2 swb beds f/s 1 is stepside & 1 is wide bed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-09-2007, 05:18 PM

this wide bed would make a good driver bed. it has a few dings/dents but soild. the worst hole in bed is in ft. of driver inner fender about the size of a 50 cent piece. cross suports are good. it has a dent near drivers tail light . the worst on out side is pass. side ft. top of bed looks like someone tried to fix a dent with filler. overall i would give this bed a good 6 1/2 or 7 from 1 to 10. $750.00 or if you want both beds i will take $900.00 for both.
[THE SHORT WIDE BED HAS BEEN SOLD . I STILL HAVE THE SHORT STEPSIDE BED I HAVE LOWERED THE PRICE TO $250.00 ON IT]

billsbowtie · 06-09-2007, 05:19 PM

billsbowtie · 06-09-2007, 05:19 PM

billsbowtie · 06-09-2007, 05:20 PM

billsbowtie · 06-09-2007, 05:20 PM

billsbowtie · 06-09-2007, 05:23 PM

heres the stepside bed it's a little better shape than i frist thought. it still has part of the wood floor under the steel floor. worst rust is on drivers side where it meets the step. drivers fender is almost took lose where po was taking it apart.i want $350.00 for this bed.

billsbowtie · 06-09-2007, 05:24 PM

billsbowtie · 06-09-2007, 05:25 PM

worst rust

billsbowtie · 06-09-2007, 05:25 PM

billsbowtie · 06-09-2007, 05:25 PM

billsbowtie · 06-09-2007, 05:28 PM

billsbowtie · 06-09-2007, 05:31 PM

i have a guy interested in the stepside bed .

billsbowtie · 06-09-2007, 05:32 PM

billsbowtie · 06-09-2007, 05:32 PM

billsbowtie · 06-09-2007, 05:36 PM

small
dent

billsbowtie · 06-09-2007, 05:36 PM

billsbowtie · 06-09-2007, 05:38 PM

billsbowtie · 06-09-2007, 05:39 PM

billsbowtie · 06-09-2007, 05:43 PM

billsbowtie · 06-10-2007, 10:13 PM

ttt

byrd · 06-10-2007, 10:23 PM

I have someone who might be interested in the fleet bed, could you get some better close pics of the floor, top and bottom and any rust present? You can email them to me if you want just PM and I will give you my email addy...Thanks,
Randy

billsbowtie · 06-10-2007, 10:57 PM

randy i will try to do that tomarrow i need to do it anyway. i will post them on this tread. how is your project coming along?

byrd · 06-11-2007, 05:49 AM

Slowly bill, very slowly at the moment

billsbowtie · 06-11-2007, 09:50 PM

i have several pics. to add but they are downloading slow tonite. bear with me.

billsbowtie · 06-11-2007, 09:59 PM

06-09-2007, 05:18 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	2 swb beds f/s 1 is stepside & 1 is wide bed. this wide bed would make a good driver bed. it has a few dings/dents but soild. the worst hole in bed is in ft. of driver inner fender about the size of a 50 cent piece. cross suports are good. it has a dent near drivers tail light . the worst on out side is pass. side ft. top of bed looks like someone tried to fix a dent with filler. overall i would give this bed a good 6 1/2 or 7 from 1 to 10. $750.00 or if you want both beds i will take $900.00 for both. [THE SHORT WIDE BED HAS BEEN SOLD . I STILL HAVE THE SHORT STEPSIDE BED I HAVE LOWERED THE PRICE TO $250.00 ON IT] Last edited by billsbowtie; 07-16-2007 at 03:14 PM.

06-09-2007, 05:19 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:19 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:20 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:20 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:23 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. heres the stepside bed it's a little better shape than i frist thought. it still has part of the wood floor under the steel floor. worst rust is on drivers side where it meets the step. drivers fender is almost took lose where po was taking it apart.i want $350.00 for this bed.

06-09-2007, 05:24 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:25 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. worst rust

06-09-2007, 05:28 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:31 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. i have a guy interested in the stepside bed .

06-09-2007, 05:32 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:36 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. small dent

06-09-2007, 05:38 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:39 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

06-09-2007, 05:43 PM	#19
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.



Register or Log In To remove these advertisements.

06-10-2007, 10:13 PM	#20
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. ttt

06-10-2007, 10:57 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. randy i will try to do that tomarrow i need to do it anyway. i will post them on this tread. how is your project coming along?

06-11-2007, 09:50 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed. i have several pics. to add but they are downloading slow tonite. bear with me.

06-11-2007, 09:59 PM	#25
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 2 swb beds f/s 1 is stepside & 1 is wide bed.

Register or Log In To remove these advertisements.