5 project trucks for sale DFW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bobvilla67** · 07-19-2007, 07:52 PM

I don't have the time to work on all of them,so I will offer them all for sale and see if there is any interest.let me know if more pics are needed.thanks

1.1967 C-30,133"WB,327/4spd on the floor,67 GMC front clip,has 72 disc brake running gear.needs ujoints,front brake lines,I have the parts,just need installed.it has some rust in the kick panels and cab corners. $550

2.1972 Custom 30,157"WB,402/400,was originally a 350/4spd on the floor.has some minor rust in the rocker/floorboard area.Midwest flatbed with electric crane in the bed. $1500

3.1967 C-10 LWB 283/3spd on the column.wood is gone in the bed,but not rusted out.there is some rust in the pass side fender,rad support,inner fender and in the kick panels. $500

4.1968 C-10 SWB Fleetside,no motor,trans or front clip.I had this one posted a few weeks back.a lot of people wanted the bed but I would like to get rid of it complete the way it sits. $1000 SOLD to Big Tex

5.I have decided to keep the k-20.

**bobvilla67** · 07-19-2007, 07:56 PM

more pics

1969k10stepside · 07-19-2007, 08:10 PM

Wish I was closer.I could use the 4wd chassis.TTT for you.

Dustin

jorgensensc · 07-19-2007, 09:50 PM

If the swb comes up for sale seperately, can I be first in line?
Hate to see it all go! Has the story changed on the Blazer?
Shawn

bighead · 07-20-2007, 12:05 AM

Do you know what axles and t case are in the K20 frame? Does it have front disk brakes? Any pics?

**bobvilla67** · 07-21-2007, 01:40 PM

Shawn,if I don't sell the 68 complete I think I will just hold on to it.No change on the Blazers.thanks

Bighead,i am keeping the 3/4 ton axles for my Blazer.has the 205 t-case and set up for an auto.also has the fleet bed on it.thanks

I am also willing to do some trading towards a complete 292 power steering set up on any of these trucks.

AuggieStyle · 07-21-2007, 02:22 PM

damn bobby are timing is off. i am going to stop by this week i hope i have not had a free moment i will call you before hand to make sure you will be around thanks.

RicksTrucks · 07-22-2007, 05:21 PM

Any pics of #5?

Chevyguy111786 · 07-22-2007, 05:35 PM

Do you have a title for the 68? where are you in dallas? this might get me in trouble but it's what i'm needin, actually i just need a frame... but this might be a start. rust?

LUV2XCLR8 · 07-22-2007, 05:55 PM

Clear title to #1?

It Run / Drive?

More pic's?

PM sent

**bobvilla67** · 07-23-2007, 05:24 PM

90/87formula,I am waiting on the title for the 67 c10,shouldn't be a problem.but if I can't get it I will end up parting it out.

Luv,I swapped the motor and trans from a 67 3/4 ton that was running last week,so I should have this one running this week.it does have a good title.I will get pics tomorrow,anything specific you want to see?thanks

Rick,I will get pics of the frame,it is straight with no damage.

the 68 swb is sold to Bigtex,he had replied to my earlier post and had come out to look at it last week.

LUV2XCLR8 · 07-23-2007, 05:55 PM

So what motor / tranny is in it? pic's? dunno, cab areas of distress

**bobvilla67** · 07-28-2007, 02:46 PM

getting the pics today.didn't get a chance all week.

Luv:it has the 327/4 spd in it.

**bobvilla67** · 07-28-2007, 05:58 PM

I will part out the 67 c30 and the 67 c10,let me know what you need and I will price it.both have good engines and are complete.thanks

bean · 07-28-2007, 07:01 PM

i'm looking for a straight passenger side rear fender for a short stepside. by any chance do you have one?

**bobvilla67** · 07-30-2007, 01:48 PM

Bean,no stepside fenders.

Primered_69 · 07-30-2007, 07:28 PM

How much would you want for the 327 w/o the trans? Does it work?

07-19-2007, 07:56 PM	#2
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: 5 project trucks for sale DFW more pics Attached Images __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

07-19-2007, 08:10 PM	#3
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: 5 project trucks for sale DFW Wish I was closer.I could use the 4wd chassis.TTT for you. Dustin

07-19-2007, 09:50 PM	#4
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 5 project trucks for sale DFW If the swb comes up for sale seperately, can I be first in line? Hate to see it all go! Has the story changed on the Blazer? Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-21-2007, 01:40 PM	#6
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: 5 project trucks for sale DFW Shawn,if I don't sell the 68 complete I think I will just hold on to it.No change on the Blazers.thanks Bighead,i am keeping the 3/4 ton axles for my Blazer.has the 205 t-case and set up for an auto.also has the fleet bed on it.thanks I am also willing to do some trading towards a complete 292 power steering set up on any of these trucks. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350 Last edited by bobvilla67; 07-21-2007 at 01:44 PM.

07-21-2007, 02:22 PM	#7
AuggieStyle Registered User Join Date: Apr 2007 Location: Dallas,TX. Posts: 499	Re: 5 project trucks for sale DFW damn bobby are timing is off. i am going to stop by this week i hope i have not had a free moment i will call you before hand to make sure you will be around thanks.

07-19-2007, 07:52 PM	#1
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	5 project trucks for sale DFW I don't have the time to work on all of them,so I will offer them all for sale and see if there is any interest.let me know if more pics are needed.thanks 1.1967 C-30,133"WB,327/4spd on the floor,67 GMC front clip,has 72 disc brake running gear.needs ujoints,front brake lines,I have the parts,just need installed.it has some rust in the kick panels and cab corners. $550 2.1972 Custom 30,157"WB,402/400,was originally a 350/4spd on the floor.has some minor rust in the rocker/floorboard area.Midwest flatbed with electric crane in the bed. $1500 3.1967 C-10 LWB 283/3spd on the column.wood is gone in the bed,but not rusted out.there is some rust in the pass side fender,rad support,inner fender and in the kick panels. $500 4.1968 C-10 SWB Fleetside,no motor,trans or front clip.I had this one posted a few weeks back.a lot of people wanted the bed but I would like to get rid of it complete the way it sits. $1000 SOLD to Big Tex 5.I have decided to keep the k-20. Attached Images __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350 Last edited by bobvilla67; 07-30-2007 at 02:08 PM.

07-20-2007, 12:05 AM	#5
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: 5 project trucks for sale DFW Do you know what axles and t case are in the K20 frame? Does it have front disk brakes? Any pics? Last edited by bighead; 07-20-2007 at 12:05 AM.

07-22-2007, 05:21 PM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: 5 project trucks for sale DFW Any pics of #5? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

07-22-2007, 05:35 PM	#9
Chevyguy111786 Registered User Join Date: Apr 2003 Location: Garland, Texas Posts: 1,127	Re: 5 project trucks for sale DFW Do you have a title for the 68? where are you in dallas? this might get me in trouble but it's what i'm needin, actually i just need a frame... but this might be a start. rust?

07-22-2007, 05:55 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 5 project trucks for sale DFW Clear title to #1? It Run / Drive? More pic's? PM sent __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-23-2007, 05:24 PM	#11
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: 5 project trucks for sale DFW 90/87formula,I am waiting on the title for the 67 c10,shouldn't be a problem.but if I can't get it I will end up parting it out. Luv,I swapped the motor and trans from a 67 3/4 ton that was running last week,so I should have this one running this week.it does have a good title.I will get pics tomorrow,anything specific you want to see?thanks Rick,I will get pics of the frame,it is straight with no damage. the 68 swb is sold to Bigtex,he had replied to my earlier post and had come out to look at it last week. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

07-23-2007, 05:55 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 5 project trucks for sale DFW So what motor / tranny is in it? pic's? dunno, cab areas of distress __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-28-2007, 02:46 PM	#13
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: 5 project trucks for sale DFW getting the pics today.didn't get a chance all week. Luv:it has the 327/4 spd in it. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

07-28-2007, 05:58 PM	#14
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: 5 project trucks for sale DFW I will part out the 67 c30 and the 67 c10,let me know what you need and I will price it.both have good engines and are complete.thanks __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

07-28-2007, 07:01 PM	#15
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: 5 project trucks for sale DFW i'm looking for a straight passenger side rear fender for a short stepside. by any chance do you have one?



Register or Log In To remove these advertisements.

07-30-2007, 01:48 PM	#16
bobvilla67 Registered User Join Date: Jan 2002 Location: Dallas,Tx.,USA Posts: 781	Re: 5 project trucks for sale DFW Bean,no stepside fenders. __________________ 1968 Custom 10 SWB 1970 2wd Blazer 350/400 1972 K20 292/350

07-30-2007, 07:28 PM	#17
Primered_69 Registered User Join Date: Sep 2002 Location: Fort Worth Posts: 1,409	Re: 5 project trucks for sale DFW How much would you want for the 327 w/o the trans? Does it work? __________________ 1969 Chevy LWB - with shaved handles; 3 1/2 front/ 5 1/2 rear drop; (waiting to be put back together)

Register or Log In To remove these advertisements.