Help (other board) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71402BB · 09-24-2002, 09:19 PM

Hey I have a couple questions that I had posted on another board. Could someone help me out? heres the linkhttp://www.hostboard.com/cgi-bin/ultimatebb.cgi?ubb=forum&f=349

toms68cst · 09-24-2002, 09:23 PM

Which topic are you refering to? The link you posted only brings up GMCpaul's message board.

http://www.hostboard.com/cgi-bin/ult...bb=forum&f=349

71402BB · 09-24-2002, 09:27 PM

ya I have 2 threads on that board. My name is next to both of them...........

toms68cst · 09-24-2002, 09:28 PM

I presume you are talking about the cruise control question?

Don't most of them pick up speed off a magnet ty-wrapped to the drive shaft? Some of the newer ones are limited to using VSS vehicle speed sensor though. I don't know if that comes of the 700R4 or not.

71402BB · 09-24-2002, 09:30 PM

Yes that post and the engine building post....... It's ok to answer my question on that board also.......... Thanks for looking

wnc mountain · 09-24-2002, 09:37 PM

don't know if this will help or not but, I used to have a '80 chevy with cruise. it worked by a unit under the hood. I had to replace it once, pulled one from a Malibu. The speedo cable came up from the tranny, attached to the unit, then continued to the speedo head. I beleive that all the early chevy's worked this way.

Hope that helps.

09-24-2002, 09:19 PM	#1
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	Help (other board) Hey I have a couple questions that I had posted on another board. Could someone help me out? heres the linkhttp://www.hostboard.com/cgi-bin/ultimatebb.cgi?ubb=forum&f=349 __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

09-24-2002, 09:23 PM	#2
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,296	Which topic are you refering to? The link you posted only brings up GMCpaul's message board. http://www.hostboard.com/cgi-bin/ult...bb=forum&f=349 __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

09-24-2002, 09:27 PM	#3
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	ya I have 2 threads on that board. My name is next to both of them........... __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

09-24-2002, 09:28 PM	#4
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,296	I presume you are talking about the cruise control question? Don't most of them pick up speed off a magnet ty-wrapped to the drive shaft? Some of the newer ones are limited to using VSS vehicle speed sensor though. I don't know if that comes of the 700R4 or not. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

09-24-2002, 09:30 PM	#5
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	Yes that post and the engine building post....... It's ok to answer my question on that board also.......... Thanks for looking __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

09-24-2002, 09:37 PM	#6
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	don't know if this will help or not but, I used to have a '80 chevy with cruise. it worked by a unit under the hood. I had to replace it once, pulled one from a Malibu. The speedo cable came up from the tranny, attached to the unit, then continued to the speedo head. I beleive that all the early chevy's worked this way. Hope that helps. __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.