Center hole Tach - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nbr1chinchilla · 06-26-2007, 02:48 PM

I have a dash cluster with the center hole tach.

Here are pics of the tach functioning in the truck. I believe it is in decent shape. No cracked glass. The chrome trim is peeled. No cracks. I would like to get $175 for it. PM me if interested.

Engine Off

Engine On

Removed From Truck

Luvlegs · 06-26-2007, 03:05 PM

Is it for a 6 or 8 cylinder? Not sure what it's worth but I'll jump in line.. pics and prices would be good.

nbr1chinchilla · 06-26-2007, 03:17 PM

its for a V8. I will get some pics when I get home tonight.

I also have the long box that is blasted and primed. It is in real good condition with very minimal denting. When it was blasted I did find one small area of bondo about 2" long and 1/2" tall just under the drivers side bed rail.

I will also get some pics of that.

I started on this project and just wont get it finished with some career changes and personal changes that have come up.

If there is a specific part you are interested in let me know and I will get pics. I have the complete truck that is in pieces.

Husker · 06-26-2007, 05:26 PM

Where ya at in Nebraska?
Ron

Longhorn Man · 06-26-2007, 06:01 PM

got photos of the truck before you ripped it apart?

nbr1chinchilla · 06-26-2007, 07:10 PM

Lincoln, NE

There are some photos on here under another thread i started when I bought it.

67subslead · 06-26-2007, 07:22 PM

Im interested in a gmc tail gate. pictures available ?

coast2coast · 06-26-2007, 11:06 PM

How much for the bed, minus the tailgate?

incoma · 06-27-2007, 12:13 PM

grill eyebrow trim?

nbr1chinchilla · 06-27-2007, 01:15 PM

i have added pics of the tach i will start new thread for other parts as the thread title here does not reflect the other parts i have pics of.

Luvlegs · 06-27-2007, 02:28 PM

I'll pass on the tach

*steveshow* · 08-30-2007, 02:14 PM

Do you still have the tach for sale? Also, I need the clips that hold the eyebrows on for my 71 GMC. I can't find these being reproduced anywhere, and all but one of mine were either rusted to pieces or broken...

meathead95 · 08-30-2007, 09:59 PM

ill do 175 shipped on the tach if the tach harness comes with it

nbr1chinchilla · 10-02-2007, 10:31 AM

My apologies for not being around for a while, other things came up to prevent me from moving these parts. I still have the dash cluster available. $175.

RicksTrucks · 10-02-2007, 10:56 AM

PM sent

HeavyD · 10-02-2007, 12:13 PM

I am interested if it is still available.

66skylarkpost · 10-02-2007, 12:21 PM

i just wanted to

from another nebraskan

nbr1chinchilla · 10-02-2007, 04:50 PM

Hello from Lincoln to Kearney. This item is sold pending receipt of payment.

meathead95 · 10-02-2007, 05:07 PM

did i get skipped?

**Classic Bowties** · 10-02-2007, 07:45 PM

Quote:

Originally Posted by meathead95

did i get skipped?

looks as though you made an offer, and it may have been overlooked.

06-26-2007, 02:48 PM	#1
nbr1chinchilla Registered User Join Date: Apr 2007 Location: Lincoln, Nebraska Posts: 53	Center hole Tach I have a dash cluster with the center hole tach. Here are pics of the tach functioning in the truck. I believe it is in decent shape. No cracked glass. The chrome trim is peeled. No cracks. I would like to get $175 for it. PM me if interested. Engine Off Engine On Removed From Truck Last edited by nbr1chinchilla; 06-27-2007 at 03:19 PM. Reason: add pics

06-26-2007, 03:05 PM	#2
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Center hole Tach Is it for a 6 or 8 cylinder? Not sure what it's worth but I'll jump in line.. pics and prices would be good. __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

06-26-2007, 03:17 PM	#3
nbr1chinchilla Registered User Join Date: Apr 2007 Location: Lincoln, Nebraska Posts: 53	Re: Center hole Tach its for a V8. I will get some pics when I get home tonight. I also have the long box that is blasted and primed. It is in real good condition with very minimal denting. When it was blasted I did find one small area of bondo about 2" long and 1/2" tall just under the drivers side bed rail. I will also get some pics of that. I started on this project and just wont get it finished with some career changes and personal changes that have come up. If there is a specific part you are interested in let me know and I will get pics. I have the complete truck that is in pieces. Last edited by nbr1chinchilla; 06-26-2007 at 03:20 PM.

06-26-2007, 05:26 PM	#4
Husker Registered User Join Date: Dec 1999 Location: Mid NE USA Posts: 2,222	Re: Center hole Tach Where ya at in Nebraska? Ron __________________ Member #111 68 C-10 Daily Driver 70 4x4 Project 76 Jeep CJ-5 Help Support the Board: http://67-72chevytrucks.com/vboard/payments.php He who knows nothing is closer to the truth than he whose mind is filled with falsehoods and errors. Thomas Jefferson

06-26-2007, 06:01 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Center hole Tach got photos of the truck before you ripped it apart?

06-26-2007, 07:10 PM	#6
nbr1chinchilla Registered User Join Date: Apr 2007 Location: Lincoln, Nebraska Posts: 53	Re: Center hole Tach Lincoln, NE There are some photos on here under another thread i started when I bought it.

06-26-2007, 07:22 PM	#7
67subslead Registered User Join Date: Jan 2007 Location: Edinburgh In. Posts: 27	Re: Center hole Tach Im interested in a gmc tail gate. pictures available ?

06-26-2007, 11:06 PM	#8
coast2coast Registered User Join Date: Oct 2006 Location: Strafford Missouri Posts: 217	Re: Center hole Tach How much for the bed, minus the tailgate?

06-27-2007, 12:13 PM	#9
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Center hole Tach grill eyebrow trim? __________________ "Green Monster" (Red Sox fan) 1970 GMC survivor, 350/200 4R, 3.42 rear gears, 2.5/4 drop, ECE disc brake conversion, powder coated suspension

06-27-2007, 01:15 PM	#10
nbr1chinchilla Registered User Join Date: Apr 2007 Location: Lincoln, Nebraska Posts: 53	Re: Center hole Tach i have added pics of the tach i will start new thread for other parts as the thread title here does not reflect the other parts i have pics of.

06-27-2007, 02:28 PM	#11
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: Center hole Tach I'll pass on the tach __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

08-30-2007, 02:14 PM	#12
steveshow Account Suspended Join Date: Aug 2007 Location: Austin, Tx Posts: 81	Re: Center hole Tach Do you still have the tach for sale? Also, I need the clips that hold the eyebrows on for my 71 GMC. I can't find these being reproduced anywhere, and all but one of mine were either rusted to pieces or broken...

08-30-2007, 09:59 PM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Center hole Tach ill do 175 shipped on the tach if the tach harness comes with it __________________ 72 2wd blazer 72 swb 4x4

10-02-2007, 10:31 AM	#14
nbr1chinchilla Registered User Join Date: Apr 2007 Location: Lincoln, Nebraska Posts: 53	Re: Center hole Tach My apologies for not being around for a while, other things came up to prevent me from moving these parts. I still have the dash cluster available. $175.

10-02-2007, 10:56 AM	#15
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: Center hole Tach PM sent __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4



Register or Log In To remove these advertisements.

10-02-2007, 12:13 PM	#16
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: Center hole Tach I am interested if it is still available. __________________ "You can take the man out of PA, but you can't take PA out of the man"

10-02-2007, 12:21 PM	#17
66skylarkpost Registered User Join Date: Mar 2006 Location: kearney,nebraska Posts: 443	Re: Center hole Tach i just wanted to from another nebraskan __________________ '70 k-10 longbox- mid 70's drivetrain 350/350 487x heads 10.1:1 flowmasters ,35's 3.73's auburn posi ,rear shackle flip. '72 short stepside U.S. forestry truck, '73 455 buick,400 turbo,dropped 2"-4 1/4" ,3.07 posi,:'89 silverado 1500 ,OK truck ,5.7 holley tbi ,trick 700r4 3.07 auburn posi ,and my '66 skylark ,'73 centurion and my '84 monte carlo imca stock car

10-02-2007, 04:50 PM	#18
nbr1chinchilla Registered User Join Date: Apr 2007 Location: Lincoln, Nebraska Posts: 53	Re: Center hole Tach Hello from Lincoln to Kearney. This item is sold pending receipt of payment.

10-02-2007, 05:07 PM	#19
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Center hole Tach did i get skipped? __________________ 72 2wd blazer 72 swb 4x4

Register or Log In To remove these advertisements.