona back to Houston. It did it without a problem. It probably couldn't have if he wouldn't have taken the time to make sure it would!! Thanks Mike!
Shawn

**jaros44sr** · 05-07-2007, 07:06 PM

Quote:

Originally Posted by Bamm

Man, wish that was closer!!!! A curse on you rust-free Arizona people!!!

I looked for a pair of those bucket seats forever and a day and couldn't find any.................................Bamm!

If it were closer you would have to beat me to it, haha

Dbl curse on you rust free guys...

**71swb4x4** · 05-07-2007, 07:10 PM

Looks like a nice truck. How close to South Dakota could you get it?

70rs/ss · 05-07-2007, 07:38 PM

Quote:

Originally Posted by jaros44

If it were closer you would have to beat me to it, haha

Dbl curse on you rust free guys...

I am only a drive away!! I can get it running and driving, then you can fly in and drive home like Shawn did above!! He flew to Phoenix and I met him at the airport, and he drove it home.

*Shane* · 05-07-2007, 11:53 PM

If you decide to part it, I am very interested in the low back buckets. Have cash.

CrashEd · 05-07-2007, 11:58 PM

how much would it be if you drug it to stlouis and i meet you there.
Ed

uno67 · 05-08-2007, 12:53 AM

pm sent

*FormerMember* · 05-08-2007, 09:15 AM

What motor/trans could you stuff in it for a fly in and drive home deal?

I am interested... could be an adventure!

70rs/ss · 05-08-2007, 11:52 AM

I can gather up a 350/4-speed or auto (whatever I can get my hands on!) and have it road worthy for another $1k. $2500 and drive it home? If I deliver to St Louis as it sits, I'd say $600. ($2100 delivered to St Louis) ($2500 ready to drive) $1500 as it sits. Shane if I part it I'll let you know, but I'd really rather sell it whole, as I have two others I need to get done and sold. The 67 4X4 is a few days from running and driving and will for sale in the next few weeks (hopefully) then on to the K5 and it'll be for sale as well. I have too many!!

killer71 · 05-08-2007, 12:21 PM

Man that's a great project truck...hate to see it parted out! Someone should want this ol baby. Probably needs to go in classified section, see what I can do.

70rs/ss · 05-08-2007, 05:02 PM

Quote:

Originally Posted by killer71

Man that's a great project truck...hate to see it parted out! Someone should want this ol baby. Probably needs to go in classified section, see what I can do.

I figured it in parts because it isn't a running truck (but I am trying to sell it as it sits?) If it needs to go there, then I understand.

70rs/ss · 05-08-2007, 11:31 PM

Anyone? I have a couple of lookers, but no buyers? I need this gone so I can dedicate the time and $$$ tot he others. Let me know.

mal68ibu · 05-09-2007, 11:20 AM

Quote:

Originally Posted by Bamm

Man, wish that was closer!!!! A curse on you rust-free Arizona people!!!

I looked for a pair of those bucket seats forever and a day and couldn't find any.................................Bamm!

What are those buckets out of? They look like a pretty good alternative for my 67 gmc, vs. paying big bucks for blazer seats.

brak · 05-09-2007, 11:27 AM

those are the lowback buckets found in some 88-98 pickups

otsenre · 05-09-2007, 07:52 PM

What city in Arizona are you in? Thanks

70rs/ss · 05-09-2007, 10:57 PM

I live in the four corners area, not too awful far from you?

70rs/ss · 05-10-2007, 12:03 PM

ttt

jorgensensc · 05-12-2007, 04:50 PM

TTT for a great guy!

bad_turbo · 05-13-2007, 05:12 PM

ttt for Mike, but would you take any trades or is your lot full?

05-07-2007, 02:53 PM	#1
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	1967 SWB stepper in NE AZ!! I am selling my next project as it looks like it'll be awhile till I can get to it. It is a 67 short bed stepside. No motor or trans (I have several motors available if you want to pay me to install one?). It is nice and rust free!!. Drums all around, not sure of the rear gear ratio, so lets just say it's an open (might be a posi, but not sure). The wood floor is Blah, but it's 40 years old so, that's a no brainer. $1500 OBO, I can deliver part way for the cost of fuel. LMK Attached Images

05-07-2007, 02:55 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! More picts Attached Images

05-07-2007, 02:59 PM	#3
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Re: 1967 SWB stepper in NE AZ!! Man, wish that was closer!!!! A curse on you rust-free Arizona people!!! I looked for a pair of those bucket seats forever and a day and couldn't find any.................................Bamm! __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS Last edited by Bamm; 05-07-2007 at 03:00 PM.

05-07-2007, 03:00 PM	#4
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! more Attached Images

05-07-2007, 03:02 PM	#5
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! To help some of you rust free challenged easterners, I may be headed to St Louis in July and will bring this with me. Let me know. I am going to St Louis for sure, just not sure if I'll deliver (or need to), if you want it and will pay me to drag it there I will do it. mike

05-07-2007, 06:13 PM	#6
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Wrong place? Should it go in the Classified? It is not a running driving truck, just thought I'd ask?

05-07-2007, 06:21 PM	#7
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 1967 SWB stepper in NE AZ!! I will say that I bought my latest truck from mike and he is a top notch Guy. When he says something it is true. Be at ease buying from him. his stuff is exactly as described. He made sure I could drive the truck I bought from him from Arizona back to Houston. It did it without a problem. It probably couldn't have if he wouldn't have taken the time to make sure it would!! Thanks Mike! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

05-07-2007, 07:10 PM	#9
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,499	Re: 1967 SWB stepper in NE AZ!! Looks like a nice truck. How close to South Dakota could you get it? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

05-07-2007, 11:53 PM	#11
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: 1967 SWB stepper in NE AZ!! If you decide to part it, I am very interested in the low back buckets. Have cash.

05-07-2007, 11:58 PM	#12
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: 1967 SWB stepper in NE AZ!! how much would it be if you drug it to stlouis and i meet you there. Ed

05-08-2007, 12:53 AM	#13
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: 1967 SWB stepper in NE AZ!! pm sent

05-08-2007, 09:15 AM	#14
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 1967 SWB stepper in NE AZ!! What motor/trans could you stuff in it for a fly in and drive home deal? I am interested... could be an adventure!

05-08-2007, 11:52 AM	#15
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! I can gather up a 350/4-speed or auto (whatever I can get my hands on!) and have it road worthy for another $1k. $2500 and drive it home? If I deliver to St Louis as it sits, I'd say $600. ($2100 delivered to St Louis) ($2500 ready to drive) $1500 as it sits. Shane if I part it I'll let you know, but I'd really rather sell it whole, as I have two others I need to get done and sold. The 67 4X4 is a few days from running and driving and will for sale in the next few weeks (hopefully) then on to the K5 and it'll be for sale as well. I have too many!!

05-08-2007, 12:21 PM	#16
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: 1967 SWB stepper in NE AZ!! Man that's a great project truck...hate to see it parted out! Someone should want this ol baby. Probably needs to go in classified section, see what I can do. __________________ R.I.P. Killer 71 10/26/07

05-08-2007, 11:31 PM	#18
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Anyone? I have a couple of lookers, but no buyers? I need this gone so I can dedicate the time and $$$ tot he others. Let me know.



Register or Log In To remove these advertisements.

05-09-2007, 11:27 AM	#20
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: 1967 SWB stepper in NE AZ!! those are the lowback buckets found in some 88-98 pickups __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

05-09-2007, 07:52 PM	#21
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 1967 SWB stepper in NE AZ!! What city in Arizona are you in? Thanks

05-09-2007, 10:57 PM	#22
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! I live in the four corners area, not too awful far from you?

05-10-2007, 12:03 PM	#23
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! ttt

05-12-2007, 04:50 PM	#24
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 1967 SWB stepper in NE AZ!! TTT for a great guy! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

05-13-2007, 05:12 PM	#25
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: 1967 SWB stepper in NE AZ!! ttt for Mike, but would you take any trades or is your lot full? __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

Register or Log In To remove these advertisements.