What are your weekend plans?

[Rokcrln]

Well mine is to get my shop all finished up. I just went from a 60amp service for my house, shop and out house (12x20 two story) to a 400amp set up. This now gives me a full 200amps for the house and 200amps for the shop that will be split for the out house as well. Yesterday I finished the re-wireing of the shop and added (2) 50amp welder out lets, (1) 30amp air comp circut, (12) 120V 20amp out lets and I have alot of room left for more items down the road. Today I replaced a small section of the floor that was wood. I think it was the office for the old shop but now it is were I keep my tool box's, fridge, press and 36" break. The old floor was out of level and falling apart. So I tore out the old wood flooring and sub structure and built a steel structure then added 3/4" T&G ply with joist's 12" OC. I then paitned it with epoxy floor paint I had laying around. Later today I hope to clean the shop and put everything back were it goes. This way I can start on the next customer build first of the week.

So what are some of your plans for the weekend?

Kevin
LFD Inc.

[Rokcrln]

I can't wait to try out my welders with the new power! With only 60amps before between the house, shop and outhouse their is now way they were working to their full potential. Now with 200amps just in the shop they should sing. My Tig has never worked teh way it should but now I am hopfull it be able to use it alot more in my builds.

Kevin
LFD Inc.

[Ackattack]

Hopefully finish sandblasting my swb frame. Also go get the 72 C-20 that I'll be using for the cab. Probably try to get it running too.

Also going to a jeep show, and see what the grand cherokee can do on the RTI ramp!

[Metmanice]

Oh this weekend is FINALLY the install of a NEW porterbuilt dropmember.....

Been waiting like a month and a half for the time..

Any one in Colorado wanna help???

[Livrat]

If the weather cooperates I will be at the Pacific Northwest Nationals watching Top Fuel Dragsters and Funny cars!

Can't wait to feel the power, eyes going blurry and brains getting scrambled from the tunes of Nitromethane!!!

[PanelDeland]

I think I'll just sit here in awe of the amount of work Rokcrln can get done in just a couple hours.

[Hart_Rod]

I'm going rearrange my garage and to try to cram all my parts into the CrewCab before I leave for New Mexico.

[BACKYARD88]

I'm going to repair the front end of an 03 GMC(customer clipped a tree. Then if there's some time left I'll work on my frame and suspension some.

['68 longbed]

swappin the l'il motor for the big motor,

been spending all day today changing all the pumps, timing set, all the gaskets, and throwing some chevy orange around. the junkyard motor is super clean inside and has clearly had a recent rebuild. and a four bolt main .

so far so good.

[chevyboy55]

Trucks done so I'm going to service the wife's Durango,pressure wash the house,do yard work,try to catch up on stuff that has been neglected while playing trucks.I forgot to add that we have 3 nieces & nephews here that are all under 7yrs old so I'm going to make sure what ever I do it involves being outside with some sort of dangerous or at least semi dangerous equipment,(that way I will not have to hear can I help?)

[manimal]

Try to FINISH the BBQ trailer!
-Lance

[ksbeatty]

My cab is getting primed this weekend for pickup Sunday so I can get doors cleaned and ready to put back on. Maybe a little cleaning too. however the 90 degrees will slow me down. I want my 70 degrees back and some rains.

[bouncytruck]

If it would stop raining, we're going to a party at my friends house on Lake Tapps Saturday and Sunday is the Old Truck and Pickup Show at the XXX ROOT BEER Drive-in in Issaquah.

[Truck Hippy]

Everyone seems to be productive this weekend. Other than drinking a beer or 20 I think I'm with Panel on this one.

[texassquarebodies]

I am going to the Texas heat Wave show in Austin,Texas. It takes all day to walk and almost every kind of truck also. Trucks so high you can not reach the door and trucks so low most of the motor sticking through the hood. I am driving from Dallas, is a little drive and I will be very tired when I get home. I like to go and look for ideas I can use on my own ride....

Tony Kee
Texas Square Bodies

[Rokcrln]

Well I still have alot of clean up to do but it is so much better than it was. With the new wiring I was abel to remove some old structures that opened things up for my tool box's. Also I can now park on the floor if needed. I will also be spending alot of time with my wife and new son!

Kevin
LFD Inc.

[Ironhead]

I found the ambition to bolt my BB to the tranny and drop it in place this afternoon. A couple of hours and beers later, here's what it looks like...
But it's time to take the ribs & chicken off the grill and eat...

[bad6772]

got some buddies coming over to rewire my 2nd garage, then if we are not tanked,gonna finally get my cab off and get it ready to be media blasted. oh and i think i sold the g.t.o today < the wifes>, i really hate to do it but she has gotten 4 tickets this year in it and im just a little nervous of here getting hurt in it . just because i slam the gears she thinks she can,lol. it will be a sadd sadd day saturday. im trying to get her into a new truck,but well see i wish she would get an hhr, what am i saying i make the payments lol shell drive what is get her...........crap gotta go .....shes here lol

[Piece of Work]

Originally Posted by PanelDeland

I think I'll just sit here in awe of the amount of work Rokcrln can get done in just a couple hours.

Ditto!

-Mark

[MrShelley]

Was planning on riding my new motorcycle (Buell XB9SX) down to the Texas Heat Wave in Austin, but looks like the weather isn't going to cooperate.

[Billla]

Saturday, working on cleaning up my engine compartment a bit and fixing the rear windows in my '95 Impala SS.

Sunday, heading to the Triple X Root Beer show - even if it's raining

[ETsC10]

XXXRootbeer truck show in Issaquah, Washington... lookin' like maybe a dozen or so of us going...should be a gas!

[70C10Toejam]

I took today off, so my weekend started early. I got my Power Steering installed,and it works GREAT!!!!!!!!!!!!!!!!!!!

Hopefully my "manual steering elbow" will now go away!!!

As for the rest of the weekend...who knows.

[CG]

Number two son and me are going to swap out the bad engine tranny with good engine tranny into number one sons burb. Its his birthday on Monday so its our gift to him...besides I want it out of the barn. We are undecided as to whether we will clean all the bird doo off the body for him though.

Then again number two son doesn't always show up when he says he will so I may just sit on my rear.

[dan42]

Sounds like my son. I'm not gonna be very ambitious - I'm gonna install a stock tach in my truck and if Im motivated start to work on the window regulator removal. If I get ambitious.