for those who have done 1 piece windows - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JJorgensen52** · 06-10-2007, 03:41 PM

I'm looking for some details about the filler piece that goes at the front of the window. Does it just hold the weatherstrip, or does the window actually fit inside of it? Also, how much space is the between that and the glass?

**John Fabris** · 06-10-2007, 04:35 PM

It is just a filler piece for the most part. It does hold the end of the weatherstrip, and roughly 1/4-1/2 inch of glass does slide thru it when all the way up.

**JJorgensen52** · 06-10-2007, 06:42 PM

Thanks

Forgot to mention in the first post, what holds the filler in place?
I'm looking into the possibility of using it to mount a mirror, but I'm wondering if there is enough room for the mounting / wiring, and if it can support the stresses involved

1LoC10 · 06-10-2007, 06:52 PM

**John Fabris** · 06-11-2007, 01:39 AM

It gets screwed into the existing bottom hole that was used for the wing window. As far as space, it is almost all open and unused. I would even consider putting tweeters in them....

cameeks · 06-11-2007, 02:50 AM

Quote:

Originally Posted by 1LoC10

I have been looking everywhere for those mirrors. All I can find are the Brothers mirrors and they are 1" x 4" for the rectangle and 3" for the round. Too small for me.

Sandemonium · 06-11-2007, 12:43 PM

1LoC10 if you don't mind can you tell us some more about those mirrors? Who are they made by? Where did you get them? How do they mount? Are they mounted by one stud / bolt or two?

Don't mean to hijack the thread but those are nice mirrors and a great reason to get the 1 piece windows with the triangles.

Thank you for your response.......

1LoC10 · 06-11-2007, 12:50 PM

Those are pics of mike nutts truck..... im pretty sure they are just motorcycle mirrors... check out an Arlen Ness catalog or even Ebay

06-10-2007, 03:41 PM	#1
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	for those who have done 1 piece windows I'm looking for some details about the filler piece that goes at the front of the window. Does it just hold the weatherstrip, or does the window actually fit inside of it? Also, how much space is the between that and the glass? __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

06-10-2007, 04:35 PM	#2
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: for those who have done 1 piece windows It is just a filler piece for the most part. It does hold the end of the weatherstrip, and roughly 1/4-1/2 inch of glass does slide thru it when all the way up. __________________ John Fabris 67 C10 SWB

06-10-2007, 06:42 PM	#3
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: for those who have done 1 piece windows Thanks Forgot to mention in the first post, what holds the filler in place? I'm looking into the possibility of using it to mount a mirror, but I'm wondering if there is enough room for the mounting / wiring, and if it can support the stresses involved __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

06-10-2007, 06:52 PM	#4
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: for those who have done 1 piece windows __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

06-11-2007, 01:39 AM	#5
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: for those who have done 1 piece windows It gets screwed into the existing bottom hole that was used for the wing window. As far as space, it is almost all open and unused. I would even consider putting tweeters in them.... __________________ John Fabris 67 C10 SWB Last edited by John Fabris; 06-11-2007 at 01:41 AM.

06-11-2007, 12:43 PM	#7
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: for those who have done 1 piece windows 1LoC10 if you don't mind can you tell us some more about those mirrors? Who are they made by? Where did you get them? How do they mount? Are they mounted by one stud / bolt or two? Don't mean to hijack the thread but those are nice mirrors and a great reason to get the 1 piece windows with the triangles. Thank you for your response.......

06-11-2007, 12:50 PM	#8
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: for those who have done 1 piece windows Those are pics of mike nutts truck..... im pretty sure they are just motorcycle mirrors... check out an Arlen Ness catalog or even Ebay __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.