72 door panel/wood insert questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

garypr1 · 07-27-2007, 01:37 PM

Hey all!! - I've been looking for black door panels for my 72 cheyenne super and I'm wondering anybody can tell me if there is a quality reproduction panel out there? I've heard that they're junk, that they have shrinkage/warpage and fit problems. theres a vendor on ebay (Item number: 160140053302) that states that his does not. anybody have any experience with this guy? what about the repo wood inserts? are they any good? my preference would be to find real nice originals if anybody has any. the panels and armrests on my truck are tan ones that have been dyed black. some of the black is chipping off and the door panel seems kind of dry and flaky around some of the screw holes. not sure how successfully they could be re-dyed if I decided to go that route. just recently bought my truck and am a newbie to the forum. appreciate any help you can give me!!

67CHIP72 · 07-27-2007, 03:24 PM

I'm looking too, for green. I'll watch this post. Ttt

powell72 · 07-27-2007, 05:54 PM

If you talk to the guys at www.thetruckshop.com they have the correct woodgrain inserts. They send out originals to get redone and they come back looking exact, even with the knot by the door handle like the factory. I've seen them in person and I can't see any difference.

sameyrasmea72 · 07-27-2007, 07:21 PM

I would stay away from any reproduction 72 door panel or inserts. JMO. How chalky are your door panels? Usually the darker the door panel, the better shape they are in. Parchment are the worst and seem to be the most chalky. I know of a guy who rebuilds originals and they come out very nice. And he rebuilds the inserts with GM wood grain.

These were my originals that were fairly chalky. He lightly bead blasts them and dyes them. They are @ $400 + good cores which seems high, but repros. Would cost $200 for the panels and @ 200 for the inserts.

garypr1 · 07-27-2007, 09:02 PM

those look really nice. can you give me the contact information for who did them?

hutch949 · 07-27-2007, 09:56 PM

I just went thru the same thing.I had green and wanted black and didnt want to dye them.So I took a chance last week and orderd some black panels( I had heard they dont fit well)but was told I could return them.I also orderd repo woodgrain.The woodgrain was a perfect fit to the orginals,the panels I had grind out just a tad so the woodgrain would fit on a couple of corners.Now the panels are not as good as the originals but they are not bad,I am ok with them.Dont ask to post pic because I dont have a clue how.You have to already have the stainless band off of your originals.Panels 129.00 and woodgrains 119.00 at Modern Muscle Classics. Hutch949

sameyrasmea72 · 07-27-2007, 10:07 PM

http://www.cs-m.com/index.htm

It is best to call him M-F during regular bussiness hours. Gary or Jesse

*72CSTC5* · 07-27-2007, 11:23 PM

Glad I read this, I was about to sell the woodgrain inserts that I have. I have two pair, the pair on my truck now and an extra set. I guess I will get a set redone.

72armyswbtruck · 07-28-2007, 01:15 AM

Nice looking trucks, too bad he doesn't list a price.

sameyrasmea72 · 07-28-2007, 01:52 AM

Quote:

Originally Posted by 72armyswbtruck

Nice looking trucks, too bad he doesn't list a price.

I know he sold the black one for $50,000. and was asking 45 for the red blazer.

SigX · 08-05-2007, 07:37 PM

sameyrasmea72 can you post some better pictures of the edges of the insert? I need to get a set re-done but it's for a show-truck and I need to be sure... It looks like they just put woodgrain tape on the flat surface and I'm wondering how the angled edges look.

07-27-2007, 01:37 PM	#1
garypr1 1972 Cheyenne Super SWB Join Date: Jul 2007 Location: Pleasanton, Ca Posts: 47	72 door panel/wood insert questions Hey all!! - I've been looking for black door panels for my 72 cheyenne super and I'm wondering anybody can tell me if there is a quality reproduction panel out there? I've heard that they're junk, that they have shrinkage/warpage and fit problems. theres a vendor on ebay (Item number: 160140053302) that states that his does not. anybody have any experience with this guy? what about the repo wood inserts? are they any good? my preference would be to find real nice originals if anybody has any. the panels and armrests on my truck are tan ones that have been dyed black. some of the black is chipping off and the door panel seems kind of dry and flaky around some of the screw holes. not sure how successfully they could be re-dyed if I decided to go that route. just recently bought my truck and am a newbie to the forum. appreciate any help you can give me!! __________________ 72 Cheyenne Super SWB 66 Corvette 427/390 05 Corvette Z51 (sold)

07-27-2007, 03:24 PM	#2
67CHIP72 STOLEN Join Date: Jun 2006 Location: Orange County Posts: 1,022	Re: 72 door panel/wood insert questions I'm looking too, for green. I'll watch this post. Ttt __________________ In Search Of Last edited by 67CHIP72; 07-27-2007 at 03:26 PM. Reason: typo

07-27-2007, 05:54 PM	#3
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: 72 door panel/wood insert questions If you talk to the guys at www.thetruckshop.com they have the correct woodgrain inserts. They send out originals to get redone and they come back looking exact, even with the knot by the door handle like the factory. I've seen them in person and I can't see any difference. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html Last edited by powell72; 07-27-2007 at 06:02 PM.

07-27-2007, 07:21 PM	#4
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: 72 door panel/wood insert questions I would stay away from any reproduction 72 door panel or inserts. JMO. How chalky are your door panels? Usually the darker the door panel, the better shape they are in. Parchment are the worst and seem to be the most chalky. I know of a guy who rebuilds originals and they come out very nice. And he rebuilds the inserts with GM wood grain. These were my originals that were fairly chalky. He lightly bead blasts them and dyes them. They are @ $400 + good cores which seems high, but repros. Would cost $200 for the panels and @ 200 for the inserts. Attached Images __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd

07-27-2007, 09:02 PM	#5
garypr1 1972 Cheyenne Super SWB Join Date: Jul 2007 Location: Pleasanton, Ca Posts: 47	Re: 72 door panel/wood insert questions those look really nice. can you give me the contact information for who did them? __________________ 72 Cheyenne Super SWB 66 Corvette 427/390 05 Corvette Z51 (sold)

07-27-2007, 09:56 PM	#6
hutch949 Registered User Join Date: Jun 2004 Location: Kernersville,N.C. Posts: 50	Re: 72 door panel/wood insert questions I just went thru the same thing.I had green and wanted black and didnt want to dye them.So I took a chance last week and orderd some black panels( I had heard they dont fit well)but was told I could return them.I also orderd repo woodgrain.The woodgrain was a perfect fit to the orginals,the panels I had grind out just a tad so the woodgrain would fit on a couple of corners.Now the panels are not as good as the originals but they are not bad,I am ok with them.Dont ask to post pic because I dont have a clue how.You have to already have the stainless band off of your originals.Panels 129.00 and woodgrains 119.00 at Modern Muscle Classics. Hutch949

07-27-2007, 10:07 PM	#7
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	Re: 72 door panel/wood insert questions http://www.cs-m.com/index.htm It is best to call him M-F during regular bussiness hours. Gary or Jesse __________________ 72 Cheyenne Super 80 Silverado Blazer 2wd Last edited by sameyrasmea72; 07-27-2007 at 10:10 PM.

07-27-2007, 11:23 PM	#8
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: 72 door panel/wood insert questions Glad I read this, I was about to sell the woodgrain inserts that I have. I have two pair, the pair on my truck now and an extra set. I guess I will get a set redone.

07-28-2007, 01:15 AM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: 72 door panel/wood insert questions Nice looking trucks, too bad he doesn't list a price. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

08-05-2007, 07:37 PM	#11
SigX Registered User Join Date: Jul 2007 Location: Redmond, Wa Posts: 23	Re: 72 door panel/wood insert questions sameyrasmea72 can you post some better pictures of the edges of the insert? I need to get a set re-done but it's for a show-truck and I need to be sure... It looks like they just put woodgrain tape on the flat surface and I'm wondering how the angled edges look. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.