New motor delivery delayed... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QWYKTRUK · 05-21-2007, 01:01 PM

I just heard from my engine builder that the Brodix aluminum block had some porosities that allowed 3 of the sleeves to move during the final hone. Brodix is sending a new block and sonic testing it beforehand.Its going to be at least another month before it gets shipped to me after the Dyno run. Here is a slideshow of the truck with an empty engine bay.
http://s153.photobucket.com/albums/s...1178039154.pbw

And a picture of the motor as it will look when it is assembled. I am changing the carbs to 850 Mighty Demons from Holleys.

The motor is a 427 cu. in . all alum. with 8-71 Blower Shop and Intercooler,Callies Magnum XL crank, raised cam /50mm roller cam bearing block ,custom oil pan and pick-up, billet oil pump- the list goes on and on.
aluminum C&A 6"rods, custom pistons, dual swap cam (new firing order-18726543) maxed out Brodix track 1 heads, chemical vapor deposition
coatings and some ceramic coatings as well.All internal parts and the block are cryo'ed. Supposed to come out at 1040 hp and 830 ft.lbs tq. We'll see!!

62ChevyStep · 05-21-2007, 07:21 PM

Breathtaking! Leaves me speechless everytime I see it, I can only hope mine even comes close to the quality and workmanship of yours. Great Job!!

19GMC63 · 05-21-2007, 07:24 PM

sweeeeeeeetttt! 1040 horses?!? wow

salazar44 · 05-21-2007, 07:26 PM

sweet... thats how mines looks, excepts its way different.

*Billla* · 05-21-2007, 07:32 PM

Quote:

Originally Posted by salazar44

sweet... thats how mines looks, excepts its way different.

And mine, but mine puts out something like 700 HP less

Seriously, nice engine!

hewlett2002000 · 05-21-2007, 08:25 PM

mine puts out about 250hp(if im lucky).

gulfcoast66 · 05-22-2007, 11:25 AM

Nice azz truck looking at that motor i get all warm and happy inside,lol but anyways nice rig!!

raiden7800 · 05-22-2007, 11:55 AM

So how many extra horsies did you gain from having that whole engine shiny?

QWYKTRUK · 05-22-2007, 01:55 PM

Quote:

Originally Posted by 62ChevyStep

Breathtaking! Leaves me speechless everytime I see it, I can only hope mine even comes close to the quality and workmanship of yours. Great Job!!

Thanks much. I like the looks of your's too. Something about the white with the big wheels!!

QWYKTRUK · 05-22-2007, 01:56 PM

Quote:

Originally Posted by raiden7800

So how many extra horsies did you gain from having that whole engine shiny?

No extra ponies, but since I'm a clean freak, it will keep me busy making sure it stays shiny!!

QWYKTRUK · 05-22-2007, 01:57 PM

Quote:

Originally Posted by gulfcoast66

Nice azz truck looking at that motor i get all warm and happy inside,lol but anyways nice rig!!

Thanks ! I feel the same way...

QWYKTRUK · 05-22-2007, 01:59 PM

Quote:

Originally Posted by Billla

And mine, but mine puts out something like 700 HP less

Seriously, nice engine!

Thanks. The last motor was 703 hp and it was fun, but I'm guessin' that 1000 will be lotsa fun!

QWYKTRUK · 05-22-2007, 02:04 PM

Dude, I'm still laughing at that quote!! I looked at your truck pictures and it looks like you are well on your way with that baby! It is a lot of work though isn't it?

Quote:

Originally Posted by salazar44

sweet... thats how mines looks, excepts its way different.

05-21-2007, 01:01 PM	#1
QWYKTRUK Registered User Join Date: Apr 2007 Location: AZ. Posts: 205	New motor delivery delayed... I just heard from my engine builder that the Brodix aluminum block had some porosities that allowed 3 of the sleeves to move during the final hone. Brodix is sending a new block and sonic testing it beforehand.Its going to be at least another month before it gets shipped to me after the Dyno run. Here is a slideshow of the truck with an empty engine bay. http://s153.photobucket.com/albums/s...1178039154.pbw And a picture of the motor as it will look when it is assembled. I am changing the carbs to 850 Mighty Demons from Holleys. The motor is a 427 cu. in . all alum. with 8-71 Blower Shop and Intercooler,Callies Magnum XL crank, raised cam /50mm roller cam bearing block ,custom oil pan and pick-up, billet oil pump- the list goes on and on. aluminum C&A 6"rods, custom pistons, dual swap cam (new firing order-18726543) maxed out Brodix track 1 heads, chemical vapor deposition coatings and some ceramic coatings as well.All internal parts and the block are cryo'ed. Supposed to come out at 1040 hp and 830 ft.lbs tq. We'll see!! Last edited by QWYKTRUK; 05-21-2007 at 01:02 PM.

05-21-2007, 07:21 PM	#2
62ChevyStep Senior Member Join Date: May 2005 Location: Portales, NM Posts: 359	Re: New motor delivery delayed... Breathtaking! Leaves me speechless everytime I see it, I can only hope mine even comes close to the quality and workmanship of yours. Great Job!! __________________ ________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5

05-21-2007, 07:24 PM	#3
19GMC63 Registered User Join Date: Nov 2006 Location: Nashville, TN Posts: 1,510	Re: New motor delivery delayed... sweeeeeeeetttt! 1040 horses?!? wow

05-21-2007, 07:26 PM	#4
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	Re: New motor delivery delayed... sweet... thats how mines looks, excepts its way different. __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

05-21-2007, 08:25 PM	#6
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: New motor delivery delayed... mine puts out about 250hp(if im lucky). __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

05-22-2007, 11:25 AM	#7
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: New motor delivery delayed... Nice azz truck looking at that motor i get all warm and happy inside,lol but anyways nice rig!!

05-22-2007, 11:55 AM	#8
raiden7800 Straight "6" Shooter Join Date: May 2007 Location: Salem, Oregon Posts: 105	Re: New motor delivery delayed... So how many extra horsies did you gain from having that whole engine shiny?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.