B-U lamp connector missing something? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 longhorn BB · 08-10-2007, 11:42 PM

Hello, Is there a retainer or something that I am missing to ho0ld this connector on to the side of the TH400?

<a href="http://photobucket.com" target="_blank"><img src="http://i11.photobucket.com/albums/a197/chaaz0/backuplampconnector1.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

http://i11.photobucket.com/albums/a1...connector1.jpg

Has anyone got a picture of what is correct?

And what is the correct wire routing?

66skylarkpost · 08-10-2007, 11:52 PM

hello , actually thats the 12 volt lead for the electric kickdown/passing gear . the reverse light switch is on the lower part of the steering column . no retainer , just push it on until it locks on .

72 longhorn BB · 08-11-2007, 08:11 AM

Okay thanks, but I still need to know if there is some way of retaining it so it dose not fall off.

Also, where does the other end of the wire go to? I do not think this truck has any added circuity to power this. I thought I had a vaccum modulated system.

Can you help shed some light on this?

08-10-2007, 11:42 PM	#1
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	B-U lamp connector missing something? Hello, Is there a retainer or something that I am missing to ho0ld this connector on to the side of the TH400? <a href="http://photobucket.com" target="_blank"><img src="http://i11.photobucket.com/albums/a197/chaaz0/backuplampconnector1.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a> http://i11.photobucket.com/albums/a1...connector1.jpg Has anyone got a picture of what is correct? And what is the correct wire routing? __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"

08-10-2007, 11:52 PM	#2
66skylarkpost Registered User Join Date: Mar 2006 Location: kearney,nebraska Posts: 443	Re: B-U lamp connector missing something? hello , actually thats the 12 volt lead for the electric kickdown/passing gear . the reverse light switch is on the lower part of the steering column . no retainer , just push it on until it locks on . __________________ '70 k-10 longbox- mid 70's drivetrain 350/350 487x heads 10.1:1 flowmasters ,35's 3.73's auburn posi ,rear shackle flip. '72 short stepside U.S. forestry truck, '73 455 buick,400 turbo,dropped 2"-4 1/4" ,3.07 posi,:'89 silverado 1500 ,OK truck ,5.7 holley tbi ,trick 700r4 3.07 auburn posi ,and my '66 skylark ,'73 centurion and my '84 monte carlo imca stock car

08-11-2007, 08:11 AM	#3
72 longhorn BB Registered User Join Date: Jan 2000 Location: Michigan Posts: 312	Re: B-U lamp connector missing something? Okay thanks, but I still need to know if there is some way of retaining it so it dose not fall off. Also, where does the other end of the wire go to? I do not think this truck has any added circuity to power this. I thought I had a vaccum modulated system. Can you help shed some light on this? __________________ Chuck 1972 C-20 Longhorn 402 BB .030" over (409?), curved HEI, RV cam, quadrajet, dual 3" exhaust, TH 400 ported w/shift kit 1999 K1500 Suburban (old style) 5.7L Vortec 4L60E "No matter where you go, ........ there you are"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.