Need a mechanic - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 08-08-2007, 03:42 PM

Anyone in central Jersey a hobby mechanic?

centsless · 08-08-2007, 03:59 PM

What do you need done?

jb4short · 08-08-2007, 04:02 PM

two broken bolts taken out of a 350 block and power steering pump installed. Also could use the headers replaced

jb4short · 08-08-2007, 06:18 PM

and the power brake booster figured out/fixed

and "Stuff"

HELP!....have CASH and parts...LOL

jaros44sr · 08-08-2007, 06:23 PM

Do you guys work Sat. or Sun. ??? J.

jb4short · 08-08-2007, 06:55 PM

Quote:

Originally Posted by jaros44sr

Do you guys work Sat. or Sun. ??? J.

I'm willing to be at the shop....drink beer.....and pass wrenches

I'm pretty sure the PO is not on these boards because I spoke to him and the owner before him today trying to find out what sort of multi-year hybrid motor is in this thing......apparently neither of them could ever figure it out either and both sold it after a couple years ea. of tinkering.

Who drives a truck with a belt broken across the width of the tire that lifts the truck 2-3 inches every rotation? It's like a carnival ride

DennyB · 08-08-2007, 07:00 PM

Quote:

Originally Posted by Tri-ProAutomotive

I'm willing to be at the shop....drink beer.....and pass wrenches

I'm pretty sure the PO is not on these boards because I spoke to him and the owner before him today trying to find out what sort of multi-year hybrid motor is in this thing......apparently neither of them could ever figure it out either and both sold it after a couple years ea. of tinkering.

Who drives a truck with a belt broken across the width of the tire that lifts the truck 2-3 inches every rotation? It's like a carnival ride

Did they wear a red nose and big shoes when they drove it?

jb4short · 08-08-2007, 07:47 PM

Quote:

Originally Posted by DennyB

Did they wear a red nose and big shoes when they drove it?

Jc described it as a "Nice frame"

jc · 08-08-2007, 07:53 PM

Quote:

Originally Posted by Tri-ProAutomotive

Jc described it as a "Nice frame"

hey i had to say something nice!

jb4short · 08-08-2007, 08:03 PM

Quote:

Originally Posted by jc

hey i had to say something nice!

John...I begging you....come make it better

BTW...I found out the cab wasn't a big rust repair job...they missed the frame when trying to put it up on a lift and didn't notice until it had pretty much seperated the cab from the frame

jc · 08-08-2007, 08:20 PM

Quote:

Originally Posted by Tri-ProAutomotive

John...I begging you....come make it better

BTW...I found out the cab wasn't a big rust repair job...they missed the frame when trying to put it up on a lift and didn't notice until it had pretty much seperated the cab from the frame

sorry man, i cant take on any thing else right now , i have my own things that are not getting done and stressing me out.

besides the ride home from your place sucks @$$

if your gonna pull the front clip off, that would be a good time to get at the power steering bolts.

btw take the front bumper of FIRST. and you can pull the ft clip of in one piece.

jaros44sr · 08-09-2007, 07:00 AM

Which bolts are broken off? Are they broken clean to the block and nothing sticking out? Is there enough room to weld a nut on? Are you going to pull off the front end? Enough Questions yet? J.

jb4short · 08-09-2007, 07:41 AM

Quote:

Originally Posted by jaros44sr

Which bolts are broken off? Are they broken clean to the block and nothing sticking out? Is there enough room to weld a nut on? Are you going to pull off the front end? Enough Questions yet? J.

I got one bolt out this morning....and one of the brackets I have also goes to the motor mount....so I think I can get away with one block bolt

jaros44sr · 08-09-2007, 04:45 PM

Quote:

Originally Posted by Tri-ProAutomotive

I got one bolt out this morning....and one of the brackets I have also goes to the motor mount....so I think I can get away with one block bolt

OK, if you need help just shout... J.

jb4short · 08-09-2007, 05:07 PM

Quote:

Originally Posted by jaros44sr

OK, if you need help just shout... J.

Power steering is back together and I'm covered in grease....wife's gonna love this. If you understand transmission kickdown cables, etc. it still needs help that's beyond my scope of thrashing. It doesn't seem to shift....but I'm not sure I'm going fast enough with the Flintstone wheels on it

jaros44sr · 08-09-2007, 06:30 PM

Quote:

Originally Posted by Tri-ProAutomotive

Power steering is back together and I'm covered in grease....wife's gonna love this. If you understand transmission kickdown cables, etc. it still needs help that's beyond my scope of thrashing. It doesn't seem to shift....but I'm not sure I'm going fast enough with the Flintstone wheels on it

Is the cable hooked up to the carb linkage and then going to the trans., mite be adjustment. Willing to take a road trip, but on Vacation n/week.
Cool to see your getting into it, careful it's contagious. We could always have a meet at your place, like the old days... J.

Key is to degrease before you rebuild...LOL

jb4short · 08-09-2007, 07:31 PM

Quote:

Originally Posted by jaros44sr

Is the cable hooked up to the carb linkage and then going to the trans., mite be adjustment. Willing to take a road trip, but on Vacation n/week.
Cool to see your getting into it, careful it's contagious. We could always have a meet at your place, like the old days... J.

Key is to degrease before you rebuild...LOL

The meet is September 15th....don't miss it!!!

hmmmm......degrease first....

jaros44sr · 08-09-2007, 07:53 PM

Quote:

Originally Posted by Tri-ProAutomotive

The meet is September 15th....don't miss it!!!

hmmmm......degrease first....

Sounds cool, don't know how I missed that date

08-08-2007, 03:42 PM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Need a mechanic Anyone in central Jersey a hobby mechanic?

08-08-2007, 03:59 PM	#2
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: Need a mechanic What do you need done? __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

08-08-2007, 04:02 PM	#3
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Need a mechanic two broken bolts taken out of a 350 block and power steering pump installed. Also could use the headers replaced

08-08-2007, 06:18 PM	#4
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: Need a mechanic and the power brake booster figured out/fixed and "Stuff" HELP!....have CASH and parts...LOL

08-08-2007, 06:23 PM	#5
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,452	Re: Need a mechanic Do you guys work Sat. or Sun. ??? J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

08-09-2007, 07:00 AM	#12
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,452	Re: Need a mechanic Which bolts are broken off? Are they broken clean to the block and nothing sticking out? Is there enough room to weld a nut on? Are you going to pull off the front end? Enough Questions yet? J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.