|
05-24-2007, 01:55 PM
|
#1 |
|
Senior Member
 Join Date: Jul 2005
Location: MISSOURI
Posts: 3,256
|
Fitting seats
I have a second row seat from a Tahoe. What would need changing or; take to fit the Tahoe seat into a c-10 to replace the original seat? Positive feed back would be real good. lol Thanks Larry
__________________
The biggest problem people have, is other people Thou shalt be cool and not hassle  Be a site supporter.  The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2 |
|
|
|
05-24-2007, 01:59 PM
|
#2 |
|
More Cowbell....
Join Date: Mar 2004
Location: Puckett, MS
Posts: 3,569
|
Re: Fitting seats
You will need to add a spacer in the rear to keep the headrest from rubbing your back wall/glass. I used about an inch. I think you can even get by with as little as 3/4". Other than that, I simply drilled a couple new holes in the floor & added large washers for strength.
__________________
There once was a member from Puckett.....Who ( fill in the blank blank blank ) bucket Last edited by Putter; 05-24-2007 at 02:01 PM. |
|
|
|
|
05-24-2007, 02:39 PM
|
#3 |
|
Senior Member
Join Date: Jul 2005
Location: MISSOURI
Posts: 3,256
|
Re: Fitting seats
 Well Well Well! Isn't that just tooo Kool! Same color as yours also. I'll listen to more of the cowbell for this help. lol...............Thanks Putter
__________________
The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
