Cruise Control? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Skruffy · 07-14-2007, 09:41 PM

I was hoping someone here could tell me if this a correct cruise control for our trucks?

I can take more detailed pics if necessary.

Also, and I hope I'm not violating any rule here - but if it is the real thing any idea of about what they are selling for? I bought it like ten years ago and forgot about it until I looked in the box today. Merry Christmas to me!

70c10 · 07-14-2007, 10:25 PM

I have no clue but that sure is CLEAN!

Longhorn Man · 07-14-2007, 10:41 PM

not for a 69/70... i know that much

69halfton · 07-15-2007, 08:50 AM

our generation even came with cruise control

i have never seen it.

LUV2XCLR8 · 07-15-2007, 10:38 AM

Yeppers, I have one, however not sure if it's the same, try to look at mine later 4 ya

FRENCHBLUE72 · 07-15-2007, 11:36 AM

Rod or john could tell ya for sure but to me it looks newer..

chipflyer · 07-15-2007, 11:44 AM

I believe it is a post 72 setup, very nice though and would work fine if installed.
Here is some good info from the FAQ section that covers the different cruise setups.

http://67-72chevytrucks.com/vboard/s...d.php?t=136867

Jeff

Bob Moore · 07-15-2007, 01:08 PM

That could very well be the 71/72 style cruise. They changed when the cable throttle control started. I have seen that style(with the bellows) on stock 72 set-ups. I don't know what changed for 73.

The change from rod to cable throttle dictated a change in the cruise as well. This uses a cable for the cruise.

Skruffy · 07-15-2007, 01:25 PM

Thanks for the FAQ link. It looks to me like the 1970 version, but like is mentioned there, if these things were dealer installed there is almost certainly a lot of variation.

Longhorn Man · 07-15-2007, 01:32 PM

i own a 70 with factory cruise, that looks nothing like a 70 factory c/c... dealer, maybe, but I would think the dealer stiff would have been much like... if not the same as, factory pieces.

chipflyer · 07-15-2007, 01:49 PM

The servo in that setup pictured was not used until after 1972.

Here is a picture of the 71-72 dealer installed cruise kit like the one that is installed on my 71. Note the difference in the servo and switch, that is the major difference .

Jeff

Skruffy · 07-15-2007, 03:34 PM

Geez, I appreciate everyone's help, but I think I'm more confused now. I think the one it looks most like is the one HuggerCST posted on the FAQ listed above, but who knows?

LUV2XCLR8 · 07-15-2007, 03:43 PM

Jeff,

Do u have a high res pick of that?

luv2xclr8@charter.net

chipflyer · 07-15-2007, 04:06 PM

That pic is actually Rods, from the FAQ section about cruise components that I posted earlier.
It was a very informative discussion in that thread and cleared up a lot of stuff about original cruise control equipment, at least for me anyway.

Here is the link again
http://67-72chevytrucks.com/vboard/s...d.php?t=136867

07-14-2007, 09:41 PM	#1
Skruffy Registered User Join Date: Aug 2005 Location: Central Illinois Posts: 187	Cruise Control? I was hoping someone here could tell me if this a correct cruise control for our trucks? I can take more detailed pics if necessary. Also, and I hope I'm not violating any rule here - but if it is the real thing any idea of about what they are selling for? I bought it like ten years ago and forgot about it until I looked in the box today. Merry Christmas to me! Attached Images Last edited by Skruffy; 08-25-2008 at 04:32 PM.

07-14-2007, 10:25 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Cruise Control? I have no clue but that sure is CLEAN! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-14-2007, 10:41 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Cruise Control? not for a 69/70... i know that much

07-15-2007, 08:50 AM	#4
69halfton Registered User Join Date: Apr 2007 Location: King City, Ontario, Canada Posts: 974	Re: Cruise Control? our generation even came with cruise control i have never seen it. __________________ - Jason If you can turn, Youre not going fast enough. Favorite caption: first car to 200 mph in the 1/4 mile, no parachute, drum brakes all the way around.. ..back when men were men.

07-15-2007, 10:38 AM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Cruise Control? Yeppers, I have one, however not sure if it's the same, try to look at mine later 4 ya __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-15-2007, 11:36 AM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Cruise Control? Rod or john could tell ya for sure but to me it looks newer.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 11:44 AM	#7
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Cruise Control? I believe it is a post 72 setup, very nice though and would work fine if installed. Here is some good info from the FAQ section that covers the different cruise setups. http://67-72chevytrucks.com/vboard/s...d.php?t=136867 Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

07-15-2007, 01:08 PM	#8
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: Cruise Control? That could very well be the 71/72 style cruise. They changed when the cable throttle control started. I have seen that style(with the bellows) on stock 72 set-ups. I don't know what changed for 73. The change from rod to cable throttle dictated a change in the cruise as well. This uses a cable for the cruise. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

07-15-2007, 01:25 PM	#9
Skruffy Registered User Join Date: Aug 2005 Location: Central Illinois Posts: 187	Re: Cruise Control? Thanks for the FAQ link. It looks to me like the 1970 version, but like is mentioned there, if these things were dealer installed there is almost certainly a lot of variation.

07-15-2007, 01:32 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Cruise Control? i own a 70 with factory cruise, that looks nothing like a 70 factory c/c... dealer, maybe, but I would think the dealer stiff would have been much like... if not the same as, factory pieces.

07-15-2007, 01:49 PM	#11
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Cruise Control? The servo in that setup pictured was not used until after 1972. Here is a picture of the 71-72 dealer installed cruise kit like the one that is installed on my 71. Note the difference in the servo and switch, that is the major difference . Jeff Attached Images __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 07-15-2007 at 01:56 PM.

07-15-2007, 03:34 PM	#12
Skruffy Registered User Join Date: Aug 2005 Location: Central Illinois Posts: 187	Re: Cruise Control? Geez, I appreciate everyone's help, but I think I'm more confused now. I think the one it looks most like is the one HuggerCST posted on the FAQ listed above, but who knows?

07-15-2007, 03:43 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Cruise Control? Jeff, Do u have a high res pick of that? luv2xclr8@charter.net __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-15-2007, 04:06 PM	#14
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Cruise Control? That pic is actually Rods, from the FAQ section about cruise components that I posted earlier. It was a very informative discussion in that thread and cleared up a lot of stuff about original cruise control equipment, at least for me anyway. Here is the link again http://67-72chevytrucks.com/vboard/s...d.php?t=136867 __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. Last edited by chipflyer; 07-15-2007 at 04:09 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.