mini starter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BCOWANWHEELS · 06-23-2007, 02:38 PM

i have a couple new 3 hp super h/d mini starters for sale.( biggest and most powerful available ) if your going to run the corvette ram horn exhaust manifolds this is a must or if you have a modified engine or just more cranking power this is the ticket also. i have a 383 stroker with 10.1 compression and when i shut off the engine while hot it took all the stock starter could do to recrank my engine so i installed one of these and no more problems. works with big blocks also..... comes with bolts, shims everything needed for install. 125.00 plus shipping
bob in tn.
1 423 384 8938

ChevyDude · 06-23-2007, 04:40 PM

These mini starters are awesome...I have one on my 71'.

Lizzard27 · 06-23-2007, 05:17 PM

any pics

Longhorn Man · 06-23-2007, 06:43 PM

are the mounting bolts straight across, or staggared?
Might be interested

jamesi20 · 06-23-2007, 10:24 PM

If the mounting holes are straight across,I would be interested also.are they for 153 or 168 tooth ?

eric72 · 06-23-2007, 10:33 PM

put me in line depending on bolt pattern and brand

BCOWANWHEELS · 06-24-2007, 12:37 AM

i,ll get some pic,s monday. work with 153 & 168 flywheels.
bob

BCOWANWHEELS · 06-25-2007, 04:58 PM

Bolt Pattern Is Straight Across.IF YOU WANT PIC,S. SEND ME YOUR EMAIL ADDRESS.
BOB

Southedisto · 06-25-2007, 05:00 PM

Quote:

Originally Posted by BCOWANWHEELS

Bolt Pattern Is Straight Across.

So it won't fit on a bellhousing mount.

Longhorn Man · 06-25-2007, 06:19 PM

straight across... sweet. Send me some pics at cockroach93@yahoo . com please.
I'm probably game for one.

BCOWANWHEELS · 06-25-2007, 10:43 PM

send pic,s tomarrow longhorn man

Longhorn Man · 06-26-2007, 12:30 AM

sweet, thanks

BCOWANWHEELS · 06-27-2007, 02:01 PM

only 2 left.
bob

Longhorn Man · 06-27-2007, 08:19 PM

I would like one, but it'll be this weekend before I have the fundage. If you can hold out for a couple days, that'd be sweet... if not, then I'll have to pass.
What would the total be to 43228? DHL ground would probably be cheapest and they can always find my place... UPS seems to get lost.

BCOWANWHEELS · 06-27-2007, 11:40 PM

longhorn man ,
set you one back. let me know when your ready for it. 1 left guys anybody need a h/d mini starter ?
bob

jamesi20 · 06-28-2007, 12:27 PM

ttt for ya Bob

BCOWANWHEELS · 06-28-2007, 12:53 PM

james got you covered.
bob

BCOWANWHEELS · 06-29-2007, 10:12 AM

only 1 left guys anybody need one ?
bob

06-23-2007, 02:38 PM	#1
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	mini starter i have a couple new 3 hp super h/d mini starters for sale.( biggest and most powerful available ) if your going to run the corvette ram horn exhaust manifolds this is a must or if you have a modified engine or just more cranking power this is the ticket also. i have a 383 stroker with 10.1 compression and when i shut off the engine while hot it took all the stock starter could do to recrank my engine so i installed one of these and no more problems. works with big blocks also..... comes with bolts, shims everything needed for install. 125.00 plus shipping bob in tn. 1 423 384 8938 __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 06-23-2007 at 02:39 PM.

06-23-2007, 04:40 PM	#2
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: mini starter These mini starters are awesome...I have one on my 71'. __________________ Alex 1971 Lil' Red 350 SBC 700R4

06-23-2007, 05:17 PM	#3
Lizzard27 Senior Member Join Date: Jun 2005 Location: Gladewater Tx. Posts: 382	Re: mini starter any pics

06-23-2007, 06:43 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: mini starter are the mounting bolts straight across, or staggared? Might be interested

06-23-2007, 10:24 PM	#5
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: mini starter If the mounting holes are straight across,I would be interested also.are they for 153 or 168 tooth ?

06-23-2007, 10:33 PM	#6
eric72 Registered User Join Date: Dec 2003 Location: georgia Posts: 212	Re: mini starter put me in line depending on bolt pattern and brand

06-24-2007, 12:37 AM	#7
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter i,ll get some pic,s monday. work with 153 & 168 flywheels. bob __________________ I BELIEVE IN JOHN 3:16

06-25-2007, 04:58 PM	#8
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter Bolt Pattern Is Straight Across.IF YOU WANT PIC,S. SEND ME YOUR EMAIL ADDRESS. BOB __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 06-25-2007 at 05:00 PM.

06-25-2007, 06:19 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: mini starter straight across... sweet. Send me some pics at cockroach93@yahoo . com please. I'm probably game for one.

06-25-2007, 10:43 PM	#11
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter send pic,s tomarrow longhorn man __________________ I BELIEVE IN JOHN 3:16

06-26-2007, 12:30 AM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: mini starter sweet, thanks

06-27-2007, 02:01 PM	#13
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter only 2 left. bob __________________ I BELIEVE IN JOHN 3:16

06-27-2007, 08:19 PM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: mini starter I would like one, but it'll be this weekend before I have the fundage. If you can hold out for a couple days, that'd be sweet... if not, then I'll have to pass. What would the total be to 43228? DHL ground would probably be cheapest and they can always find my place... UPS seems to get lost.

06-27-2007, 11:40 PM	#15
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter longhorn man , set you one back. let me know when your ready for it. 1 left guys anybody need a h/d mini starter ? bob __________________ I BELIEVE IN JOHN 3:16

06-28-2007, 12:27 PM	#16
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: mini starter ttt for ya Bob



Register or Log In To remove these advertisements.

06-28-2007, 12:53 PM	#17
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter james got you covered. bob __________________ I BELIEVE IN JOHN 3:16 Last edited by BCOWANWHEELS; 06-28-2007 at 12:53 PM.

06-29-2007, 10:12 AM	#18
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: mini starter only 1 left guys anybody need one ? bob __________________ I BELIEVE IN JOHN 3:16

Register or Log In To remove these advertisements.