WTB U-bolts and hardware for leaf springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Don Brace** · 07-29-2007, 01:50 PM

Need the four U bolts and mounting hardware for a leaf spring rear end. Will take just the U bolts if you have them. The U bolts are for a ten bolt that is in my Longhorn. They measure 8" long and fit over 2 1/2 " leaf springs. The U bolts are bent at right angles where they fit over the springs. Not round to fit over a rear end.
TIA

**jerry moss** · 07-29-2007, 02:05 PM

Don,
you might want to state which rear end you have,12 bolt, dana 44 or 60, or HO 52 or 72.i have a set of U bolt plates for a 12 bolt, 20 bucks delivered.

hgs_notes · 07-29-2007, 07:51 PM

I recently bought new U bolts for mine at the local parts store (auto value affiliate) for $20 for a set of four. Napa wanted like $15 each.

msgross · 07-29-2007, 07:53 PM

I had a set custom bent for $40

greenhorn male · 07-29-2007, 08:22 PM

Don, I have these used ones. They are only 7-1/2" long (measuring outside) and just a hair over 2-1/2" inside width. $15 to your door if they will work

**Don Brace** · 07-29-2007, 08:22 PM

Thanks for the info. I will check with the parts stores here in town. Still need the plates.

**Don Brace** · 07-29-2007, 08:24 PM

Greeenhorn
How do you want payment? I can Paypal or send check or MO.

greenhorn male · 07-29-2007, 08:27 PM

You can paypal to (ezapa007@yahoo.com) and PM me your mailing address and I'll send them out tomorrow after work. USPS priority

07-29-2007, 01:50 PM	#1
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	WTB U-bolts and hardware for leaf springs Need the four U bolts and mounting hardware for a leaf spring rear end. Will take just the U bolts if you have them. The U bolts are for a ten bolt that is in my Longhorn. They measure 8" long and fit over 2 1/2 " leaf springs. The U bolts are bent at right angles where they fit over the springs. Not round to fit over a rear end. TIA __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines. Last edited by Don Brace; 07-29-2007 at 06:59 PM. Reason: Additional information

07-29-2007, 02:05 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: WTB U-bolts and hardware for leaf springs Don, you might want to state which rear end you have,12 bolt, dana 44 or 60, or HO 52 or 72.i have a set of U bolt plates for a 12 bolt, 20 bucks delivered. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-29-2007, 07:51 PM	#3
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: WTB U-bolts and hardware for leaf springs I recently bought new U bolts for mine at the local parts store (auto value affiliate) for $20 for a set of four. Napa wanted like $15 each. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

07-29-2007, 07:53 PM	#4
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: WTB U-bolts and hardware for leaf springs I had a set custom bent for $40 __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

07-29-2007, 08:22 PM	#5
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Re: WTB U-bolts and hardware for leaf springs Don, I have these used ones. They are only 7-1/2" long (measuring outside) and just a hair over 2-1/2" inside width. $15 to your door if they will work Attached Images __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

07-29-2007, 08:24 PM	#7
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: WTB U-bolts and hardware for leaf springs Greeenhorn How do you want payment? I can Paypal or send check or MO. __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

07-29-2007, 08:27 PM	#8
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Re: WTB U-bolts and hardware for leaf springs You can paypal to (ezapa007@yahoo.com) and PM me your mailing address and I'll send them out tomorrow after work. USPS priority __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.