72 4x4 suspension bolts source - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Virginia72SWB4X4 · 07-14-2007, 08:14 PM

I'm installing a 4" suspension kit on my 72 SWB 4x4. It's the first time the rear shackle bolts and leaf spring eye bolts had been removed. So, I boggered them up pretty good.

I've been looking around here in Fredericksburg, Va. and cannot find a source. Can anyone help with a source? Does GM still sell them?

Thanks in advance.
Gary

msgross · 07-14-2007, 09:12 PM

I just used 9/16" Grade 8 bolts and locknuts for my 68. I think I needed 4 ea of 5" and 2 ea of 4.5" but i'm not sure if yours are the same.

Rust Buster · 07-14-2007, 09:50 PM

I got mine from these guys in VA, but any automotive spring shop should have them.

http://www.rsautotruckspring.com/contactus/

72 CustomCamper · 07-14-2007, 11:26 PM

Hey Gary, Lane's didn't have anything?

Chuck

Virginia72SWB4X4 · 07-15-2007, 06:39 AM

Thanks Guys for the help.

I was thinking I could use grade 8 rather than the case hardened I removed. But I dont know the real difference.

I did try Lanes, but I asked for case hardened. If grade 8 is ok the think my search will be easier.

Gary

Mudder · 07-15-2007, 08:24 AM

I just used grade 8's on mine a few weeks ago.

msgross · 07-15-2007, 11:01 AM

I hope grade 8's are ok.... I don't plan on any hard core towing or loading hauling. I wish TSC carried 9/16's cause it would have saved a little money. They only have 1/2 and 5/8 in the bulk bins so I had to go to a machine shop to get mine. Lowes has them but at $4 per bolt I passed....

Virginia72SWB4X4 · 07-15-2007, 11:11 AM

I picked mine up this moring at Fredericksburg auto parts. I found the same thing at TSC, no 9/16th.

Gary

**special-K** · 07-15-2007, 12:11 PM

A real auto parts store will have these.Grade 8 is hardened and is exactly what tou need.Mike,relax

.

1969k10stepside · 07-15-2007, 02:28 PM

I have used grade 8 hardware on just about all of the 71 so far.Suspension,crossmembers,etc.I got the bolts from Rural King..

Musclerodz · 07-15-2007, 04:21 PM

I have used all Grade 8 hardware in my K5 rebuild bought from ACE Hardware.

Mike

Erl · 07-15-2007, 05:44 PM

Try http://www.mcmaster.com/

OLDCHEV4X4 · 07-16-2007, 07:11 AM

I got mine at McMaster carr too. You have to buy a pack of 5 though.

07-14-2007, 08:14 PM	#1
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	72 4x4 suspension bolts source I'm installing a 4" suspension kit on my 72 SWB 4x4. It's the first time the rear shackle bolts and leaf spring eye bolts had been removed. So, I boggered them up pretty good. I've been looking around here in Fredericksburg, Va. and cannot find a source. Can anyone help with a source? Does GM still sell them? Thanks in advance. Gary

07-14-2007, 09:12 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 72 4x4 suspension bolts source I just used 9/16" Grade 8 bolts and locknuts for my 68. I think I needed 4 ea of 5" and 2 ea of 4.5" but i'm not sure if yours are the same. __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-14-2007, 09:50 PM	#3
Rust Buster Registered User Join Date: Apr 2007 Location: Virginia Posts: 547	Re: 72 4x4 suspension bolts source I got mine from these guys in VA, but any automotive spring shop should have them. http://www.rsautotruckspring.com/contactus/ __________________ Maj USAF 71 K5 Blazer CST 72 K20 HT383 NV4500 Mass-Flo EFI 71 K10 LWB 52 Dodge Power Wagon 67 Dodge WM300 Power Wagon 48 Dodge WDX Power Wagon My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=239487

07-14-2007, 11:26 PM	#4
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Re: 72 4x4 suspension bolts source Hey Gary, Lane's didn't have anything? Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

07-15-2007, 06:39 AM	#5
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	Re: 72 4x4 suspension bolts source Thanks Guys for the help. I was thinking I could use grade 8 rather than the case hardened I removed. But I dont know the real difference. I did try Lanes, but I asked for case hardened. If grade 8 is ok the think my search will be easier. Gary

07-15-2007, 08:24 AM	#6
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: 72 4x4 suspension bolts source I just used grade 8's on mine a few weeks ago.

07-15-2007, 11:01 AM	#7
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 72 4x4 suspension bolts source I hope grade 8's are ok.... I don't plan on any hard core towing or loading hauling. I wish TSC carried 9/16's cause it would have saved a little money. They only have 1/2 and 5/8 in the bulk bins so I had to go to a machine shop to get mine. Lowes has them but at $4 per bolt I passed.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-15-2007, 11:11 AM	#8
Virginia72SWB4X4 Registered User Join Date: Jan 2004 Location: Fredericksburg, Virginia Posts: 144	Re: 72 4x4 suspension bolts source I picked mine up this moring at Fredericksburg auto parts. I found the same thing at TSC, no 9/16th. Gary

07-15-2007, 12:11 PM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 72 4x4 suspension bolts source A real auto parts store will have these.Grade 8 is hardened and is exactly what tou need.Mike,relax. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-15-2007, 02:28 PM	#10
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: 72 4x4 suspension bolts source I have used grade 8 hardware on just about all of the 71 so far.Suspension,crossmembers,etc.I got the bolts from Rural King..

07-15-2007, 04:21 PM	#11
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: 72 4x4 suspension bolts source I have used all Grade 8 hardware in my K5 rebuild bought from ACE Hardware. Mike __________________ Mike Redpath

07-15-2007, 05:44 PM	#12
Erl Registered User Join Date: Mar 2002 Location: Dallas, TX Posts: 555	Re: 72 4x4 suspension bolts source Try http://www.mcmaster.com/ __________________ 1968 GMC 305 V6 3/4 4x4 Stepside 06 Corvette Daily Driver Dallas TX

07-16-2007, 07:11 AM	#13
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: 72 4x4 suspension bolts source I got mine at McMaster carr too. You have to buy a pack of 5 though. __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.