ECE 4" rear drop coils, CPP adj panhard bar, mounting stud - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rin68 · 07-17-2007, 07:26 PM

For sale are some very low mile (<500 miles) parts off of my 68. I put these on about 3 yrs ago but obviously did not drive it much in that time. Recently changed to a 5" drop coil in the rear and the relocated ECE Panhard bar / mount to give the truck a more level stance. Anyway, parts are in great shape ready to run in your ride. Early Classic 4" rear drop coils $80 shipped

Classic Performance Products adjustable panhard par (w/poly bushings) and rear axle moutning stud $50 shipped

Paypal or money order accepted.

**special-K** · 07-17-2007, 07:50 PM

Adjustable Panhard Bar:Why did you change?Will this work for 6" drop?

sdkid · 07-17-2007, 10:26 PM

I'll take the coils. Pm sent.

1970bowtie · 07-17-2007, 10:33 PM

im considering the drop springs,but im not sure, i dont wanna go to low.im trying to get that level stance, my truck has 85 suspension under the front with 2 inches of drop i think. and the back is stock

rin68 · 07-18-2007, 07:25 AM

Quote:

Originally Posted by special-K

Adjustable Panhard Bar:Why did you change?Will this work for 6" drop?

ECE recommends their super track bar kit with 5" or greater drops because the par runs 'uphill' at those levels. Their kit moves one mounting point from the rear axle to the trailing arm using a longer bar and some relocating brackets.

Quote:

Originally Posted by sdkid

I'll take the coils. Pm sent.

PM replied to with paypal addy.

**special-K** · 07-18-2007, 07:26 AM

Ok,thanks.I guess i need the ECE then.

meathead95 · 07-18-2007, 08:16 AM

ill take the springs if they get to me

buffle · 07-18-2007, 10:50 AM

Are the panhard rod & bracket still available?

rin68 · 07-18-2007, 12:59 PM

Quote:

Originally Posted by buffle

Are the panhard rod & bracket still available?

yes panhard bar package is still for sale

sale pending on the springs (waiting on paypal to be sent)

sdkid · 07-18-2007, 05:52 PM

Payment sent by paypal. Thanks, Chris...

buffle · 07-18-2007, 11:12 PM

Would u do $40 shipped, if so pay pal on the way

rin68 · 07-25-2007, 07:40 PM

Quote:

Originally Posted by sdkid

Payment sent by paypal. Thanks, Chris...

Springs shipped, sent you a PM also.

Quote:

Originally Posted by buffle

Would u do $40 shipped, if so pay pal on the way

I'll do $40, PM sent with paypal address

DMARCUM123 · 07-25-2007, 11:42 PM

rin put me in line on the pan bar i'll take it

rin68 · 07-25-2007, 11:58 PM

Quote:

Originally Posted by DMARCUM123

rin put me in line on the pan bar i'll take it

Panhard bar setup is yours, buffle PM'd me and told me to shove it up my a#$ but its worth more if I sell it you. I don't appreciate his attitude much. Send $40 to a.heintz@insightbb.com, thanks for being courteous.

rin68 · 07-28-2007, 08:42 PM

panhard bar is sold.

just a note, buffle sent me the message mentioned above by mistake. it was intended for someone who has been not treating him well

buffle · 07-29-2007, 12:44 PM

Want to thank u for straigtening out post, say again I am sorry for any inconvenience I may have caused you.

truckmanc10 · 08-02-2007, 11:01 AM

if you still have the 4'drop coils please let me know. Thanks, Mike. my email address is kowal.me@pg.com

07-17-2007, 07:26 PM	#1
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	ECE 4" rear drop coils, CPP adj panhard bar, mounting stud For sale are some very low mile (<500 miles) parts off of my 68. I put these on about 3 yrs ago but obviously did not drive it much in that time. Recently changed to a 5" drop coil in the rear and the relocated ECE Panhard bar / mount to give the truck a more level stance. Anyway, parts are in great shape ready to run in your ride. Early Classic 4" rear drop coils $80 shipped Classic Performance Products adjustable panhard par (w/poly bushings) and rear axle moutning stud $50 shipped Paypal or money order accepted. __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

07-17-2007, 07:50 PM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud Adjustable Panhard Bar:Why did you change?Will this work for 6" drop? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 07-18-2007 at 07:27 AM.

07-17-2007, 10:26 PM	#3
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud I'll take the coils. Pm sent. __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

07-17-2007, 10:33 PM	#4
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud im considering the drop springs,but im not sure, i dont wanna go to low.im trying to get that level stance, my truck has 85 suspension under the front with 2 inches of drop i think. and the back is stock __________________ Justin 1970 c/10 short wide bed My build thread WTT 1970 chevy front end for 67/68 chevy front end WTT 2 15x10 american racing outlaw 2 wheels for 2 of the same in a 15x7 or 15x8

07-18-2007, 07:26 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud Ok,thanks.I guess i need the ECE then. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-18-2007, 08:16 AM	#7
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud ill take the springs if they get to me __________________ 72 2wd blazer 72 swb 4x4

07-18-2007, 10:50 AM	#8
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud Are the panhard rod & bracket still available?

07-18-2007, 05:52 PM	#10
sdkid Registered User Join Date: Sep 2004 Location: Pierre SD Posts: 1,533	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud Payment sent by paypal. Thanks, Chris... __________________ I think the world needs a drink... Help somebody...If you can....VanZant We're not wrong, we're not sorry, and its probably gonna happen again. That's the truth about men. Tracy Byrd Member# 13924 '70 c10, 350/350 '68 c10 250/4spd '68 c10 no eng/trans fac ps/pb/ac/at (future father/sons project) '48 Chevy Loadmaster

07-18-2007, 11:12 PM	#11
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud Would u do $40 shipped, if so pay pal on the way

07-25-2007, 11:42 PM	#13
DMARCUM123 Registered User Join Date: Sep 2006 Location: WAYNE, WV. Posts: 675	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud rin put me in line on the pan bar i'll take it

07-28-2007, 08:42 PM	#15
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud panhard bar is sold. just a note, buffle sent me the message mentioned above by mistake. it was intended for someone who has been not treating him well __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

07-29-2007, 12:44 PM	#16
buffle buffle Join Date: Sep 2004 Location: Independence, Mo Posts: 426	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud Want to thank u for straigtening out post, say again I am sorry for any inconvenience I may have caused you.

08-02-2007, 11:01 AM	#17
truckmanc10 Registered User Join Date: Aug 2006 Location: ohio Posts: 4	Re: ECE 4" rear drop coils, CPP adj panhard bar, mounting stud if you still have the 4'drop coils please let me know. Thanks, Mike. my email address is kowal.me@pg.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.