1969 GMC Stepside For Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

one9six9 · 07-15-2007, 09:42 PM

As much as I keep trying to tell myself that I can make time for this truck I can not. This was my daily driver up until about a week ago when I talked myself into taking the front clip off to start swapping parts over to a restored chassis that I bought from BowtieOgre. I now wish I had left it alone. It now sits without the front clip on it waiting to have the engine pulled. (That was the next step.) I kept going back and forth on keeping it or selling it, but the selling side has finally won out. The pictures are from before I removed the front clip. The 250 I6 ran fine, and the TH350 shifted great. It will need a new radiator core support, as do most, and the passanger side fender well will need replacing as well. There are some rust issues, but the truck is in great condition compared to most.
I'm not looking to part this truck out, and would like to sell it complete, because I still have the other chassis, and many other parts to sell.

The first $2500 takes the truck home. Ouch! I hate to see it go.

Keith

**special-K** · 07-15-2007, 09:47 PM

Looks like a nice one for $2,500.Anyone into making me a loan?

one9six9 · 07-15-2007, 09:55 PM

Bring me a total of $5000, and get everything I have for this truck. That includes the truck you see in the pictures as well as the lowered, restored chassis from BowtieOgre, and other goodies such as:

Solid Fender Wells, both left and right
Universal Wiring Harness
21-Gallon Poly Tank for under the bed
Automatic Tilt Column with Lokar Linkage
Rubber Bumpers for hood, doors, and glovebox
Front Deluxe Sidemarkers
Rear Deluxe Sidemarkers
Solid Battery Tray
Brake Backing Plates
Window Handles
Door Handles
Pedals Pads with Stainless Trim
Totally Stainless Body Bolt Kit
Stainless Bed Bolt, Only the eight that mount the bed to the frame
Cab Mounts
Radiator Mounts
Black Door Panels
Black Arm Rest
Black Dash Pad
Black Visors and Hooks
Door Gaskets
Vent Window Kit
Extra Vent Windows

This doesn't even scratch the surface of what the chassis has on it.

Keith

one9six9 · 07-15-2007, 10:05 PM

Here a breakdown for the chassis:

Front 5-lug Disc Conversion Kit w/ 2-1/2" drop spindles
(This includes new ball joints, tierod ends/sleeves, bearings, seals, and rotors)
2" Drop Springs on the front
4" Drop Springs on the back
1-1/2" Drop Blocks on the back
ECE Front Shock Relocator Brackets
ECE Rear Shock Relocator Brackets
ECE Front Sway Bar
ECE Super Track Bar
ECE Hidden Hitch
New Bump Stops front and back
ECE Drop Trailing Arm Crossmember
ECE Auto Trans Crossmember
Idler Arm
Pitman Arm
Upper Control Arm Shafts
Lower Control Arm Shafts
Caprice Rear Calipers and Pads (Yes, it has rear disc brakes)
Rear Rotors
Caliper Brackets
And of course a chassis with four tires and wheels on it. I think they are Rally-Truck, but I think they are only 15" x 7" with mismatched tires.

So, that is the truck, all the parts listed in my second post, and the whole chassis!! For $5000!!!
Why so cheap? The faster is leaves the faster I can over the pain of letting it go. Plus, if it all goes as a package I don't have try to store stuff in my already packed garage that my wife would like to park in again.

Oh yea, I have a bench seat that will need recovering too.

Keith

one9six9 · 07-16-2007, 10:37 AM

Nothing?

02_GMC_97_FIII · 07-16-2007, 02:06 PM

Bump for the afternoon for you. Looks like a good deal, wish I was closer would be very tempted and need many of those parts in the "other goodies" list.

If you happen to split some of them off:
-Stainless Bed Bolts
-Pedals Pads with Stainless Trim
-Black Dash Pad
-Vent Window Kit
-Passenger side fender well
-Stainless Body Bolt Kit
-Tilt Column (maybe)

My vote however would be to keep it, put back on the front clip, and run it.

Matt

LUV2XCLR8 · 07-16-2007, 03:33 PM

That's a deal

Alberta Newbie · 07-17-2007, 05:50 PM

Is this still for sale ? I'm interested...

Alberta Newbie · 07-18-2007, 01:22 AM

I'll take the truck, but I can't take the parts, it doubles the shipping cost.

**Hart_Rod** · 07-22-2007, 03:25 PM

bump, good luck with the sale

one9six9 · 07-23-2007, 02:45 PM

Sale Pending on truck, chassis, as well as all the parts listed.

Keith

**special-K** · 07-24-2007, 08:04 AM

That`s great.Good luck.

68 P.O.S. · 10-01-2007, 10:19 PM

Is this still available???

Alberta Newbie · 10-02-2007, 09:30 AM

Nope, sorry, it's parked in my garage.

LUV2XCLR8 · 10-02-2007, 03:51 PM

Quote:

Originally Posted by Alberta Newbie

Nope, sorry, it's parked in my garage.

toomanytoyz · 10-02-2007, 05:19 PM

Quote:

Originally Posted by Alberta Newbie

Nope, sorry, it's parked in my garage.

Did you buy the Whole Package, If so you Got a Heck of a Deal............

Thanks Rick

Alberta Newbie · 10-02-2007, 05:25 PM

I would have loved to buy the whole package, but I just took the truck. Shipping charges on two chassis was a bit much...

68 P.O.S. · 10-02-2007, 07:36 PM

That was a good deal...too bad I came late.

1969: How much for the chassis?

07-15-2007, 09:42 PM	#1
one9six9 Junior Member Join Date: May 2007 Location: Milton, FL Posts: 64	1969 GMC Stepside For Sale As much as I keep trying to tell myself that I can make time for this truck I can not. This was my daily driver up until about a week ago when I talked myself into taking the front clip off to start swapping parts over to a restored chassis that I bought from BowtieOgre. I now wish I had left it alone. It now sits without the front clip on it waiting to have the engine pulled. (That was the next step.) I kept going back and forth on keeping it or selling it, but the selling side has finally won out. The pictures are from before I removed the front clip. The 250 I6 ran fine, and the TH350 shifted great. It will need a new radiator core support, as do most, and the passanger side fender well will need replacing as well. There are some rust issues, but the truck is in great condition compared to most. I'm not looking to part this truck out, and would like to sell it complete, because I still have the other chassis, and many other parts to sell. The first $2500 takes the truck home. Ouch! I hate to see it go. Keith Attached Images Last edited by one9six9; 07-15-2007 at 09:43 PM.

07-15-2007, 09:47 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: 1969 GMC Stepside For Sale Looks like a nice one for $2,500.Anyone into making me a loan? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-15-2007, 09:55 PM	#3
one9six9 Junior Member Join Date: May 2007 Location: Milton, FL Posts: 64	Re: 1969 GMC Stepside For Sale Bring me a total of $5000, and get everything I have for this truck. That includes the truck you see in the pictures as well as the lowered, restored chassis from BowtieOgre, and other goodies such as: Solid Fender Wells, both left and right Universal Wiring Harness 21-Gallon Poly Tank for under the bed Automatic Tilt Column with Lokar Linkage Rubber Bumpers for hood, doors, and glovebox Front Deluxe Sidemarkers Rear Deluxe Sidemarkers Solid Battery Tray Brake Backing Plates Window Handles Door Handles Pedals Pads with Stainless Trim Totally Stainless Body Bolt Kit Stainless Bed Bolt, Only the eight that mount the bed to the frame Cab Mounts Radiator Mounts Black Door Panels Black Arm Rest Black Dash Pad Black Visors and Hooks Door Gaskets Vent Window Kit Extra Vent Windows This doesn't even scratch the surface of what the chassis has on it. Keith

07-15-2007, 10:05 PM	#4
one9six9 Junior Member Join Date: May 2007 Location: Milton, FL Posts: 64	Re: 1969 GMC Stepside For Sale Here a breakdown for the chassis: Front 5-lug Disc Conversion Kit w/ 2-1/2" drop spindles (This includes new ball joints, tierod ends/sleeves, bearings, seals, and rotors) 2" Drop Springs on the front 4" Drop Springs on the back 1-1/2" Drop Blocks on the back ECE Front Shock Relocator Brackets ECE Rear Shock Relocator Brackets ECE Front Sway Bar ECE Super Track Bar ECE Hidden Hitch New Bump Stops front and back ECE Drop Trailing Arm Crossmember ECE Auto Trans Crossmember Idler Arm Pitman Arm Upper Control Arm Shafts Lower Control Arm Shafts Caprice Rear Calipers and Pads (Yes, it has rear disc brakes) Rear Rotors Caliper Brackets And of course a chassis with four tires and wheels on it. I think they are Rally-Truck, but I think they are only 15" x 7" with mismatched tires. So, that is the truck, all the parts listed in my second post, and the whole chassis!! For $5000!!! Why so cheap? The faster is leaves the faster I can over the pain of letting it go. Plus, if it all goes as a package I don't have try to store stuff in my already packed garage that my wife would like to park in again. Oh yea, I have a bench seat that will need recovering too. Keith

07-16-2007, 10:37 AM	#5
one9six9 Junior Member Join Date: May 2007 Location: Milton, FL Posts: 64	Re: 1969 GMC Stepside For Sale Nothing?

07-16-2007, 02:06 PM	#6
02_GMC_97_FIII Registered User Join Date: Dec 2004 Location: Mequon, WI Posts: 186	Re: 1969 GMC Stepside For Sale Bump for the afternoon for you. Looks like a good deal, wish I was closer would be very tempted and need many of those parts in the "other goodies" list. If you happen to split some of them off: -Stainless Bed Bolts -Pedals Pads with Stainless Trim -Black Dash Pad -Vent Window Kit -Passenger side fender well -Stainless Body Bolt Kit -Tilt Column (maybe) My vote however would be to keep it, put back on the front clip, and run it. Matt __________________ '72 Chevy C10 Shortbox, 350/TH350 '08 Chevy Trailblazer SS 6.0L AWD 400HP

07-16-2007, 03:33 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,477	Re: 1969 GMC Stepside For Sale That's a deal __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-17-2007, 05:50 PM	#8
Alberta Newbie Registered User Join Date: Jul 2005 Location: Sherwood Park, Alberta Posts: 99	Re: 1969 GMC Stepside For Sale Is this still for sale ? I'm interested...

07-18-2007, 01:22 AM	#9
Alberta Newbie Registered User Join Date: Jul 2005 Location: Sherwood Park, Alberta Posts: 99	Re: 1969 GMC Stepside For Sale I'll take the truck, but I can't take the parts, it doubles the shipping cost.

07-22-2007, 03:25 PM	#10
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,846	Re: 1969 GMC Stepside For Sale bump, good luck with the sale __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-23-2007, 02:45 PM	#11
one9six9 Junior Member Join Date: May 2007 Location: Milton, FL Posts: 64	Re: 1969 GMC Stepside For Sale Sale Pending on truck, chassis, as well as all the parts listed. Keith

07-24-2007, 08:04 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: 1969 GMC Stepside For Sale That`s great.Good luck. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-01-2007, 10:19 PM	#13
68 P.O.S. Registered User Join Date: Jan 2007 Location: Puyallup, WA Posts: 1,662	Re: 1969 GMC Stepside For Sale Is this still available??? __________________ 72 C10 lwb fleetside -stock 350/350 combo

10-02-2007, 09:30 AM	#14
Alberta Newbie Registered User Join Date: Jul 2005 Location: Sherwood Park, Alberta Posts: 99	Re: 1969 GMC Stepside For Sale Nope, sorry, it's parked in my garage. __________________ Postal Code T8A 5V5

10-02-2007, 05:25 PM	#17
Alberta Newbie Registered User Join Date: Jul 2005 Location: Sherwood Park, Alberta Posts: 99	Re: 1969 GMC Stepside For Sale I would have loved to buy the whole package, but I just took the truck. Shipping charges on two chassis was a bit much... __________________ Postal Code T8A 5V5



Register or Log In To remove these advertisements.

10-02-2007, 07:36 PM	#18
68 P.O.S. Registered User Join Date: Jan 2007 Location: Puyallup, WA Posts: 1,662	Re: 1969 GMC Stepside For Sale That was a good deal...too bad I came late. 1969: How much for the chassis? __________________ 72 C10 lwb fleetside -stock 350/350 combo Last edited by 68 P.O.S.; 10-02-2007 at 07:38 PM.

Register or Log In To remove these advertisements.