I'm still scratching my head on this one! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ram-Man · 07-14-2007, 11:34 PM

I saw this today at the bad boyz car show. I only had my phone for a camera so its crappy quality. I guess it would work but why would you do it?

'68 longbed · 07-14-2007, 11:36 PM

took me a minute to figure out what i was looking at ....reverse flowed the heads.

I see it from time to time on motorcycles. to my knowlege it works fine. I'd do it just to be different.

**Stocker** · 07-14-2007, 11:40 PM

Quote:

Originally Posted by Ram-Man

I guess it would work but why would you do it?

Why? Because The more I looked at it, the bigger my smile got!

RACINJASON22 · 07-14-2007, 11:41 PM

Different to say the least! and Man it looks cool on that ride!

RJ22...

corn · 07-14-2007, 11:45 PM

You took a pic & showed people, thats why...

Ram-Man · 07-14-2007, 11:46 PM

Quote:

Originally Posted by corn

You took a pic & showed people, thats why...

You nailed it! What a conversation piece.

krue · 07-15-2007, 12:08 AM

69-350 · 07-15-2007, 04:18 AM

seen it done with a flathead once, i think it was on the net tho. I wonder how that works though? what about the valves, just have smaller intake, larger exaust valves now?

Bishops Trucks · 07-15-2007, 05:05 AM

Dare to be differant. That's what it's all about.

cdowns · 07-15-2007, 07:09 AM

i've seen a number of those type conversions over the years/ flathead fords buicks and chevys,, mostly they were done for rear engined rods and streamliners and indy cars

**FRENCHBLUE72** · 07-15-2007, 10:08 AM

Looks pretty cool seems like it would work well to get people talking

LUV2XCLR8 · 07-15-2007, 10:36 AM

68GMC454 · 07-15-2007, 12:16 PM

thats just cool...
billy

OlChev67 · 07-15-2007, 01:22 PM

I think that is really cool. maybe just turn the distributor or custom cam.

**special-K** · 07-15-2007, 09:18 PM

What?I don`t see anything unusual.Oh!!!Ha ha,the distributor.

eedgell · 07-15-2007, 09:46 PM

If so, then the intake valve is now exhaust, and the exhaust valve is intake? Not much to gain other than gossip.?

odie82 · 07-15-2007, 10:26 PM

I have seen that car around also, its always a conversation starter

Malo83 · 07-16-2007, 12:28 AM

Now that's Wicked

Imagine with 8 side draft Webers it must be a bear to tune and synch

redneckgirl · 07-16-2007, 01:26 AM

I'd love to hear it!!!

JAKES 68GMC · 07-16-2007, 08:15 AM

Thats friggin sweet, I bet it has one hellacious bark.

racerman85 · 07-16-2007, 10:16 AM

Is that the distributor on the front of the engine, in place of the waterpump? It looks like it to me... If so, it looks like he just runs the distributor off the front of the cam, but then what about the water pump? That is so amazing, in my opinion! What an awesome ride!

Scott68-93-97 · 07-16-2007, 10:56 AM

It looks like he may have run an electric water pump below the motor judging off the hoses on the side of the timing cover wear the water pump used to go, thats a cool ride, definently different.

**68 Stepside** · 07-16-2007, 05:19 PM

Absolutely wicked, I'd love to see more pics of that thing.

NONHOG · 07-17-2007, 05:05 PM

I guess that answer's the "can I run motorcycle carbs" ? even if it runs like crap (may not) it look's so cool it'd be worth it !

1LoC10 · 07-22-2007, 10:49 PM

07-14-2007, 11:34 PM	#1
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	I'm still scratching my head on this one! I saw this today at the bad boyz car show. I only had my phone for a camera so its crappy quality. I guess it would work but why would you do it? Attached Images __________________ Porterbuilt 8 Lugger http://67-72chevytrucks.com/vboard/s...d.php?t=691739

07-14-2007, 11:36 PM	#2
'68 longbed Registered User Join Date: Jun 2007 Location: mississippi Posts: 181	Re: I'm still scratching my head on this one! took me a minute to figure out what i was looking at ....reverse flowed the heads. I see it from time to time on motorcycles. to my knowlege it works fine. I'd do it just to be different.

07-14-2007, 11:41 PM	#4
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: I'm still scratching my head on this one! Different to say the least! and Man it looks cool on that ride! RJ22... __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

07-14-2007, 11:45 PM	#5
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: I'm still scratching my head on this one! You took a pic & showed people, thats why...

07-15-2007, 12:08 AM	#7
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: I'm still scratching my head on this one! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-15-2007, 04:18 AM	#8
69-350 Oil trash and damn proud of it Join Date: Aug 2005 Location: Williston, ND Posts: 1,993	Re: I'm still scratching my head on this one! seen it done with a flathead once, i think it was on the net tho. I wonder how that works though? what about the valves, just have smaller intake, larger exaust valves now? __________________ Mark 1997 K1500 Z71, 14 bolt SF 3.73 posi, Bright Blue Metallic. 6" Superlift 1972 C-10, toolbox, p/s, 350/TH350/3.73 open, black int., bronze 2008 Dodge MegaCab. H&S tuned 6.7 Cummins. Fast Four Tons Some of my pics http://s107.photobucket.com/albums/m294/69-350/

07-15-2007, 05:05 AM	#9
Bishops Trucks KEEP ON TRUCKIN' Join Date: Jun 2005 Location: Sterling, Va. Posts: 5,731	Re: I'm still scratching my head on this one! Dare to be differant. That's what it's all about. __________________ JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"

07-15-2007, 07:09 AM	#10
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: I'm still scratching my head on this one! i've seen a number of those type conversions over the years/ flathead fords buicks and chevys,, mostly they were done for rear engined rods and streamliners and indy cars __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 07-15-2007 at 09:04 AM.

07-15-2007, 10:08 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: I'm still scratching my head on this one! Looks pretty cool seems like it would work well to get people talking __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-15-2007, 10:36 AM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,476	Re: I'm still scratching my head on this one! __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-15-2007, 12:16 PM	#13
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: I'm still scratching my head on this one! thats just cool... billy __________________ honestly honey,,i have no idea how that truck got here.

07-15-2007, 01:22 PM	#14
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: I'm still scratching my head on this one! I think that is really cool. maybe just turn the distributor or custom cam.

07-15-2007, 09:18 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: I'm still scratching my head on this one! What?I don`t see anything unusual.Oh!!!Ha ha,the distributor. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-15-2007, 09:46 PM	#16
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: I'm still scratching my head on this one! If so, then the intake valve is now exhaust, and the exhaust valve is intake? Not much to gain other than gossip.? __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

07-15-2007, 10:26 PM	#17
odie82 Registered User Join Date: Jan 2004 Location: minnesota Posts: 349	Re: I'm still scratching my head on this one! I have seen that car around also, its always a conversation starter Attached Images __________________ 1982 chevy C-10, blue 2wd shortbox 17x9 cragar ss rims, 350V8-th400 2003 suzuki gsxr 1000-hit 175mph!!! yeah it's fast-no you can't ride it



Register or Log In To remove these advertisements.

07-16-2007, 12:28 AM	#18
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Re: I'm still scratching my head on this one! Now that's Wicked Imagine with 8 side draft Webers it must be a bear to tune and synch

07-16-2007, 01:26 AM	#19
redneckgirl Registered User Join Date: Jun 2006 Location: Bel Air, Maryland Posts: 4,853	Re: I'm still scratching my head on this one! I'd love to hear it!!! __________________ The place where you made your stand never mattered. Only that you were there... and still on your feet. Stephen King

07-16-2007, 08:15 AM	#20
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: I'm still scratching my head on this one! Thats friggin sweet, I bet it has one hellacious bark.

07-16-2007, 10:16 AM	#21
racerman85 Registered User Join Date: Nov 2006 Location: Windsor, PA Posts: 318	Re: I'm still scratching my head on this one! Is that the distributor on the front of the engine, in place of the waterpump? It looks like it to me... If so, it looks like he just runs the distributor off the front of the cam, but then what about the water pump? That is so amazing, in my opinion! What an awesome ride!

07-16-2007, 10:56 AM	#22
Scott68-93-97 Registered User Join Date: Jul 2006 Location: Fair Oaks, CA Posts: 475	Re: I'm still scratching my head on this one! It looks like he may have run an electric water pump below the motor judging off the hoses on the side of the timing cover wear the water pump used to go, thats a cool ride, definently different.

07-16-2007, 05:19 PM	#23
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Re: I'm still scratching my head on this one! Absolutely wicked, I'd love to see more pics of that thing. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-17-2007, 05:05 PM	#24
NONHOG Registered User Join Date: Feb 2007 Location: Marana, Arizona Posts: 3,416	Re: I'm still scratching my head on this one! I guess that answer's the "can I run motorcycle carbs" ? even if it runs like crap (may not) it look's so cool it'd be worth it ! __________________ "I feel the need for speed!"... as soon as I am done with my nap.

07-22-2007, 10:49 PM	#25
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: I'm still scratching my head on this one! __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

Register or Log In To remove these advertisements.