any interest in parts from a 68 swb stepside with buddy buckets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 05-25-2007, 09:58 PM

the grille has some rust next to pass.side headlight . comes with parklight housings/pigtails and lens if i can find them $75.00. 1 small dent about halfway across bottom see pic.
i have added more pics. and getting ready to add more now.

billsbowtie · 05-25-2007, 09:59 PM

billsbowtie · 05-25-2007, 10:00 PM

heres small dent.

**uncle** · 05-25-2007, 10:00 PM

How much for the buckets? Any pics?

billsbowtie · 05-25-2007, 10:06 PM

this short step bed has had new lips put on where fenders bolt to bed in the past. drivers side has most of the bolts out of it. looks like they were taking it off to maybe sand and paint behind it. that it why it looks like it is away from the bed.it has a steel floor tailgate looks ok . see rust at the step on drivers side. it has a little dent pass.side at rear close to bumper. it would make a decent driver bed. if anyone want it i will take $275.00 and they take it off.

billsbowtie · 05-25-2007, 10:08 PM

dent at rear of bed.
i have not got to the buckets yet they are next. but they are dodge buckets in a chevy..

billsbowtie · 05-25-2007, 10:08 PM

billsbowtie · 05-25-2007, 10:08 PM

billsbowtie · 05-25-2007, 10:09 PM

billsbowtie · 05-25-2007, 10:09 PM

rust.

billsbowtie · 05-25-2007, 10:11 PM

here are the buddy buckets i think they are out of a dodge but can be maid to fit our trucks. drivers is in worst shape $250.00 no shipping.

billsbowtie · 05-25-2007, 10:11 PM

billsbowtie · 05-25-2007, 10:12 PM

billsbowtie · 05-25-2007, 10:12 PM

krue · 05-25-2007, 10:12 PM

Putter was looking for the taillight buckets iirc.

billsbowtie · 05-25-2007, 10:12 PM

billsbowtie · 05-25-2007, 10:13 PM

hood is good driver shape $75.00

billsbowtie · 05-25-2007, 10:13 PM

bagged7185 · 05-25-2007, 10:15 PM

how much for the buckets i would like to be put first in line if you can ship them.

krue · 05-25-2007, 10:15 PM

I brought putter's wtb ttt for ya.

billsbowtie · 05-25-2007, 10:17 PM

inside heater controls no broken levers $40.00 picked up or $50.00 shipped.

billsbowtie · 05-25-2007, 10:21 PM

sb v8 eng.towers $35.00 picked up or $50.00 shipped.
i will check on the tail light buckets tomarrow.

billsbowtie · 05-25-2007, 10:27 PM

i will list other parts in a few days as it comes apart. it has a rebuilt 6 lug ft.end. a 5 lug rear end cab is not to good but i have a good va. title with it.

LUV2XCLR8 · 05-25-2007, 10:36 PM

Bill,

What gears are in the 5 lugger? Posi?

billsbowtie · 05-25-2007, 10:43 PM

i have not got to that yet. i would like to get the bed off frist.

05-25-2007, 09:58 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	any interest in parts from a 68 swb stepside with buddy buckets the grille has some rust next to pass.side headlight . comes with parklight housings/pigtails and lens if i can find them $75.00. 1 small dent about halfway across bottom see pic. i have added more pics. and getting ready to add more now. Last edited by billsbowtie; 05-28-2007 at 08:48 PM.

05-25-2007, 09:59 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets

05-25-2007, 10:00 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets heres small dent.

05-25-2007, 10:00 PM	#4
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: any interest in parts from a 68 swb stepside with buddy buckets How much for the buckets? Any pics?

05-25-2007, 10:06 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets this short step bed has had new lips put on where fenders bolt to bed in the past. drivers side has most of the bolts out of it. looks like they were taking it off to maybe sand and paint behind it. that it why it looks like it is away from the bed.it has a steel floor tailgate looks ok . see rust at the step on drivers side. it has a little dent pass.side at rear close to bumper. it would make a decent driver bed. if anyone want it i will take $275.00 and they take it off.

05-25-2007, 10:08 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets dent at rear of bed. i have not got to the buckets yet they are next. but they are dodge buckets in a chevy..

05-25-2007, 10:09 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets

05-25-2007, 10:11 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets here are the buddy buckets i think they are out of a dodge but can be maid to fit our trucks. drivers is in worst shape $250.00 no shipping.

05-25-2007, 10:12 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets

05-25-2007, 10:12 PM	#15
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: any interest in parts from a 68 swb stepside with buddy buckets Putter was looking for the taillight buckets iirc. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-25-2007, 10:13 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets hood is good driver shape $75.00

05-25-2007, 10:15 PM	#19
bagged7185 Registered User Join Date: Mar 2007 Location: A cave Posts: 52	Re: any interest in parts from a 68 swb stepside with buddy buckets how much for the buckets i would like to be put first in line if you can ship them.

05-25-2007, 10:17 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets inside heater controls no broken levers $40.00 picked up or $50.00 shipped.

05-25-2007, 10:21 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets sb v8 eng.towers $35.00 picked up or $50.00 shipped. i will check on the tail light buckets tomarrow.

05-25-2007, 10:27 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets i will list other parts in a few days as it comes apart. it has a rebuilt 6 lug ft.end. a 5 lug rear end cab is not to good but i have a good va. title with it.



Register or Log In To remove these advertisements.

05-25-2007, 10:36 PM	#24
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: any interest in parts from a 68 swb stepside with buddy buckets Bill, What gears are in the 5 lugger? Posi? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-25-2007, 10:43 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: any interest in parts from a 68 swb stepside with buddy buckets i have not got to that yet. i would like to get the bed off frist.

Register or Log In To remove these advertisements.